Day-Timer Hardware & Accessories - Page 5 - Recent Questions, Troubleshooting & Support
How to repair a Defiant Motion Security Light.
try this
turn on the light at night
if it doesn't turn off after say 5 minutes (you should be able to set the stay on time)
switch off and back on
for most security light operations that action places it in the watch mode
the light will come on immediately but will go off after the set time period
from then on any intruder movement should set it on fort the set period of time
Brief power outage. Light timer not working.
If there was a brief power outage and your light timer is not working, there are a few steps you can take to troubleshoot the issue:
- Check the timer settings: Make sure that the timer is set correctly and that the time and program settings are accurate. If the timer has lost power, it may have reset and will need to be reprogrammed.
- Check the power source: Ensure that the timer is receiving power by checking the outlet or circuit breaker that it is plugged into. If the outlet or breaker has tripped, reset it and try again.
- Check the timer battery: If your timer has a battery backup, check the battery to make sure it is still functional. If the battery has died, replace it with a new one.
- Reset the timer: If none of the above steps have worked, try resetting the timer to its default settings. Refer to the user manual for instructions on how to reset the timer.
If the above steps do not resolve the issue, it's possible that the timer has been damaged due to the power outage. In this case, you may need to replace the timer or seek the assistance of an electrician to diagnose and repair the problem.
Sunquest pro 24 turned on and shut off after a few mins
Based on the symptoms you have described, it's possible that there may be an issue with the ballast or the lamp in your Sunquest Pro 24 tanning bed.
Here are some steps you can take to troubleshoot the issue:
- Check the power source: Ensure that the tanning bed is plugged into a working electrical outlet and that the outlet is supplying the correct voltage. You can use a voltage tester to check the voltage.
- Check the ballast: The ballast is a device that regulates the electrical current to the lamp. If the ballast is faulty, it may prevent the lamp from lighting up. Check the ballast for any visible damage or loose connections. If you're comfortable with electronics, you can also use a multimeter to check the ballast's continuity.
- Check the lamp: If the ballast is functioning correctly, the issue may be with the lamp. Check the lamp for any visible damage or dark spots. You can also use a continuity tester to check the lamp's continuity.
- Check the timer: If the timer is not functioning correctly, it may prevent the tanning bed from turning on or lighting up. Check the timer for any damage or loose connections.
If you're unable to identify the issue, it's best to contact a qualified technician or the manufacturer's customer service for further assistance. Tanning beds use high-voltage electrical components that can be dangerous if mishandled, so it's important to take proper precautions and not attempt to repair the tanning bed yourself unless you're experienced with electronics.
I have my ej500 set to turn on at sunset and off at sunup. however it turns off at 11 pm. How do I fix this?
The first thing you should check is that the time and location settings on your ej500 are correct. If they are incorrect, the timer may be turning off at the wrong time. Here's how to check:
- Press and hold the "clock" button on your ej500 timer for about 3 seconds until the display flashes.
- Use the "+" and "-" buttons to set the current time, making sure to set the correct AM/PM designation.
- Press the "clock" button again to confirm the time setting.
- Press and hold the "mode" button until the display shows "LAT" for latitude and "LON" for longitude.
- Use the "+" and "-" buttons to set your location's latitude and longitude. You can find this information by doing an internet search for your city's coordinates.
- Press the "mode" button again to confirm the location setting.
Once you have confirmed that the time and location settings are correct, try resetting the timer to its default settings by pressing and holding the "reset" button on the side of the device for about 3 seconds until the display flashes. Then, reprogram the timer to turn on at sunset and off at sunrise. Here's how to do that:
- Press the "prog" button on your ej500 timer.
- Use the "+" and "-" buttons to set the "on" time to "sunset" and the "off" time to "sunrise."
- Press the "prog" button again to confirm the programming.
If the timer still turns off at 11 pm instead of sunrise, it's possible that there is a malfunction with the device. In that case, you may need to contact the manufacturer for further assistance or consider purchasing a new timer.
