Casio Pathfinder - Answered Questions & Fixed Issues - Page 7


For all Casio watches go to www.casio.com select "Support" then "Manuals" then "Watches".
You will then be able to enter the 4 digit number in the square box to get the manual for your watch or module inside is actually what the instructions refer to.

The problem of changing functions automatically is called "Auto Display" and can be stopped and started in Sea-Pathfinder SPF-40 (modue 2273) by pressing the bottom left button for 3 seconds.

Casio... | Answered on Nov 28, 2008 | 659 views


The silver spring goes in a very small hole in the plastic casing on the bottom side of the watch located next to the wristband under the sensor. Hope this helps

Casio PRG-40T-7... | Answered on Sep 11, 2008 | 3,926 views


If you look very closely you will see that one side of the clip goes nearly under the battery. the plastic there has what looks like a small hole near the metal. It is in fact a slot. use a straight pin inserting it in the slot and gently moving the clip away from the battery. There is bend tension on the clip and it should raise slightly when released. Then use a tweezer grab the battery.

use your tweezer to hook the clip back over th plastic after you insert 4 new batteries.

Casio PRG-40T-7... | Answered on Dec 23, 2013 | 397 views


wait until the battery is full reloaded

Casio PRG-40T-7... | Answered on Aug 03, 2008 | 1,477 views


i had this problem with mine after a battery replacement. If you open your watch, and look behind the offending button, you'll notice there is a small arm that should fit behind the button. the jeweler that destroyed my O-ring during a battery replacement also failed to line these arms up on one side of the unit. i had to find a REALLY small screw driver and finagle the arm back under the button... Now it's working perfectly... except the whole not waterproof any more part....

Hope this helps.

Casio... | Answered on Jun 21, 2008 | 403 views


If you look at the GMT differential in the manual, you'll notice that it corresponds to the offset from GMT that your time zone resides in. I live in San Antonio but i don't see that on the list. I do know that when we're not in Daylight savings time, I'm -6.0 from GMT... so that's what i set it for. Also, if you're near enough to the coast to use this feature, it would probably be a good idea to compare the watch reading to the actual tides and adjust accordingly.

Hope this helps.

Casio... | Answered on Jun 21, 2008 | 2,508 views


Check the manual it should be covered there.

Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/

You will need a pdf reader on your pc, you will find all instructions in there.

If you don't have a pdf reader you can get one from
http://www.foxitsoftware.com/pdf/rd_intro.php

Casio PRG-40T-7... | Answered on Dec 03, 2010 | 5,057 views


Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/


You will need a pdf reader on your pc, you will find all instructions in there.

Casio... | Answered on Jun 09, 2008 | 2,199 views


"AC" means All Clear. This terminal should be marked somehow. Use a magnifying glass to get a good look at what you are working on. My Casio had an arrow pointing to four copper leads. I used a paper clip to connect the AC terminal (I just picked one of the four) to the + side (usually the "up" side) for a couple seconds and my Casio Sea Pathfinder model 2273 powered right up. See the following link for more guidance.
http://www.geocities.com/watch_crazy/battery/battery.htm

Casio... | Answered on Sep 24, 2008 | 8,185 views


The screen may be damaged. Or just faulty. If it had to go through too much shock, its trash.

Casio... | Answered on Feb 24, 2008 | 134 views


Your Watch is in Auto or demo mode. Hold down the "Mode" button for 3 - 5 seconds and it will return to time keeping mode.

Cheers,
Murray

Casio PRG-40T-7... | Answered on Oct 13, 2008 | 1,822 views


Call Casio Parts dept and they should be able to send you a band. 800-223-2001 is their number. :)

Casio... | Answered on Jul 23, 2007 | 508 views


Call the repairs center at 800-706-2534 and then keep choosing option 1. Tell them what's going on and that you would like to send it in for repairs. If they ask just lie and tell them you already talked to tech support. LOL

Casio PRG-40T-7... | Answered on Jul 08, 2007 | 326 views


Springs? No springs in a solar powered electronic watch. If there is anything wrong with it, return it to Casio for repair.

https://www.google.com/search?q=Casio+WVA-430TU+Wave+Ceptor

Casio Watches | Answered on May 02, 2020 | 54 views

Not finding what you are looking for?

-4,046 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Ekse

Level 3 Expert

13434 Answers

Bruce Robin

Level 2 Expert

300 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...