Washing Machines - Page 8 - Popular Questions, Answers, Tips & Manuals
Tecno washing machine error code e3
E3 means you have an error with your motor itself.
That means that it doesn't detect that your drum is moving smoothly.
Unlock the door, and spin the drum by hand to see if it spins normally. If it does, you either have a bad control board or a bad motor.
Drain pipe clogged in samsung sr606-ev - how to clean it/ unclogged?
Is this the flexible pipe coming out of the back of the machine or the pipe work inside the machine? The flexible pipe (usually grey in colour) is a 'push on' fit. You'll need to get in behind the machine. With a bit of wiggling and twisting the pipe should pull off at the machine end. You should then be able to get the whole thing out from behind the machine to clean it. I used an long, old piece of wood dowel to loosen the dirt. I then carefully flushed it through using a garden hose with the nozzle set to jet, not to the wide spray pattern. I know this because I got very wet making that mistake.
My ELEKTA EAWM 1100 has E3, all the line and the drain motor are ok, what is its problem, please help
According to my search results, the E3 error code on your machine indicates a problem with the drainage system. Since you mentioned that the line and the drain motor are okay, there might be a blockage in the drain hose or the pump filter. You can try to remove the drain hose and check if it is clear. If it is not, you can try to clear the blockage by blowing air through it. If the drain hose is clear, the problem might be with the washing machine pump. In this case, you might need to contact a professional technician to fix the issue
Defy DTL153 17kg Top Loader Stainless Steel
I couldn't find a manual for the Defy DT153. However, the directions for the DT151 might help,
https://www.manualslib.com/manual/1143848/Defy-Dtl151.html?page=11#manual . Make sure that the machine is powered first. To toggle the child lock on and off, press Wash and Rinse simultaneously. If you look at the image on the above page, you will note there is a line between the two buttons with a padlock symbol. Look for a similar padlock on the DT153 control panel for the child lock option on your machine. More information on the child lock for the DT151 is here: https://www.manualslib.com/manual/1143848/Defy-Dtl151.html?page=13#manual .
On other machines, you have to hold the buttons for several seconds (3-10) until the machine responds. If you hold the buttons too long, the lock will re-engage.
I hope this helps.
Cindy Wells
12/13/2023 5:16:19 AM •
Stainless...
•
50 views • 0 helpful votes
Not finding what you are looking for?