Dodge Logo

Dodge Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 796 Products
  • 332K Answers
  • 5M Views

This is not an error code. It pinpoints that other error codes might require your attention as it is an OCM (Occupant Classification-ECU) DTC present. The chances that the error is due to an uncalibrated seat. Get it read by a scanner, or take it to a dealer or car mechanic to reset.

2006 Dodge... | Answered on Apr 28, 2020


Here are the specs you require:
• Camshaft Sprocket Bolts 75 +1?4 Turn ft-lbs
• Camshaft Thrust Plate - Bolts 28 ft lbs - 250 in lbs
• Connecting Rod Cap -20+ 1/4 turn ft lbs
Here are the four steps you should take:
1. Cylinder Head Bolts* 45 ft-lbs
2. Cylinder Head Bolts* 65 ft-lbs
3. Cylinder Head Bolts* 65 ft-lbs
4. Cylinder Head Bolts* +1?4 Turn +1?4 Turn

Dodge Charger... | Answered on Apr 28, 2020


timing-skipped tooth on timing chain --fuel filter--egr--cat converter -throttle body --have scanned for a trouble code

Dodge Cars &... | Answered on Apr 25, 2020


My car got hit yesterday in the back on the rear right side of my 2008 Dodge Caliber is it worth fixing
4_24_2020_4_59_34_pm.jpg

Dodge Caliber... | Answered on Apr 24, 2020


Autodata technical data usually has pinout diagrams as does Haynes manuals (usually).

Dodge Cars &... | Answered on Apr 22, 2020


is the rear driveshaft still there?? sounds a bit odd to me. do you mean it wont move unless in 4wd? possible rear axle failure, missing driveshaft...yes people steal them

Dodge Cars &... | Answered on Apr 21, 2020


the firing order is 1 8 4 3 6 5 7 2 clockwise around the cap

Dodge Pickup... | Answered on Apr 20, 2020


Remove the transmission pan and you will see it right there. Looks like picture below.
3_1_2020_5_01_17_pm.png

Dodge Cars &... | Answered on Apr 15, 2020


my 96 caravan is doing the same thing as codsterdad19. i also noticed an oil leak above the starter but cant figure out what could be causing this. please stop my dinging oil alarm.

1998 Dodge Grand... | Answered on Apr 12, 2020


Remove the instrument cluster, remove it's paper backing, remove circuit board and resorder the points outlined in yellow in these pictures. You are only using a small amount of solder to reheat and melt the existing material that is probably cracked in order to re-establish connection. When replacing the board, make sure the 16 silver prongs are lined up correctly before pressing the board down.
4_12_2020_4_43_33_pm.jpg4_12_2020_4_43_34_pm.jpg4_12_2020_4_43_35_pm.jpg4_12_2020_4_43_36_pm.jpg

1998 Dodge... | Answered on Apr 12, 2020


Edit a video on this job. That is right you do not have to remove the alternator! You go in from underneath. Here’s a video on the job that I made about a week ago.Works for 1998, 1999, 2000 & 2001 Dodge Caravan’s, town and country and grand Voyager’s. https://youtu.be/CrG8vBuy4xE
3_26_2020_1_40_34_am.jpeg

2000 Dodge... | Answered on Apr 12, 2020


under the truck on the frame rail on drivers side

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5

2001 Dodge... | Answered on Apr 12, 2020


The Transmission Control Module is located inside the transmission at the rear of the case underneath the end cover. The Transmission Control Module is located in an E-Box in the plenum chamber on the driver-s side below the Engine Control Module (ECM).
https://www.autozone.com/repairguides/Audi-Cars-1999-05/Component-Locations/Transmission-Control-Module/_/P-0900c152801c0e73

Dodge Cars &... | Answered on Apr 07, 2020


Dodge Ram 1500 error code p1df3
P1DF3 Meaning
The Transmission Control Module (TCM) receives the status of the initialization state from the ESM on the Controller Area Network (CAN) bus while evaluating a counter in the TCM to determine if the initialization time is excessive.
https://www.engine-codes.com/p1df3.html?__cf_chl_jschl_tk__=b35edac9c502201c27f45404580734f8a6578d73-1586278852-0-AekqTwV27on102Xu2qgr7oX4oxgJ237SpWgNCyzQU1iAeqjNqW9xR8PLmXUoeKUy_c-ePZ8On_YJGvnAUT3luNUVIiBu7yQL9wv5TDEORK3JWmHMBxPgt7wyFcEYCsiSY_IHMDHu2OCakZMLTZeAOSGLVdlwt9VWB1-q0s7o_0cvP9XGxzEv6lJ8XEz8ZuZ59dRU1fIsz2uNsxDQP66Prgu8JdZAEV-Ui6FCCO8309sMbP80zswh7rMtoYQ2HrnN4wRt2afOR7FnHs_1IyuqXkCFjoeaIqyFLET1RAASJQjq

Dodge Cars &... | Answered on Apr 07, 2020


When you say that the fuel pump is good, do you mean that you did a pressure test on it and it was in specs or do you mean that it energizes? If it does engergize then I would do a pressure test on it to make sure that it has the strength to pump fuel from the fuel tank up to the engine.

2005 Dodge... | Answered on Apr 07, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,243 Questions

1999 Dodge Durango
1999 Dodge Durango

-935 Questions

1999 Dodge Ram
1999 Dodge Ram

1,750 Questions

2000 Dodge Durango
2000 Dodge Durango

1,576 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,472 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...