I need an instruction mannual for the le saucier with the automatic dial
Le Saucier is a kitchen appliance that is used to make fresh butter and other creamy sauces. Without knowing the specific model of Le Saucier you have, it is difficult for me to provide an instruction manual for the automatic dial. However, here are some general instructions on how to use the Le Saucier:
- Assemble the Le Saucier according to the manufacturer's instructions. Typically, this involves attaching the paddle and placing the machine on a flat surface.
- Pour the cream into the Le Saucier. The amount of cream needed will vary depending on the size of the machine and the recipe you are following.
- Set the machine to the desired speed and let it run. The automatic dial may allow you to set a specific speed or program, depending on the model.
- After a few minutes, the cream will thicken and eventually turn into butter. Once the butter has formed, stop the machine and drain off any excess liquid.
- Use a butter churn or cheese cloth to remove any remaining liquid and shape the butter into a desired form.
If you are still having trouble with your Le Saucier or need a specific instruction manual, I recommend contacting the manufacturer or searching online for a downloadable manual.
Do you know where I can find a timer for a Westpoint DQP 12 set 9011
I'm sorry, but as an AI language model, I don't have access to information on specific product manuals or instructions. However, I can provide you with some general troubleshooting steps for a timer that is not working properly.
- Check the power source: Make sure the timer is properly plugged in or has a fresh battery if it's a battery-operated device.
- Check the settings: Verify that you have correctly set the timer for the designated time and that it is in the correct mode of operation.
- Reset the timer: If the timer is not working as intended, try resetting it to its default settings.
- Clean the timer: Dust and debris can affect the timer's functioning, so make sure to clean it thoroughly.
- Seek professional help: If none of the above steps work, it may be time to seek professional help or replace the timer.
If you are still having trouble finding a timer specifically for your Westpoint DQP 12 set 9011, I would recommend reaching out to the manufacturer or a professional technician for further assistance.
AMF Paragon TI Mite Timer - Model PLTI-O. How do you set the timer on it please?
Question edited for a lot more clarity.
Question moved from Office Equipment to Timers.
This timer has a fixed setting for turning on lights or appliances. To set the time, turn the small dial marked '8765' (which represent the hour when the lights will turn ON, so that the time you wish them to come on is next to the current time. In other words, if the current time is 6:00pm, and you want to have the lights come on at 8:00pm, set the 8 on the small dial next to the 6:00pm on the timer body, and plug everything in.
..
Would you please explain how to bypass the timer on a Smeg A2-2 Oven.
It is not recommended to bypass the timer on your Smeg A2-2 oven, as the timer is an important safety feature. However, if you still want to bypass the timer, here are the steps:
- Turn off the power to the oven at the main breaker.
- Locate the timer wires. In your case, there are 2 black pairs, 1 red pair, and a single white wire.
- Determine which wires are connected to the timer. These wires will be labeled "timer" or "clock."
- Cut the timer wires close to the timer unit.
- Strip the ends of the wires back about 1/2 inch.
- Twist together the wires that were previously connected to the timer.
- Cover the twisted wires with a wire nut.
- Wrap the wire nut and wires with electrical tape.
- Turn the power back on and test the oven.
Again, it is not recommended to bypass the timer on your oven, as this can be dangerous and may void your warranty. It is recommended to consult a professional technician or the manufacturer before attempting any repairs or modifications to your oven.
How to set timer to operate properly
To set your Garrison timer model 52-8817-6 to operate properly, you may need to adjust the time and the mode settings. Here are the steps you can follow:
- First, set the correct time on the timer. To do this, locate the "TIME" button and hold it down until the hour digits start to flash. Use the "+" and "-" buttons to adjust the hour, then press the "TIME" button again to move to the minute digits. Repeat the same process to set the correct minutes.
- Once you have set the correct time, you can then set the mode. To do this, locate the "MODE" button and press it until the desired mode is displayed. In your case, you will want to set the timer to the "PM" mode.
- Finally, set the on and off times for your device. To do this, locate the "PROG" button and press it to enter programming mode. Use the "+" and "-" buttons to set the on and off times for each day of the week.
If you have followed these steps and your timer is still not operating properly, you may need to consult the user manual or contact the manufacturer for further assistance.
Not finding what you are looking for?