Dynacraft Cycling - Recent Questions, Troubleshooting & Support

pads bad? send a photo.

do an online search or go to fasenal

at the top of the frame where the tube fits in there is a bolt that you tighten up to clamp on the tube if you have none then it is missing

You have to set up sync. I could write it here but go to shimano.com and there are brilliant videos that talk you through gear sync. Very user friendly. No prior knowledge needed.

If it was here, I would tell you

I expect you need to find 16in wheels, you could always contact the manufacturer for more help: http://www.dynacraftbike.com/customerservice.php

The problem could be the coaster brake hub, it could be that the cranks are not properly adjusted, or any number of other weird things. My advise--take it to a bike shop. If they're kind, they should be able to get things moving in the proper circular motion quickly for a reasonable charge. If they're not kind, they'll laugh at the bike first, but they will still help.

there may be, but see if there is room to move rear axle back farther to take up slack. Loosen both nuts on axle pull wheel back centered and snug nuts up.

Yes. Loosen the two nuts on the back wheel. When they are loose just pull the wheel back until the chain is tight enough and tighten nuts while holding the tire in the proper position at the proper tightness of the chain. Make sure that the tire is running true when tightened.

You can contact dynacraft directly but you have to give them the serial number of the trike. http://dynacraftbikes.com/contactus.php

I have the razor scream machine which is made by the same manufacturer but dynacraft won't sell me the wheels unless I give them a serial number from their hotwheels powerslide model. Could you post the serial number on your trike? It would really help out myself and all the other scream machine owners who currently can't get replacement wheels.

Thanks,

-Alex