Daewoo Washing Machines - Recent Questions, Troubleshooting & Support


You can get in touch with RIYADH center for more details..

Dongbu Daewoo Electronics CORPORATION, RIYADH LIAISON OFFICE
Rayes B/D Office No.8 Olaya St. B/D No. 30 Riyadh, Kingdom of
Saudi Arabia
Tel : 96-61-461-5350/4542 Fax : 96-61-461-5356

http://www.dongbudaewooelec.com/english/cscenter_01.asp

Daewoo Washing... | Answered on Jun 10, 2020


It’s not working! I held down the start button for 3-5 seconds; and I tried the “time delay” button, I held it for 3-5 seconds and it’s still locked. I unplugged it, nothing worked!
6_9_2020_7_01_41_pm.jpg

Daewoo Washing... | Answered on Jun 09, 2020


An LE error code on the washer's display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.Apr 25, 2018

LE Error Code

Daewoo Washing... | Answered on Mar 19, 2020


ask google or Daewoo tech support

Daewoo Washing... | Answered on Mar 07, 2020


Waar kan ek motor herstel of koop vir Daewoo air injection 9020 teen n bekostigbare prys

Daewoo Washing... | Answered on Sep 01, 2019


Message = E2
Error = OVERFLOW ERROR
Cause & Solution =
The water is supplied continuously due to an defective inlet valve. Change the valve inlet.
The valve inlet is normal, but the water level sensor Change the water level sensor
(sensor pressure) is low. (sensor pressure).
The drain motor does not work - Test and if faulty change the drain pump


Message = E9
Error = SENSOR PRESSURE ERROR
Cause & Solution = The water level sensor is faulty. Change the water level sensor. (remove pressure tube and blow through it to make sure it is clear first)

Daewoo Washing... | Answered on Jun 13, 2019


remove it and check for anything that is jamming it if good u can make up a lead to test and see if it runs

Daewoo Washing... | Answered on Apr 22, 2019


there is an error no 9

Daewoo DW500M... | Answered on Apr 21, 2019


my Daedwoo DWF-806 MP machine when i swith on shows figure 49 and not figure 0, and it also making noise like Buzz in between when the machine is ON. Can anybody help me to resolve this defect
thanks

Daewoo Washing... | Answered on Apr 05, 2019


H3
Overheating dryer heater element detected. A fault has been detected with the dryer side heating.
  • Check fan motor is clear and unobstructed
  • Check wiring
  • Check dryer heating sensor

Daewoo Washing... | Answered on Jan 27, 2019

Not finding what you are looking for?
Daewoo Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Top Daewoo Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Fahr Quad

Level 3 Expert

774 Answers

Ngoro

Level 3 Expert

2623 Answers

Are you a Daewoo Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...