Dell Cycling - Answered Questions & Fixed Issues


.330meter
13.1102362204866 inch
333 millimeter = 0.333 meter
http://www.onlineconversion.com/length_common.htm
Re: Jeff

Dell Cycling | Answered on Apr 11, 2012 | 35 views


testing testing check 1 check 2 check check can we get some gain on line 2 ?

Dell Cycling | Answered on Mar 23, 2011 | 32 views


Mother nature invented bacteria.....

Anton van leeuwenhoek discovered it.

hope i was helpful

Dell Cycling | Answered on Jun 26, 2010 | 185 views


Hi there, do you mean transportation? If so that is a term used for traveling around in a vehicle or on a bike.


Dell Cycling | Answered on Jun 24, 2010 | 46 views


Rake is the angle of the front forks

Dell Cycling | Answered on Feb 05, 2010 | 35 views


Thats a sign that you need your brakes checked or adjusted.

Dell Dimension... | Answered on Nov 15, 2009 | 160 views


You my friend have a stripped free wheel.  The only solution is to get a new free wheel or just go out and get a new rear wheel all together. 

Dell Dimension... | Answered on Apr 13, 2009 | 186 views


If you shop around there are plenty of styles of handlebar. Might be worth you trying a bar from a dirt bike or some sort of cruiser bike.
Another option could be to tilt your existing bars back a small amount and add a fork stem riser. Sometimes simply raising the handlebar height on the fork top can help.

Cycling | Answered on Jul 16, 2020 | 63 views


I do not think this will help, but it might give you some ideas:

http://www.protecboardracks.com/products.aspx

Another design, that you would have to modify for your purpose but a very good idea:
http://www.woodcentral.com/articles/shop/articles_794.shtml

again use this principle and do your own drawings:

http://www.woodstore.net/lumstorrac.html

Cycling | Answered on Jun 27, 2020 | 690 views


I can't find a manual, but the install is pretty basic. You need to bolt it to the frame, then remove one of the sprockets on the derailleur to get the chain through, then replace. Attach the cable through the locking nut, using the lowest gear first, then run it to the highest gear to make sure it runs through them all. There are some set screws to set so that the derailleur doesn't go past the upper/lower gears. It's all a matter of adjustment from there.
Hope this is of help
Joe

Cycling | Answered on Jun 06, 2020 | 861 views


Here is the link for front derail...
https://www.amazon.com/SHIMANO-XT-FD-M786-Down-Swing-Derailleur/dp/B007HDMY2U/ref=sr_1_1?dchild=1&keywords=shimano+xt+front+derailleur&qid=1591136571&sr=8-1

Cycling | Answered on Jun 02, 2020 | 140 views


With square-taper cranks, the bottom bracket spindle length required is determined by the particular brand/model of crankset.
You can find the specifications online if you do a search using the brand/model of crankset. You will need a crank puller and bottom bracket tools to change it out. The main crankarm bolts should be tight, around 30 ft-lbs of torque.

Cycling | Answered on Apr 25, 2020 | 86 views


try manufacturer or online search

Cycling | Answered on Apr 23, 2020 | 70 views


you have to put the pad in it's 1st possiton then tighten the screws.

Cycling | Answered on Feb 19, 2020 | 123 views


FIXYA doesn't appraise items.

Might try joining a forum for Walther P.38 to ask for assistance.

http://www.p38forum.com/

Cycling | Answered on Jan 16, 2020 | 128 views


Actually there is nothing that you can fell like 0

Cycling | Answered on Jan 02, 2020 | 177 views


Toll-Free / 800-451-KENT (5368)
07054-3705

Cycling | Answered on Oct 28, 2019 | 185 views

Not finding what you are looking for?
Dell Logo

Ask a Question

Usually answered in minutes!

Top Dell Cycling Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34565 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you a Dell Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...