Danby Washing Machines - Recent Questions, Troubleshooting & Support

Most washers of my experience have at least one programme that stops the wash, leaving water in the tub until the programmer is advanced a notch by hand when it will pump out and enter the rinse/spin cycles.

I suggest you reread the instructions just to be clear whether there is a fault.

Danby Washing... | Answered on May 06, 2020

check to see if 'closed lid switch' is working.

Danby Washing... | Answered on Aug 07, 2019

Maybe it’s a dual action agitator where top turns independently of the bottom. Gears inside agitator may be stripped out.

Danby Washing... | Answered on Oct 15, 2018

User Guide here. At the back of this guide is a phone number to contact Danby for parts. I was unable to locate a source otherwise.
Hope this helps.

Danby DWM5500W... | Answered on May 02, 2018

Since you are dealing with a gas appliance and any gas appliance could blow I strongly suggest contact your gas company and have them come out and help you with this.

Danby Washing... | Answered on Feb 04, 2018

you have a new washer so why not get the service agents out under warranty to fix the faulty machine
ask why there was water in a new machine as that indicates not new but second hand

Danby DWM99W Top... | Answered on May 25, 2017

Is the circuit breaker for the wall plug tripped?

Danby Washing... | Answered on Dec 21, 2016

Not finding what you are looking for?
Danby Logo

205 questions posted

Ask a Question

Usually answered in minutes!

Top Danby Washing Machines Experts

peter gittos
peter gittos

Level 2 Expert

247 Answers


Level 3 Expert

85239 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Are you a Danby Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides