Cannon Office Equipment & Supplies - Answered Questions & Fixed Issues
My feeder does not work. It is a Cannon Imagerunner 330S. Serial plate XSC24741.Can this part be purchased?
The Cannon Imagerunner 330S has been discontinued for over 20 years, so it may be difficult to find a replacement feeder for it. I recommend contacting Canon's customer support to see if they have any parts or suggestions for repairing the feeder. You can also try checking with local repair shops to see if they have any compatible parts available. Contact information for Canon's customer support can be found on their website.
Cannon Oce 650 error code 16502/printer on start up. How to fix?
Check to make sure there isn't something blocking the paper output on the back of the computer. If not, open up the front door, about the top drawer, and close it. Go the back and open up the rear cover and close it. That may reset the problem. Remove ALL jobs from the queue and clear the set memory.
If that doesn't fix it, there may be a problem with the output sensor. These sensors may not be easily available on any website, so it's best to call you local Oce/Canon dealer for service.
Error Code: E197 0000 in cannon 2900 printer
Printer engine communication error
Erroneous communication between the DC controller PCB and image processor PCB was detected.
- Check the connectors of the DC controller PCB and image processor PCB.
Replace the DC controller PCB for normal connection. - Replace the image processor PCB.
E197 0000 Laser Driver PCB communication error
Description :
Description Error in communication with the Laser Driver PCB (communication data failure)
Causes :
Laser Driver PCB communication error
Solutions :
Remedy
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
12/1/2021 6:06:52 PM •
Cannon Office...
•
Answered
on Dec 01, 2021
•
4,883 views
My Cannon pixma 280 printer wont print it says error 5B00
What can I do?
The reason behind the canon printer error 5b00 is when the system continuously fills the ink tank and the printer stops to absorb that and hence we come to face this error.
Here are few steps which will help you in fixing
canon printer error 5b00:
1.Reset The Waste Ink System Count First: the first method to solve this error is to reset the waste ink. By applying this method you can get out of the error which is troubling you.
2. Manually clean the Waste Ink Foam: to clean the waste foam you have to open the front cover of the printer. Now you have to remove the cartridges one by one and then clean the rollers. Now check whether your error is gone or not.
So, these are the steps to solve the error. If you found the error is still there, then you have to visit an expert.
6/15/2021 7:05:18 AM •
Cannon Office...
•
Answered
on Jun 15, 2021
•
1,016 views
Not finding what you are looking for?
