DISH Network Logo

DISH Network Recent Questions, Troubleshooting Help & Support

  • 50 Products
  • 3K Answers
  • 217K Views

Hi there! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help you. Please perform a hard reset on the receiver. To do a hard reset, you simply unplug the receiver from the power outlet it is connected to, leave it unplugged for 20 seconds, then plug it back in. The receiver reboot process takes about 5 minutes. Once the show is back on, try accessing your DVR again, if it is still not working, the receiver will need to be replaced. If this is still a problem, please feel free to email me at kimberly.escobar2dish.com with your account number so we can get this resolved.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network ViP... | Answered on May 24, 2020


https://www.youtube.com/watch?v=iyvBW5H88ow

DISH Network... | Answered on May 07, 2020


I had the same thing happen with my vip622 dvr, the fan ran constantly and the green light would flash...and no picture...well..I read through some things..and found out to get this receiver running correctly, you have to put it on a stand alone shelf with nothing on or around it..a milk crate underneath the table I have my TV on seems to have worked..for some reason this box can not be in an enclosed area...at all...having it sit all alone seems to be the only solution...I had to get a new HDMI cable to make it reach...but things seem to be fine now...(cross the fingers)!

DISH Network... | Answered on Apr 14, 2020


Hello this is Nick Franta from DISH. There are a couple of codes you can try. The following link will provide the available codes we have. You would need to hold the SAT button down until the top 4 buttons light up, enter the code, then #. The SAT button should flash 3 times when the code is successful.

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

Let us know if you need further assistance!

DISH Network IR... | Answered on Apr 14, 2020


the best thing to do is to call and ask your provider, they will have a form they can fill out for you to request specific programming, most pay-te;ecision companies are primarily occupied with acquiring high definition programming at this time though

DISH Network... | Answered on Apr 14, 2020


Consult operating agencies for help to a code for your tv report.

DISH Network IR... | Answered on Apr 09, 2020


It may be a virus in the system , take the system out for scanning and if it continues , get new antena / aerial which capture network with power.

DISH Network IR... | Answered on Apr 09, 2020


Look for an 'I' for info or 'display' button. Exact answer depends on tv make

DISH Network IR... | Answered on Apr 09, 2020


No codes needed just use the TV pairing wizard under the remote control settings. See the guide below...

DISH Network... | Answered on Mar 27, 2020


Call Dish and check if your service is active, then have them send a programming authorization hit to your 722.

DISH Network... | Answered on Mar 27, 2020


See the remote programming guide:

DISH Network... | Answered on Mar 27, 2020


Call Dish and have programming hit sent to your receiver. This will solve your problem.

DISH Network... | Answered on Mar 27, 2020


Go to Sys Info on the Joey, then Whole Home Network, select the Hopper you want to pair to and then click Link

DISH Network... | Answered on Mar 27, 2020


Call Dish to have a tech visit set up for you.

DISH Network... | Answered on Mar 27, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top DISH Network Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Brad Brown

Level 3 Expert

18402 Answers

Are you a DISH Network Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...