Cakewalk Music - Recent Questions, Troubleshooting & Support
I installed my new Roland
You may have to coax it back by unplugging or even trying a different connector on the computer. It may have disabled the port due to a current spike. Using the devoce manager in the windows control panel, see if the port has been disabled. If necessary delete the device and tell it to seearch for new hardware.
Cakewalk v20. lost connection to
Check that in the control panel of Windows, "Sounds and devices" your interface is the default device in each of the panels under the tabs such as "Voice" and the others.
Hi Guy's, just
Read through the guideline, n u will be clear by ur self!
3/26/2011 10:00:38 PM •
Cakewalk...
•
Answered
on Mar 26, 2011
Hello,
I have owned a Roland
Kill all spyware and anti-virus programs and internet connections and wireless WHILE doing audio work. ALL these resource HOGS **** time from your processor and cause overuns of the buffers in your audio interface.
Do a control-alt-del to bring up the Windows task manager and look at what processes are running and sucking processing time. Even things that check for updates sit there and periodically grab processing power.
When burning CD's the same goes as well... during burns, the processor needs to be purged of these interrupting resource hogs.
In the last three weeks I have been continuously hit with updates from Adobe, MS, and Sun (Java) that interrupt and **** time, often at the most inappropriate times. These continous scanners for updates MAY be what are hitting you. Do any updates and then kill and disallow updates while doing your audio work.
2/25/2011 5:08:37 PM •
Cakewalk...
•
Answered
on Feb 25, 2011
Goodmorning,
I'll try to explain the
You have to make sure that the clockspeed of the program that you use to play the files back with matches the clockspeed of the program that created them. I might be wrong about that. Here is a good resource:http://forum.recordingreview.com/f18/midi-troubleshooting-101-a-5208/ You will have to join to access but its free and the Killer Home Recording setting up is also free from the site and is full of good info.
When I connect my guitar
Open the "sounds and devices properties" in the PC control panel and make sure the input and output show that the V studio IS the input and output... If not, select those. Often you will find that they have defaulted to the PC internal audio board.
12/9/2010 2:34:12 PM •
Cakewalk...
•
Answered
on Dec 09, 2010
Peavey cs1000 x
The most likely case is that one of the main output transistors (if which there are many) is shorted. When the protect circuit senses DC on the final output, it will not allow the output relay to come on to protect the speakers from raw DC. With the power removed, you can check between each outputs Emitter and Collector and you will probably find close to zero ohms. From that point you need to unsolder each of the pins of the bad channel until you find the shorted device(s) and replace them.
2/7/2024 9:32:20 AM •
Music
•
Answered
on Feb 07, 2024
No or very little sound from Fender passport
Depending on the model, there are four around that date, it could be the insert jacks are tarnished reducing the signal flow between the pre amp stage and digital power amplifier. It could be the power amplifier has failed. It could even be customer error in wiring.
This assumes there is the correct level of signal entering the input sockets of course.
12/31/2023 8:25:12 AM •
Music
•
Answered
on Dec 31, 2023
Breaking Roland RD 600 hammers
The Roland RD-600 is a digital piano, and its hammer action mechanism is designed to simulate the feel of an acoustic piano. The hammers in digital pianos like the RD-600 are typically made of materials like plastic or a combination of materials to replicate the weighted feel of acoustic piano keys.
The breaking of hammers in a digital piano is not a common issue, and it's not typically related to the age of the instrument alone. Several factors could contribute to the breakage of hammers, and it's essential to consider the following possibilities:
- Excessive Force: If the keys are played with excessive force or if there's any physical damage to the instrument, it could lead to the breakage of hammers.
- Material Quality: The quality of materials used in the construction of the hammers can impact their durability. If the hammers are made from subpar materials, they may be more prone to breaking.
- Manufacturing Defects: In some cases, there could be manufacturing defects that make the hammers more susceptible to breakage.
- Maintenance: Lack of proper maintenance, such as cleaning and regular inspection, may contribute to the wear and tear of components, including hammers.
If you've observed a pattern of hammers breaking with regularity, it might be worth investigating the specific cause. If it's due to excessive force or physical damage, adjusting playing habits and taking care during transport can help mitigate the issue.
As for whether it's worth purchasing new hammers from Roland, it depends on the extent of the damage and the overall condition of the instrument. If the RD-600 is in good condition otherwise and you enjoy playing it, replacing the hammers could be a reasonable option. However, you may want to assess the cost of replacement hammers compared to the overall value of the instrument, factoring in the cost of a used RD-600 and any potential future maintenance needs.
11/12/2023 2:54:05 PM •
Music
•
Answered
on Nov 12, 2023
Not finding what you are looking for?