Are you still using WEP security? Most devices today no longer use WEP as it is inadequate for serious security. Most devices today are using WPA2 security. If you are no using the proper security you will get an authentication error even if the password is correct.
select (wipe data/factory reset) bush pushing the power button to select it and restart the device after. see less you can try a hard reset of Android device. To reset just follow the steps carefully below. 4) tap the power-on and volume up again at the same time until you see the System recovery menu.
That is very odd. The standard reset is what you have done. From powered down, press and hold volume up and the power button. If you can see the fully charged symbol though, it means your device is on, but the screen is blank. Cab you power it off? It is a troublesome make and others have similar problems. It makes you realise why Apple iPad is the brand leader :>)
Sep 16, 2016 - Uploaded by The_Ging
This video provides a step-by-step walkthrough to teach you how to replace the touch screen digitizer panel on ...
Dragon Touch M10X Screen Replacement: If the screen on your Dragon Touch M10X is damaged and needs replacing this guide will allow step by step instructions on how to replace the screen. ... Step 1 Screen. Remove the two screws from the top of the tablet as shown in the figure using a J0 philips head bit. Edit.