Delphi Car Audio & Video - Recent Questions, Troubleshooting & Support

code is for sensor A bank 1 --circuit malfunction===causes wiring ---CMP sensor --- ECM
questions are --did you replace the correct sensor
did you check wiring and harness connections

Delphi Camshaft... | Answered on Jan 22, 2018

if engine is running with no faults it can be reset on a tec2 or just leave it after around 10-30 engine starts with no problems the light goes out.

Delphi... | Answered on Jul 23, 2017

what is this --computer hacking code
type english or go somewhere else

Delphi TNR800... | Answered on May 17, 2017

Could be throttle valve within the throttle body has gunked up and is catching the decent cable. Try changing tranny fluid & filter.
It can be the cause of many problems like that in transmissions.
Gives a false reading on the throttle position sensor causing irregular shifting.

Delphi... | Answered on Sep 08, 2016

Sorry to tell you this but no. The front one is more expensive then rear one. To save a little money If you have a Auto Zone near you have them do a diagnose of it may only be one and not both.

Delphi O2 Oxygen... | Answered on Nov 03, 2015

Knock sensor is located in rear right cylinder head below to the right of the coil assembly, basically behind the drivers firewall and engine block behind the head

Delphi Knock... | Answered on Apr 28, 2015

Not finding what you are looking for?
Delphi Logo

167 questions posted

Ask a Question

Usually answered in minutes!

Top Delphi Car Audio & Video Experts

Lawrence Oravetz

Level 3 Expert

10548 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33395 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Are you a Delphi Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides