Canon dc - Recent Questions, Troubleshooting & Support - Page 8
Canon dc230 is not recognised
Did you put the camcorder in playback mode before plug in?
If yes and still same check on a different pc.If still same than it is a camcorder issue
If on a different pc all is ok then reinstall the drivers on your mac
I would like to transfer
Hi, the Videos can be imported directly by connecting the Camcorder to the USB port of the Computer.
Windows 7 directly imports the Video from the Camcorder, if the Camcorder is not detected in the computer then it requires Drivers which will be available from the Camcorder manufacturer website.
The imported Videos can be edited with Windows Movie Maker application which is pre-installed with Windows 7.
You can also try these top 5 free Video Editors mentioned in the below link:
http://www.desktop-video-guide.com/top-5-free-video-editing-software-review.html
I have finalized many discs
Hi!
to begin with, some important information:
- You'll need to format the DVD before you record on it. This feature
will be in the setup menu.
- Use only DVDs recommended by Canon as any
others may not be able to be finalized once you're done recording.
- Finalizing is what you need to do in order to prepare the DVD to be
played in a DVD player. To Finalize, you'll
need to hook it up to it's AC adapter and select finalize from the menu.
- You cannot finalize a disc (DVD-R/DVD-R DL or DVD-RW) recorded in VIDEO mode if it contains only still images. Record at least one scene before finalizing the disc.
- The camcorder can't perform finalization if it's exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use.
Anyways, I've found this... Maybe it can help you:
1) Use
IsoBuster to mate a .toa file of the selected track (the burned part of your DVD).
2) Open the .toa file in
WinHex. Select: Tools > Disc
Tools > File Recovery By Type > Select the two mpeg file options
> set max. file size and click ok.
Use a DVD authorizing software (such as
DVDStyler) to burn the MPEG video file in a DVD structure.
In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.
Good luck & best regards,
Pelu.
My computer does not recognise
Hi,
Please check both of your CD type and CD writer. You may have CD rom with DVD disc cause your computer is unable read the this. If everything is OK, you may have optical lens problem on computer. Please clean the lens with lens cleaner. If problem persist, replace your lens with new one.
Regards, Jay
Can't finalize disk or download to computer
i had the same problem. the clarification request above from Rob (robmcd27) lead me plug in the AC power adapter which made the finalize option available. now the disk is readable in my DVD drive.
My camcorder will not give
Hi,
Are you using the AC adapter when trying to finalize? You cannot finalize using battery power only.
Link to your manual:
Canon DC210 Manual
(What format discs are you using?)
Instructions for finalizing begin on page 61.
Hope this helps.
Thanks for using Fixya.
My video camera is not
Hi,
Yes, you need to get a new charger. Charger needs to be orange when it is charging.
Shane
I have a Canon DC220
Hi!
Basically, after finalizing the disc, the video(s) could be played in any DVD player, including your DVD drive in your computer (the disc sits in the internal "circle" within the DVD drive's tray).
For more information, take a look at chapter "Playing Back the Disc on an External Device" (pg. 75-76) of the
User's Guide.
To download the contents to your Mac,
simply copy the files from the DVD to the hard drive.
If you're using
iMovie '08, you might want to read
this...
The procedure for
iMovie, as written in a thread I found, is:
- Finalize the DVD before hooking up to USB
- Launch iMovie before hooking up USB
- Once iMovie is up, connect the camera to the Mac via the "PC CONNECT" function on the camera.
- Wait a much longer time than you think it should take and then wait some more.
In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.
Good luck & best regards,
Pelu.
How do you finalize disc
To finalize the disk:
Select MENU --> then select: DISC OPERATIONS
then select: FINALIZE
then select: YES ... to go back to MENU
During the disk finalization, a progress bar is displayed. Close the MENU only AFTER the screen display returns to the DISC OPERATIONS menu
Does it really need to
NO - the camera should have a battery life for at least 2-3hrs for video taking and playback.
It does need to be in it's base to recharge properly , maybe the battery is low and , but , once charged fully you should be able to turn on/off many times.
Try letting the batteries run down very low - and then leave them charging for 7-10 hours. -- Ray
Cannot transfer my videos to
Do you have a SOFTWARE CD-ROM installer on your CANON DC230 DVD Camcorder? If you have just try to install to your PC.
My dvd canon dc 210 camcorder will not charge when
Hi,
I Hope the steps below should be helpful in fixing your camera issue.
Fixing a Lens Error on a Digital Camera
This has to be THE most common failure mode for a digital camera. Some
common error messages that might show up on the LCD's of cameras with
this problem include "E18 lens error", or "lens error, restart camera".
Some cameras might show nothing at all, but merely make a beeping noise
as the lens goes out, then in, then the camera shuts off. Sometimes the
lens won't even move.
The problem is actually quite common throughout all camera brands.
Usually it's sand or grit interfering with the lens extension mechanism.
Or the camera's been dropped with the lens extended. Or the camera has
been powered on, but the lens had been blocked preventing its extension.
Or the battery ran down with the lens extended. Believe it or not, one
BIG contributor to lens errors is using a camera case. Sand, gunk, case
fibers, etc... accumulate at the bottom of the case. These materials
love to cling to the camera by electrostatic build-up from the camera
rubbing against the side of the case (especially those cases with soft
fibrous intreriors). Once these materials work their way into the lens
mechanism, that's all she wrote. I have many Canon's, and NEVER use a
case for this very reason.
A camera owner that suffers this problem may have no recourse for having
the camera repaired. Many camera makers will not honor repairing this
problem under warranty as they claim it is due to impact damage to the
camera, or sand or debris getting into the lens gearing mechanism
(neither of which is covered under warranty). The quoted repair cost is
usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily
be fixed by one of the following methods. None of these methods involve
opening the camera, although some have potential to cause other damage
to the camera if excessively done. If the camera is still under
warranty, before trying any of these, please please first contact your
camera's maker to see if they'll cover the repair, or to determine how
much they'll charge for the repair. Who knows, you might get lucky. But
if they quote you a number that's higher than the value of your camera,
you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera.
Thus make sure you try them in the listed order. And remember, these
fixes (especially #6 and 7) should only be considered for a camera
that's out of warranty, who's cost of repair would be excessive, and
would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes.
Put a fresh set of batteries back in (preferably rechargeable NiMH
2500mah or better) and turn the camera on. If that didn't work, try
pressing and holding the Function or OK button while turning the camera
on.
Fix #2: Remove the batteries, then remove the memory card. Then
install new batteries, and turn on the camera. If you get an Error E30,
it means you don't have a memory card installed, so turn it off, slip in
the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the
camera on. Inserting this cable ensures that the camera's LCD screen
remains off during the start process. Thus extra battery power is
available to the camera's lens motor during startup. This extra power
can be useful in overcoming grit or sand particals that may be jamming
the lens. If the AV cable doesn't fix the lens error by itself, consider
keeping this cable installed while trying fixes 4, 5, and 7 as a means
to provide extra help to these fixes. But note that I DON'T recommend
keeping the cable installed during Fix 6 as you may damage the AV port
while tapping the camera. Reinsert the cable only AFTER tapping the
camera.
Fix #4: Place the camera flat on its back on a table, pointed at
the ceiling. Press and hold the shutter button down, and at the same
time press the power-on button. The idea is that the camera will try to
autofocus while the lens is extending, hopefully seating the lens barrel
guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels
with the idea of blowing out any sand or grit that may be in there
jamming the lens. Other variations include blowing with a hair dryer in
"no heat" setting, or sucking the gaps with a vacuum (careful with this
one).
Now we're entering into the realm of potentially damaging your
camera in conducting the fix. There is definitely some risk here, so
take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard
surface with the intent of dislodging any particles that may be jamming
the lens. Other variations include hitting a side of the camera against
the palm of your hand. A lot of people have reported success with this
method. HOWEVER, there is also some potential for damaging or dislodging
internal components with this method, such as unseating ribbon cables,
or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success
with this method than with any of the other methods. HOWEVER, there's
obviously some potential for damaging your camera by using this method.
Variations include gently pulling, rotating, and/or twisting the lens
barrel while hitting the power button. Attempt to gently straighten or
align the barrel if it's crooked or twisted. Another variation includes
looking for uneven gaps around the lens barrel, and then pushing on the
side of the lens barrel that has the largest gap (note pushing the lens
barrel all the way in is NOT recommended as it may become stuck there).
While doing any of the above, listen for a click that indicates that the
lens barrel guide pins may have reseated in their guide slots. If you
hear this click, immediately stop and try the camera.
Regards,
Shawn
* Please rate this solution with Thumbs up and Testimony to help us improve providing support
Not finding what you are looking for?