Danco Home - Popular Questions, Answers, Tips & Manuals
The Danco Universal Faucet replacement handle
Get some Lock-tight formula to apply to the screw. Let it dry a few minutes after application. Naturally, after application of the solution, you have tightened the screw to its maximum. Do not be concerned about ever removing the screw as the material will loosens when you apply manual force.
I have a rebuild kit
The issue might be the tub diverter spout. Most such do not seal well. It is a matter of jiggling the spout knob. It should seal better with a little experimenting.
8/30/2017 4:42:03 PM •
Danco Home
•
280 views • 0 helpful votes
I installed stem and the valve will not shut cold water off that is running
If your having major issues, I would try to locate the main on/off valves at your water heater and pump/cold water line in the basement. One the water is shut off, I would try to check if there is a proper seal...as required concerning the stem. It's probably on of the old gaskets that was not remove and doubled up. Happened to me. Good luck!
www.youtube.com/watch?v=kM-TxozD-b4
HOW DO YOU ASSEMBLE AND INSTALL A DANCO 9S-4H/C
Turn off the water supplying the faucet. Now open the faucet. Remove handle by taking off index button and removing screw. You may need to purchase a handle puller, 10-15 dollars, and a stem wrench set. After removing handle, place appropiate sized wrench on stem and turn counter clockwise. Before installing stem, make sure it is in the open position. You may need to use the handle to turn the new stem. Screw in clockwise.
HOW DOES TEFLON TAPE WORK?
Looking into the opening in your pipe, wrap the tape on in a clockwise direction. The smaller the pipe, the less wraps. 1/8" to 3/8" I use 2-3 wraps. 1/2" to 3/4" use 4-5 wraps. Teflon fills any gaps or voids that may occur between the male and female threads.
7/17/2014 2:36:43 PM •
Danco CORP...
•
69 views • 0 helpful votes
Valley 3Z-6H/C
Put the large part of the spring into the plastic or rubber washer first, then insert into faucet. I use a little of petrolem jelly for easy instlation.
3z-6h/c
change cold cartridge call danco if you can
Not finding what you are looking for?