Cuisinart Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support


have someone replace the heating wires on the side that doesn't work

Cuisinart... • Answered Yesterday


You need to replace the transistor nearest the motor relay. It is a small transistor numbered 9013. Other transistors with the same number turn on and off other features of the unit such as heating. I got my transistors from fairchild semiconductor. Open the lid, unscrew the screw that holds the black plastic rim of the control panel, and then youll be able to pop off the control panel cover and see the two circuit boards, the one you want is the one without the lcd screen and large relays. Order your new transistors and replace.

Cuisinart... • Answered on Mar 04, 2021


Hmmm... I'm back again. My machine still smells terrible! I live in a relatively small, open plan apartment and this bread machine is smelling up the place. I am very unhappy with this because I am otherwise pleased with the bread it makes.

I removed the bottom plate to see what is causing the smell. I have NO doubt whatsoever that the problem is the rubber belt, which I believe controls the kneading paddle. I've taken to leaving it outside to air but am stumped for a permanent resolution.

Any remedies for stinky rubber that I've come across involve liquids, heat or powders etc.. just things in general that wouldn't be prudent near the electrical panel, as well as not wanting to take the risk of damaging the machine and having it stop working altogether.

I got it at Costco in January, no hope of returning it there. Has anyone contacted Cuisinart about this? I wonder if they are aware of the issue if it seems to be widespread. I am in Ontario.

What happened with the B&D? Did the problem ever resolve? Irony is that I had returned a smelly B&D in order to get the Cuisniart! Same problem, but IMO I think it was worse with the B&D and the Cuisinart is a better machine over all (if it didn't smell so bad!)

Cuisinart... • Answered on Jan 01, 2021


Hi...The paddle shaft fits tightly on a sealed bearing. This allows the shaft to spin freely. Over time the sealed bearing wears out, the shaft gets loose and liquid will leak through. Unfortunately there is no fix for this and a new bread pan is needed. sorry...Hank

Cuisinart... • Answered on Nov 20, 2020


The same thing happened to me yesterday. I made my first loaf and then I couldn't get the bread pan out. We kept pulling and yanking on the bread pan until it felt like it was going to break! This morning, my husband called Cuisinart. The man on the phone said he has the same machine at home, and that you just have to pull it really hard. He said don't worry, it won't break, just pull it. My husband pulled it again and it came out. I guess he just got the right angle on it.

It was definitely stuck from the bottom, not from the side clamp things. The man on the phone at Cuisinart said that after you use it more, it becomes easier to remove the bread pan. We put the bread pan in and then pulled it out a few times, and it seems like now it comes out easily, the way it should.

I felt obliged to respond here, because I was very discouraged after reading this thread last night. I was about to return the machine. I hope this solution helps.

By the way, my first loaf yesterday was the Rosemary Bread from the cookbook that comes with the machine. It was AMAZING.

Cuisinart... • Answered on Aug 29, 2020


We opened up our toaster and scraped some baked-on crumbs off the top of the electromagnet that controls the carriage catch. When we closed it back up, it worked again.

Cuisinart... • Answered on Jul 28, 2020


http://kitchen.manualsonline.com/mdownloads/a6885223-c815-4aec-9102-2ba06a5d7d1f.pdf

Cuisinart... • Answered on Mar 12, 2020


Most likey a burned out heating coil. You can buy them let me know the model number and I can give you a web site to go to buy it.

Cuisinart... • Answered on Aug 29, 2019


Are you reading the instructions correctly? No bread maker kneads for 1 hour and 30 mins.as you say. Normally the bread will knead, then sit for up to 20 mins, then continue mixing. then rising then a pause and the a small secondary knead, then rise again. Have you actually just put in the ingredients and left it to itself? If not. Put in the ingredients. Press settings and walk away. If the bread is done then you were perhaps a little too anxious. If it isn't then you know it needs servicing. Good luck.

Cuisinart... • Answered on Jul 11, 2019


one is to try to turn it upside down or to dismantle the whole bread maker

Cuisinart... • Answered on Jun 23, 2019


Even Replacement May Not Help for Long.
After my six month old CBK200 had the same stop and start malfunction I was sent a brand new replacement by the company. Three months later the new unit started doing the same thing. I am putting up with it for now, but as soon as I have a little more time, I will go back to the authorized repair depot and request another replacement and hope for the best.

Cuisinart... • Answered on Jun 17, 2019


We just bought a replacement Cuisinart popcorn maker after our 7 year old one died. Was surprised to see the note about not using olive oil in the manual since that's what we have always used. Apparently the concern is that olive smokes at a lower temp than other oils but it's always worked fine for us in the same model cuisinart. We like the richer flavor and health benefits -- we don't need to add butter when we use olive oil.

Cuisinart... • Answered on Apr 19, 2019

Not finding what you are looking for?
Cuisinart Logo

795 questions posted

Ask a Question

Usually answered in minutes!

Top Cuisinart Kitchen Appliances - Others Experts

Tom Chichester

Level 3 Expert

61759 Answers

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Harrie

Level 3 Expert

6746 Answers

Are you a Cuisinart Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...