Dell Cycling - Recent Questions, Troubleshooting & Support

13.1102362204866 inch
333 millimeter = 0.333 meter
Re: Jeff

Dell Cycling | Answered on Apr 11, 2012

testing testing check 1 check 2 check check can we get some gain on line 2 ?

Dell Cycling | Answered on Mar 23, 2011

Mother nature invented bacteria.....

Anton van leeuwenhoek discovered it.

hope i was helpful

Dell Cycling | Answered on Jun 26, 2010

Hi there, do you mean transportation? If so that is a term used for traveling around in a vehicle or on a bike.

Dell Cycling | Answered on Jun 24, 2010

Rake is the angle of the front forks

Dell Cycling | Answered on Feb 05, 2010

Thats a sign that you need your brakes checked or adjusted.

Dell Dimension... | Answered on Nov 15, 2009

You my friend have a stripped free wheel.  The only solution is to get a new free wheel or just go out and get a new rear wheel all together. 

Dell Dimension... | Answered on Apr 13, 2009

If you shop around there are plenty of styles of handlebar. Might be worth you trying a bar from a dirt bike or some sort of cruiser bike.
Another option could be to tilt your existing bars back a small amount and add a fork stem riser. Sometimes simply raising the handlebar height on the fork top can help.

Cycling | Answered on Jul 16, 2020

I do not think this will help, but it might give you some ideas:

Another design, that you would have to modify for your purpose but a very good idea:

again use this principle and do your own drawings:

Cycling | Answered on Jun 27, 2020

I can't find a manual, but the install is pretty basic. You need to bolt it to the frame, then remove one of the sprockets on the derailleur to get the chain through, then replace. Attach the cable through the locking nut, using the lowest gear first, then run it to the highest gear to make sure it runs through them all. There are some set screws to set so that the derailleur doesn't go past the upper/lower gears. It's all a matter of adjustment from there.
Hope this is of help

Cycling | Answered on Jun 06, 2020

Here is the link for front derail...

Cycling | Answered on Jun 02, 2020

With square-taper cranks, the bottom bracket spindle length required is determined by the particular brand/model of crankset.
You can find the specifications online if you do a search using the brand/model of crankset. You will need a crank puller and bottom bracket tools to change it out. The main crankarm bolts should be tight, around 30 ft-lbs of torque.

Cycling | Answered on Apr 25, 2020

try manufacturer or online search

Cycling | Answered on Apr 23, 2020

Here are some things the book doesn't tell you:
You have to completely reset the speedometer and lose your odometer to reset the MPH. Hold both buttons for 3 secs to get reset. (Remember to use the left button to walk through the setup process and use the right button to change the settings.) First set the wheel size using Ideluna's settings above on this page (right button to change the setting and left button to go to next number). Next is MPH/KPH, after wheel size setting, push left button again and km flashes. Push right button to change the setting to MI. Next is TIME. Push left button and you'll see the time. Hold down left button till 24hr appears. Push right button to change to 12hr. Then push left button to go to flashing hour. Change with right button. Then left button to go to flashing minute. Right button to change minute, hold down to change minutes fast. Now you are set up. Now the process changes, use the right button to walk through the menu and use the left button to reset. Don't push both buttons anymore unless you want to reset everything again. If you want to reset something just hold the left button down until 0. When you are in SCAN mode, push the right button to go to Time, To go back to SCAN once, hold the right button down - It will scan everything once and return to TIME. To go to ODO, push right button once, push again for DST, push again for MXS, push again for AVS, push again for TM, push again for SCAN to stay in SCAN.

Cycling | Answered on Apr 03, 2020

Not finding what you are looking for?
Dell Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Cycling Experts


Level 3 Expert

85239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34472 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you a Dell Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides