Bulova Accutron - Recent Questions, Troubleshooting & Support - Page 6

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0ahUKEwjv1a3F2qXVAhXHdD4KHc_0BlcQFggzMAI&url=http%3A%2F%2Fshowmeymoney019.pixnet.net%2Fblog%2Fcategory%2Flist%2F0%2F1%2F&usg=AFQjCNFA6BdM-faTWevn8sXXO8h5JGqF_w

fixya doesnt do appraisals --bring to a jeweler or watch maker or even a pawn shop appraisal are a hands on and visual concept

This is a 1967 watch. The battery was a 329. http://www.mybulova.com/forums/accutron-spaceview-1967 The 329 may come in two sizes,one is high drain, the other low drain. That means there is a question of fit. However, Bulova documentqtion indicates that the places that sell Bulova watches can supply batteries. You might check the Bulova website for a retailer near you and give that a go. Alternatively, below is a link to 329 batteries. https://www.amazon.com/Renata-329-Button-watch-battery/dp/B001C17ZZY Parts Manuals https://www.batterybob.com/products/32-accucell-1-343-diy-replacement-kit/

You can buy one. Follow link. http://www.allamericanwatches.com/product/BAND-98R107

14663649

81results for bulova watch band links Please contact our parts department at [email protected] or call 800-233-3350

they cost about $60. they are cheaply made throw away dress watches. you didn't get ripped off. you just wasted your money on cheap chineese garbage, you are not alone. wear the watch, throw it away when it stops or you don't like it anymore.

I have the exact same issue with the minute hand resting at the 1 minute mark and now I have condensation under the glass. The watch is only 2 months old so I think I will return it.

cant see that model watch on the Bulova web site user manualshttp://www.manualslib.com/brand/bulova/watch.htmlif unsure if it needs a battery go to a jeweler or watch or battery seller some model Bulova Watched instructionsIF YOUR NEW WATCH IS A MECHANICAL WATCH(no battery)Mechanical watches differ from Quartz watches in severalrespects:1. No battery changes are needed - they are powered by a main-spring, which is wound either by wrist movement; or in somemodels by daily winding of the setting crown.2. Because it is a mechanical device, it's accuracy is subject tothe effects of gravity and temperature. You can expect, on theaverage, a daily variance of up to 10 to 20 seconds formechanical watches.3. Just like automobiles, these watches require routine mainte-nance. Due to their mechanical complexity, mechanicalwatches require cleaning and new lubrication every 3 to 5years to run at optimum efficiency.FOR THE AUTOMATIC SELF-WINDINGMECHANICAL WATCHit must be wound at least six or seven times before you wear it.After that, your daily activity should wind the watch sufficientlyto keep it running at night when it is not being worn. If yournormal daily activity is not sufficient, occasional supplementarymanual winding may be necessary. It is suggested that yourmechanical watch be cleaned and oiled periodically to insureoptimum performance. As a mechanical watch, quartz watchaccuracy cannot be expected. References to the power cell donot apply to Automatic watches

The back of the watch is popped off with a special tool.

It is possible a tiny gasket is inside the tread... needing to be REPLACED before proceeding. First check to see if it is a "left-hand" or "right-hand" threaded CROWN... Then check that there is no damage to the STEM or the CROWN... You will need at least a 10x (power) jeweler's loupe to see that. If you have any damage... A watchmaker might be able to dress the treads and save the ORIGINAL PARTS... Else you are probably looking at replacing both the stem & crown...

Thank you for contacting FixYa.
You can find Bulova instructions here:
http://www.bulovaspecialmarkets.com/service/servicecenter.aspx
Jewel