DeLonghi Heating & Cooling - Page 2 - Recent Questions, Troubleshooting & Support

My delonghi air conditioner has the HI code. What does that mean? It works for a while then shuts off

Hit the plug reset

I had the same problem and found a fairly simple solution. UNPLUG THE UNIT FIRST. All left and right reference below is as view from the BACK of the unit (NOT from the front). Open the right side panel (right as view from the back), by removing six screws (remove screw covers first) and pull down on the panel to remove. Towards the UPPER-back of the unit, there is a cold air evaporator(?)(bunch of tubes and fins) you can only see the edge of it after removing the right panel. Below it is a white plastic drip tray with a hole at the end allowing water to pass down to the lower warm air radiator(?) (another bunch of tubes and fins) to evaporate. If this hole is obstructed, water will over flow and leak. I cleaned out the hole with a vacuum attached to a drinking straw, you might have a better way. After cleaning, I poured a little water through to make sure it drains. There is a lower drip tray at the bottom of the unit which catches the water and you can drain it out the bottom drain hole by unplugging the rubber stopper at the back bottom of the unit. The lower drip tray has a float switch (you can only see it by removing the back panel, which you don't have to do for this procedure) which turns off the unit when the lower tray is full. So, theoretically, even if the evaporation is not working properly, as long as the upper drain hole is not obstructed, there should not be any leakage, because the water will drain into the lower drip tray and turn the unit off when it is full. The upper drain hole obstruction might be causing most of the leakage problem. Also make sure the unit is level left to right. If the left side (left as viewed from the back) is lower than the right side (as view from the back) the water in the upper drip tray might not flow to the drain hole properly and might overflow. You should also vacuum and clean the upper plastis filter screen (pull it out from the top back of the unit). Before closing the right side panel, you might want to vacuum and clean the lower warm air radiator, be careful not to damage the fins. Again before you start any of this, UNPLUG THE UNIT FIRST. This might be easier than packing and sending the over 90 pounds unit to an out of town service center. I understand some service centers might charge $100 for a simple cleaning. Consult a trained technician if you don't have the skill to do this. Do this procedure at your own risk because I am not sure if it might void you warranty. Again UNPLUG THE UNIT FIRST before you start.

HELLO, THIS IS A SYSTEM WARNING ON AN AIR CONDITION ,THAT MEANS LOW CONDITION OR CONDITION LOW. THANKS

Hi. Four years late, but do you still need instructions for the Heller HPH15LED panel heater? If so, I can email you a scanned copy. This heater has one of worst user interface designs I have ever encountered on a domestic appliance. Totally non-intuitive -- you really need a manual!! Cheers - Mike

An E2 error indicates a problem related to the inlet cold water temperature sensor. The sensor may be sensing temperatures outside normal parameters or the sensor itself may be defective For more click here

have a Delonghi dishwasher DEDW645S which shows E1 error code on the front ... If so, can i have the full model number of the machine. For more click here

The high heat setting is affecting the plastic control panel, causing it to emit fumes.

2963 DELONGHI CPC505 AU 5417.7 KWH https://github.com/GosHawkTas/fridaynight/blob/master/postcodeData/3138.csv ..

This vehicle is not on board programmable and requires a qualified professional to program smart key remote fobs. 1. Locate an automotive locksmith in your area using the phone number or website below. 2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you. 3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob. Hopefully that gives you you answer you looking for.

DeLonghi CF210 Portable Air Conditioner Error code e6 ...

www.fixya.com > ... > DeLonghi CF210 Portable Air Conditioner

DeLonghi CF210 Portable Air Conditioner, error code e6 related issues. Get free help, solutions & advice from top DeLonghi experts.

Error e6 displaying on single split model one - Fixya

www.fixya.com/.../t4492271-error_e6_displaying_single_split_model

Apr 5, 2010 - Question about DeLonghi CF210 Portable Air Conditioner ... then the code error display E6 and the error code is Communication malfunction.

DeLonghi fix e6 error Air Conditioners Questions & Answers ...

www.fixya.com > Forum > Tags > fix e6 error > Air Conditioners

DeLonghi air conditioners fix e6 error related questions and answers. ... DelonghiFX400eco error code I Have the above air con unit 18 months old the cooling ...

DeLonghi CF210 Portable Air Conditioner Error code e6 split

Have a look at the bottom where the drain outlet is and measure the size of the outlet. Its probably a 3/4 inch or 1 inch

Would help to know what you are talking about? What shuts off? need info

might just need emptying

I believe what you call a "key" is the symbol for Temperature. Here is an example of a Delonghi Tower Heater below. https://www.manualslib.com/manual/1432776/Delonghi-Hfx85w20.html?page=4#manual

The Pinguino's exhaust pipe has to be attached to the window bracket to direct the air hot air out of the room, otherwise the room can't cool properly.
The owner's manual has several troubleshooting remedies for you to try:
1)  If the window is open, close the window. 2)  If there is a heat source in the room (burner, lamp, etc.), eliminate the heat source. 3)  If the exhaust hose is detached, connect the exhaust hose.  (My recommendation is to connect the exhaust hose to the window bracket and direct the air outside.) 4)  If the air filters are clogged, clean or replace the filters.
Remedies that aren't mentioned in the manual, but you might find helpful:
1)  Make sure that there are no kinks in the hose, and that the hose either remains straight or has a gentle curve when directing it into the window bracket.
2)  A sunny window reduces the maximum power and efficiency of the unit.  Placing it in a sunny window reduces your BTUs by at least 600, which means the maximum square footage of cooled space is reduced.  Cooling a kitchen requires at least 4,000 BTUs alone, which is nearly half of the unit's BTUs.  Try to place the unit by a window that receives minimum to no direct sunlight.
Finally, stating the obvious, if the room isn't cooling, the room is too large for the unit.  The PACL90 cools up to 400sqft.  Bear in mind that the air from these portable air conditioners cannot move around corners very well, so try to set it by a window in the central part of the room.

It's quite important for college students to know more about getting PhD. On https://essayclick.net/blog/how-to-get-a-phd you can read more about it