Casio Computers & Internet - Page 7 - Recent Questions, Troubleshooting & Support

Try manualsonline.com

You did not state the problem you are having, but the manual can be downloaded here... http://www.manualslib.com/manual/358037/Casio-Ctk-731.html

Download it online for free

you mean keyboard tutorials or what?

Dear Lorraine, I searched a lot, but I could not locate a Casio PCR-1280 or PCR-1289 anywhere. The closest model that resembles that was the PCR-T280. Its manual can be downloaded from the link below. http://www.casio4business.com/sa/products/downloads/manuals/PCRT280_English.pdf Hope you may find this information helpful! Regards, Miguel L. Martins

u can try whatsap

Any repair cost outside a warranty period is the owner's responsibility. Most printers and scanner, in fact just about everything to do with computers,are not built for repair but replacement. The cost associated with repairing computer devices and peripherals makes the task impractical. Get a free quote first but I would confidently say the answer would be "Not worth repairing. Buy a new one"

See this...

I was successful installing a Casio Privia PX-575R USB midi keyboard to Windows 7 Ultimate x64!!!
I tried to use Yamaha, Korg, M-Audio, and some other drivers I don't remember and
they did not work.

I then downloaded the win 7 x64 driver for PC-50 from
http://www.roland.com/products/en/_support/dld.cfm?PRODUCT=PC-50&iRcId=16224976&dsp=1
(but I bet any of them would work) from Roland. All I did was change the hardware ID
in the INF file under

[Roland.NTamd64.6.1]
;; Windows7
%RDID0053DeviceDesc%=RDID0053Install, USB\VID_07CF&PID_6802

The ID is after the comma and the one you see above is from the Casio keyboard i have. The
hardware ID for your keyboard can be found in "device manager". Just choose your
hardware/keyboard and go to "details" and choose "hardware id" from the drop down
menu and put that after the comma. It will start with "USB" since it is a usb
devise. There may be more than one ID but the first one works for me. Then just do
a manual install by right clicking "computer" or "my computer" and click "device
manager" tab. Then find your keyboard (probably a yellow exclamation mark next to
it) and double click it. Then go to the "driver" tab and click "update driver".
Then choose "Browse my Computer for driver software", then "Let me pick from a list
of device drivers on my computer", then "Have Disk..." and browse for the INF file
you just put the hardware ID in and click "open".

You now have a working Casio keyboard for a 64 bit or x64 windows 7 operating system.
You can do the same with Vista x64 or XP x64, just download those drivers and edit the hardware ID the same way.

Thanks

Hi try pop up to any mobile repair shop and ask them if they can fix it for you.

If it is part of the plug side that goes into the wall then it is not worth fixing. You can replace this pretty easy. On the front or back it will tell you what the input and output voltage are as well as the amperage. It will be 120v input and most likely a 12v output. Could be less like a 9 or 6 but that is the number you need to match. You will also need to match the amperage as well. It will most likely be in the milliamps. There are many universal adaptors that would work for you available at Walmart, Target, Best Buy etc....

http://www.casio4business.com/sa/products/downloads/manuals/PCR262_E041206B.pdf Page 40. Call the 800 number.

Well I have no knowledge of your cash register, but have lot of experience with other brands.... usually is caused of wrong set up of communication port.... I assume you have computer, with program that allow you to send plu's to register.... and there will be something like options, or set up or something like that.... there you need to choose same port as you have register connected to......and usually set same communication speed, as register have set up.... SOme registers will not let regular users to do any changes, and you unfortunately need to let some authorised service do that....

take it into the closest watch store. dont try to fix it yourself you will only make it worse

I service many computerized cash registers, though none of my customers have Casios. Everything else Casio makes is great though, so I have no doubt this is a great machine. Here's a PDF of the manual for your specific unit and a possible solution that works for me across many different platforms and brands: http://www.casio4business.com/sa/products/downloads/manuals/PCRT500_INC-e.pdf On page 18 of this manual, there is a list of all the main buttons. Every machine I've seen has had button like number 2 on that page (to print a final receipt). What all of the employees of my customers do to print out two or more receipts is just hit this button again after it prints out the first one and that works like a charm. I hope it'll work for you. I also saw many cool options you could set so that it would print out different kinds of receipts, such as sale reports with specific information on them. It might be worth looking into as there may be another way that works even better for you. I wish you the best of luck! :)

Computer rejects your efforts to install?

you have the cd/dvd with programme for the right printer, most common issues is people plug in usb-Cable BEFORE they install the programme, so start cd/dvd first and follow on screen messages.