Eddie Bauer Measuring Tools & Sensors - Recent Questions, Troubleshooting & Support

Inside the battery door of the remote unit there is a switch to set the radio channel it will send on. On the back of the base unit is a button marked CH to set the channel it will receive. Be sure these are the same.

What units Marc and model for more specific answare

There were no manuals available online, but I managed to find you the Eddie Bauer product hotline number at :
by phone 24 hours a day 7 days a week
1-800-426-8020

They can walk you through the steps there, and possibly send you a free manual.

Hope this helps!
Remember to give me 4 Thumbs Up
for all the hard work to the Community! :D
~~Dayminner

LL means that the temp is too low. That also means that something is wrong with the sensor

These are abbreviations for the language you want to use for the day symbols. Use EN for English.

make sure unit is set for your "time zone" The adjustment button for pacific, central and eastern time zones is located on the back. Push the button until your specific time zone is reached.

When the clock is in time mode the temperature is in the lower right hand corner. In this mode pressing the down arrow button will cycle from celsius to fahrenheit to seconds and then back to celsius.

Same exact features, buttons and functions as this manual by Irwin.

http://www.irwin.com/uploads/documents/36_laser_tape_25.pdf

I want to use an old sensor forgiven during 30 years. I have no more manual, off course. Thanks for your answer

Most moisture meters measure the moisture content of wood or concrete is measured in percentages. So if the reading says 15 that means that there is a content of 15% moisture in the concrete.

Pressing the - (minus) button on the back toggles temperature units. Pressing + (plus) toggles barometric pressure units.