Choose a quiet, well-lit room where you can replace the battery in your Casio Pathfinder watch. Prepare a table, desk or other clean, flat surface where you can perform your watch repair. Put down a soft cloth or piece of craft felt to protect the face of your Casio Pathfinder watch from being scratched during the battery installation process.
Set your Casio Pathfinder watch face-down on the soft cloth or craft felt. Use an optical-sized Philips screwdriver to remove the four screws that secure the watch back to the body of the watch. Set the screws aside, but don't lift the watch back.
Slide the watch back off of the body of the watch very slowly. There are three important springs held underneath the watch back; it is essential to remove the watch back slowly to avoid losing them.
Lift the three springs out of your Casio Pathfinder watch using a small pair of metal tweezers. Take note of the length and placement of the springs as you remove them. Set the springs aside with the other disassembled watch components.
Take the black rubber protective disk out of your Casio Pathfinder to reveal an identically-shaped white plastic disk. Remove the white plastic disk and set it and the black rubber disk aside. Use your metal tweezers, if necessary, to lift out the rubber and plastic disks.
Release the battery strap that holds the battery in place in your Casio Pathfinder watch by pushing the battery strap latch to the left. Remove the old battery from your Casio Pathfinder using a pair of small plastic tweezers.
Pick up your replacement watch battery with the small plastic tweezers and insert it into the battery compartment of your Casio Pathfinder watch. Replace the battery strap and push it gently with the tip of your plastic tweezers to snap the latch in place.
Touch the "-" and "AC" terminals on your Casio Pathfinder watch with the tips of your metal tweezers for at least two seconds. This helps ensure that your watch will work properly once reassembled.
Put your Casio Pathfinder back together to complete the new battery installation. Start by replacing the white plastic disk, followed by the protective black rubber disk. Use your small metal tweezers to replace the small watch springs in their correct locations. Replace the back cover of your Casio Pathfinder, insert the four screws and tighten them with your optical-sized Philips screwdriver.
Casio Pathfinder... | Answered on May 24, 2012 | 1,952 views
Casio... | Answered on Aug 12, 2011 | 334 views
Casio... | Answered on Jul 02, 2011 | 301 views
Use this page to download a copy of CASIO watch manuals in PDF format.
To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.
Casio Pathfinder... | Answered on Jul 02, 2011 | 379 views
Casio... | Answered on Feb 15, 2013 | 189 views
Casio PRG-40T-7... | Answered on Dec 23, 2013 | 1,769 views
Casio... | Answered on May 02, 2011 | 111 views
Casio PRG-40T-7... | Answered on Mar 03, 2011 | 307 views
Casio Pathfinder... | Answered on Feb 09, 2011 | 345 views
Casio... | Answered on Feb 02, 2011 | 74 views
Casio PRG-40T-7... | Answered on Feb 23, 2011 | 762 views
Casio PRG-40T-7... | Answered on Jan 16, 2011 | 990 views
Casio Sea... | Answered on Jan 07, 2011 | 453 views
Casio... | Answered on Jan 06, 2011 | 213 views
Casio PRG-40T-7... | Answered on Nov 10, 2010 | 194 views
Casio... | Answered on Mar 29, 2011 | 840 views
-4,044 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: