Bushnell Measuring Tools & Sensors - Page 4 - Recent Questions, Troubleshooting & Support
Acr 2000 ac machine will not leave initializing
You can try the following: 1# Check the main power cable & make sure it has 110V (Do not run the machine with long extension cable).2# Check all harness connection.3# Check keyboard cable connection on back of control board.4# If all the cable connection is good then you may need to replace the control board.
How can i get the weather station to communicate with the display center
If it is like mine, the CR2032 battery in the base station only lasts about 6 months, whereas the one in the outdoor unit lasts over a year. Try this though. Remove the batteries from both units. Replace the battery in the indoor unit and then in the outdoor unit. It should re-register it.
I am looking for the operation instructions for the Max-Cal 950-201
Fowler Max Cal?
not a computer so moved you to tools
it is a
digital hand Caliper tpol. . sold on ebay from china
there are 2 choices, ask your sell for the manual .
or google for it.
the sales sheet shows this, (google hits)
www.fvfowler.com •
[email protected]
it is toy grade, if needs calibration is 3 times cost of new tool $25
it is imported from china, dirt cheap and sold 2 times that. aprox.
but the only hope is endless googling for manuals.
Owner manual for Ultronic weather clock
Press the "Down" button to toggle between Celsius and Fahrenheit.
Press the "Up" button to turn the alarm on and off.
For complete instructions on the Ultronic clock thermometer, see:
https://pdfslide.net/documents/ultronic-clock-cl-266instructions.html
Not finding what you are looking for?
