Dimplex Heating & Cooling - Recent Questions, Troubleshooting & Support


Refrigerant type and the weight needed will be on a sticker inside one of the side panels. You can't top up without gauges or evacuate the system without the recovery equipment. Likely R134a in it.

Dimplex DAC12005/9005 ' ProductReview.com.au

www.productreview.com.au > ... > Dimplex Portable Air Conditioners
Rating: 3.2 - ‎19 reviews
Dimplex DAC12005/9005 (Portable Air Conditioner): 3.2 out of 5 stars from 19 ... Our buying guide will explain which type of portable air conditioner would suit ... is for an indoor unit - Dimplex seem to have made subsequent models louder ... The R22 refrigerant will likely help (much more efficient than R410a and R134a) ...

Dimplex Heating... | Answered on Jul 12, 2020


In-heater fans are usually driven by open-framed synchronous motors that gather dust and their sintered bearings dry out and because the motor isn't powerful the increased friction causes them to run slow.
The fan blades also tend to gather a layer of dust that isn't helpful in maintaining performance.

Performance is usually restored after removing the motor and removing accumulated dust, cleaning and washing the grime from the bearings with solvent and applying machine oil to the felt surrounding the bearings and a drop or two into the bearings.

Dimplex Heating... | Answered on Jan 16, 2020


Start by getting a cheap volt/ohmmeter.
Open the unit up and follow the electric path from one side of the plug back to the other side. You will quickly find where the open is.
What you find will determine what needs to be fixed.
It may cost more than buying a new one.

Dimplex Heating... | Answered on Dec 04, 2019


Google (dimplex)(6900)(manual) without parens OR contact Dimplex directly to request it.

Dimplex Heating... | Answered on Aug 25, 2019


It is normal for the exhaust hose to be hot as it is transferring the heat from the room to the outside.
There should be no problem in insulating the hose, as I doubt the hose would melt, and this would make the whole system more efficient.

Dimplex Heating... | Answered on Jun 17, 2019


ZE-235L can be used to replace Canar RH series switche. You can find it on this link:
https://www.ceilingfanswitch.com/product/zing-ear-ze-235l

Dimplex DS5598... | Answered on Apr 12, 2019


got it locked out for dirty flame sensor prolly. or pressure switch open. remove and clean flame sensor rod. check pressure sw drain problem intake air not sufficent.

Dimplex Heating... | Answered on Mar 04, 2019


This manual may help
http://www.electricfireplacesdirect.com/pdfs/dimplex-techdoc-parts-service-stoves/CS3311.pdf
Manual does say if it over heats turn power off for 5 minutes and try turning back on.

Dimplex Compact... | Answered on Jan 13, 2019


If you have replaced the heater thermostat and the problem still the same, check the heater overload and the amperage of your heater. The actual amperage should not exceed the capacity of your overload or it will temporarily stop the heater once the overload reaches the capacity. If this is the case, replace the overload with a ten to fifteen percent higher capacity to have a continuous heater operation.

Dimplex Heating... | Answered on Jan 11, 2019

Not finding what you are looking for?
Dimplex Logo

643 questions posted

Ask a Question

Usually answered in minutes!

Top Dimplex Heating & Cooling Experts

Paul Carew

Level 3 Expert

3512 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Tom Palicke

Level 1 Expert

47 Answers

Are you a Dimplex Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...