Color Graphics Computers & Internet - Recent Questions, Troubleshooting & Support
I need to buy a Multiscreen Card Colorgraphic Predator Type LT 4PCI 612304
It is going to be hard to replace the exact graphics card due to its age. Your best bet is to replace it with another graphics card that is compatible with your motherboard. The good news is many cards should be compatible with your board since there are very few connection types available.
Post which motherboard you have or simply do a search for what type of graphics card type/connection it accepts. I believe it will be a PCI or PCI Express type card. To make it easiest on yourself make sure the new card you buy has the type of monitor cables you would like to use.
There are really only 3 types it could use and most likely it will use a VGA (blue smallish cable that only accepts pins) and/or DVI (White longer connection with a square and pins).
Hope that helps.
Driver
I don't understand what the problem is, send me a message and i'll help you.
Will this card work with
It has an ATI Radeon 9000 chip so yes, it will work. But without Aero - it doesn't supports Dx9, only Dx8.
Need drivers colorgraphics 612524 for xp
colorgraphics 612524God day. Download the file inside the link above and install it.
Run the program and it will provide you a compilation of drivers needed under colorgraphics manufacturer.
If you have any questions regarding the link above and/or on your problem, feel free to update this post.
Thank you and have a nice day.
Smps problem circle 600 watts
id say stick with the highest power supply you have, try replaceing the CMOS battery. also if your video card requires a PCIe power cable and there isnt one you may want to try that. this may be as simple as a bad 24x ATX power jack or the 4 pin on your mobo....which of coarse means Get a new mobo or have it fix with the warranty.
Other party cant hear me in Skype out
just make sure Zone alarm is not blocking that out going port, disbale zone alarm and try using skype. if ity works undo each port separately that it is blocking until you hit the riht one. Any changes to video and sound cards are automaticallk registered in ZA and blocked until told its OK
Only 1 of the 4
Hi,
In windows, you need to enable and extend your desktop into the extra outputs, you can do this in your display properties pages.
Card thinks there is 4 monitors when only 2 are hooked up
Is the dongle an active or passive device? It could also be that the card is set up in a mode that forces, rather than senses, the 4 monitor option (e.g., I think this device supports composite mode). Please provide info on this dongle, and whether this setup was working as in now broken (and then what did you change before it broke) or if this is something new altogether.
Not finding what you are looking for?