Dualit Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support
Dualit kettle switch is faulty. How do I get the switch out of the kettle?
you need to take the bottom off the kettkle and then you will be able to get to the back of the switch and see how its attatched and remove fasteners as needed and one end of the wires will need to be taken off. dont throw anything out until you look at the new switch because sometimes you dont get some little attatchment and then u will have the old set-up. hope it goes well. let us know how you do.
on Sep 27, 2019
My kettle keeps blowing the
If the fuse in the mains plug or MCB at the consumer unit / fuse box keeps tripping then there probably is a fault in the kettle element or switch. If the RCD is tripping (the safety device with the test button on it) then there is an electrical leak either due to a crack in the element or water has got into the wiring, switch or power cord of the kettle.
Allow the kettle to dry out in a warm place for a day. Also check it at another power outlet to eliminate any problem with the outlet you are using.
on Mar 10, 2019
The timer gets stuck and does'nt move anymore
Timer dials are easy to replace if you can find the part. Start with the manufacturer, but if that doesn't work trying Googling it. Any timer switch that will fit will work. It's just a simple switch.
One nut to hold it to the casing and two wires to connect it. It usually doesn't matter which wire goes where, but note their order when you take out the old one (take a cell phone photo) just to be sure.
on Oct 24, 2017
Not finding what you are looking for?