Bushnell Cameras - Page 2 - Recent Questions, Troubleshooting & Support
I just bought a Tasco Digital Trail Camera -
I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!
How do i know if my bushnell 119438 Nature View Hybrid Trail Camera is faulty?
Why do you think it has a problem? Your video appears to be working. It is bright, due to IR reflection, but the animals can be seen and the picture seems to be in focus.
Have you checked the user manual instructions for setting it up correctly? From the manual recommendations, the camera in this instance may be set too close (page 27). If you need a copy of the manual, you can download it from here: http://www.manualslib.com/download/717012/Bushnell-119438.html
How do I change the password
1. Turn camera on and wait for the password screen.
2. Press and hold the enter button until the camera switches to the 5 digit password mode. "Trail sentury cams will not indicate a 5 digit mode on the screen, but it will show "-----".
3.Press enter to confirm 5 digit mode.
4. Enter the 5 digit code "66214, then press enter. *Note it will accept a 5th digit.*
5.Camera should display "PASS" and go into the operating mode.
From here you can program a new password from the setup mode.
Is there a factory reset
Normally you have to send it in to Bushnell and have them do it for a fee but in the past I used the following to reset a similar Bushnell trail cam and it may work for you:
1. Turn camera on and wait for the password screen.
2. Press and hold the enter button until the camera switches to the 5 digit password mode. "Trail Sentry cams will not indicate a 5 digit mode on the screen, but it will show "-----".
3.Press enter to confirm 5 digit mode.
4. Enter the 5 digit code "66214, then press enter. *Note it will accept a 5th digit.*
5.Camera should display "PASS" and go into the operating mode.
From here you can program a new password from the setup mode.
How to i get my windows xp to read sd card from bushnell trail camera
In general, connecting a digital camera to a computer is not the best way to work - and not the quickest. It is considered better practice to use an inexpensive Card Reader that you put your card into and that is connected to the computer via a USB lead - the lead must be a DATA lead - many used for charging are not suitable. Sorry cannot offer more help but your query is a bit vague.
Password reset
If 0000 doesn't work then you have
to send it back to Bushnell
to reset the password. It should not take long to get it back according to others with the same problem, just to let
you know...
Benjamin
Bushnell Trail Sentry Camera- forgot password
Trail Scout and Trail Sentry camera re-programming procedure.
1) Turn unit on and wait for screen to prompt password
2) Press the enter button and hold until camera switches into 5-digit password mode _ _ _ _ _.
Trail sentry cameras will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .
3) Press enter to confirm 5 digit mode (for trail scouts go to next procedure).
4) Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th 0ne is entered in the _ _ _ _ screen.
5) Camera will now go into operating mode, and user can now program a new password from the setup mode
Not finding what you are looking for?