Watches - Page 2 - Recent Questions, Troubleshooting & Support


You could take the watch to a jewelry store and to some that repairs and fixes watches to get a new battery.

Invicta Watches | Answered on May 14, 2020


You could take it to someone that fixes and repairs watches and jewelry to have a look at it and to repair it.

Ebel Watches | Answered on May 14, 2020


https://www.youtube.com/watch?v=Hj1lKEULXAI

Watches | Answered on May 13, 2020


Google doesn't know what you mean either. You have a Facebook Sports watch? Never heard of one.

https://www.google.com/search?client=piriform&q=Facebook+sports+out+of+military+time

Military Time... | Answered on May 13, 2020


Jewelers in a shopping mall often replace batteries cheaply, if there is one open near you.

There are also mail in services to replace watch batteries that can be identified using an internet search such as https://www.google.com

If you have the ability to open the watch without breaking it, you should be able to remove the battery and identify it yourself, and can buy it in a store or online.

Diesel Watches | Answered on May 12, 2020


ASK THE MANUFACTURER WE DO NOT HAVE ANY

The Watches | Answered on May 10, 2020


Press "mode" until the hour is flashing,
Now press "start" to change the hour. When hour is correct, press "reset" and minutes should start flashing.
Press "start" to change minutes" then press "mode" again.

Watches | Answered on May 09, 2020


BATTERY INSTALLATION
In the stopwatch, two types of batteries are used -- 4 pieces of 1.5V AA size alkaline battery and 1 piece of CR2032 Lithium battery

The Watches | Answered on May 07, 2020


I changed the two batteries, and now the watch won't work!

Fossil Watches | Answered on May 05, 2020


move the plastic button at the back slightly to the right side where it says "Time" and than adjust the time by pressing 'Mode' and 'Up/Countdown' buttons

Watches | Answered on May 02, 2020


Springs? No springs in a solar powered electronic watch. If there is anything wrong with it, return it to Casio for repair.

https://www.google.com/search?q=Casio+WVA-430TU+Wave+Ceptor

Casio Watches | Answered on May 02, 2020


we will send the army over for you

Watches | Answered on May 01, 2020


https://www.youtube.com/watch?v=RzQcj1ulIkQ

"Five hundred dollars for a '93 Rolex Daytona," he says, "I'll do it!" That same watch is valued at around $16,000-$19,000 now, depending on its condition.Jul 30, 2012 https://www.exquisitejewelersmiami.com/blogs/rolex-daytona-watches/6351872-the-rolex-daytona
Rolex Daytona Size and WeightDaytona watches are large and typically measure 40mm across. Weight for the Rolex Daytona varies based on the material used. For instance, it ranges from 148 grams for the stainless steel model, to 195 grams for the white gold, to 283 grams for a platinum Rolex Daytona.
https://northscottsdaleloan.com/watch-reviews/rolex-daytona/


Rolex Watches | Answered on Apr 29, 2020


It is possible that either that the movement of the watch is not aligned properly after a battery replacement.

Timex T5K018... | Answered on Apr 29, 2020


For some reason you cannot find the manuals on the Bulova web site any longer. But don't worry....
I have the manual for the Bulova Marine Star 96C30 Watch. This is easily fixable.
Below, I have typed the instruction on how to fix this issue as well as reset the time and calendar and a few extra tips in case you forgot....

Here is what it says to do if the hands don't match up with the display time (usually happens after you change the battery).
First, you must locate the buttons on the watch.
The "A" button is at the 2 o'clock position (upper right). The "B" button is at the 10 o'clock position (upper left) The "C" button is at the 8 o'clock position (lower left) The "M" (mode) button is at the 4 o'clock position (lower right), and is the only button you can pull out to set the times, calendar and programming.
To RESET the watch and do the ZERO POSITIONING after changing a battery or having a display error, do the following.
RESET 1. Pull the "M" button out to the setting position. 2. hold down the "A", "B", and "C" buttons simultaneously for 3 seconds, then release them. All digit segments will turn on and display completely.
ZERO POSITIONING 1. Press the "B" button and all the segments in the digital time will reset to zero, with "UTC" showing in the main digital window. 2. Zero the "UTC" minute and hour hand (located in 12 o'clock sub-dial) to the 24 o'clock maker (straight up). Button "A" will move the hands clockwise, and button "C" will move the hands counter clockwise. 3. Press button "B" - "HR" shows in the main digital window. Adjust the main (large) hour hand to the 12 o'clock (midnight) position using "A" and "C" buttons. At the same time, observe the synchronized 24 hour hand (small dial to the left of the main dial), to insure that it also moves to point to "24". 4. Press button "B". "MIN" shows in the display window. Adjust the large minute hand to also point to the 12 using the "A" and "C" buttons. 5. Push the "M" (mode) button back in to its normal position. The watch beeps and at the same time the hands jump slightly. ALL RESET and ZERO POSITIONING are now complete. 6. Reset the time, calendar and other modes.
To set the time. Note that changing the time in any of the cities will automatically update the time for all the cities. 1. Press the "M" button to move the mode hand to (TME) 2. Press either the "A" or "C" button to move to the desired city. 3. Pull the "M" button out to the setting position. 4. Press the "A" button. SECONDS will blink. Set them with "C". 5. Press the "A" button again, and MINUTES will blink. Set them with the "C" button. 6. Press the "A" button again, and HOURS will blink. Set with the "C" button. 7. Press the "A" button again, and 12 or 24 hours tim format will appear. 8. Push in the "M" button to its normal position.
To set the calender 1. push the "M" button to move the mode hand to (CAL) 2. Set the city using the "A" or "C" buttons. 3. Pull out the "M" button to the "setting" position. The numbers of the "month" starts to blink. this is an "american" date system with the month first, day second, and year third. Use "C" button to adjust the month. 4. Push the "A" button. The date (day) will flash. Adjust with the "C" button. 5. Push the "A" button. The YEAR flashes. Adjust with the "C" button. 6. Push the "M" button back in. The calender is simultaneously adjusted for all cities.
Couple of other "tips".
Switching the time on the digital display with the time shown on the hands: 1. Press the "M" button until the mode hand is in (TME) or (CAL) mode. 2. Pressing the "A" and "C" button together. The time will switch the between the main hands (analog) and the digital display.
Temporary Hand Retraction Pressing and holding the "B" button will move the hands out of the way of the display. Repressing the "B" button will put the hands back at the correct time.
hope this helps.

Bulova Marine... | Answered on Apr 29, 2020


well looks like need.... again.
How do I change a wick in a zenith lighter -

Zenith Watches | Answered on Apr 29, 2020

Not finding what you are looking for?
Watches Logo

59,383 questions posted

Ask a Question

Usually answered in minutes!

Top Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76352 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...