Optics - Answered Questions & Fixed Issues
How to replace the electrical cord
The simplest is buy cutting the old one by 5 inches ,removing the isolation connect all 3 wires to new electrical cord .NOTE : observe the color of each wire usually the green is the grounding. After connecting use electrical tape for final touch.
8/26/2021 2:38:43 AM •
on Aug 26, 2021
How much range should my rangefinder have?
The answer depends on the purpose of your rangefinder
and your own requirements. For bow hunting, 100 yards is more than enough. On the other hand, for rifle-hunting you, the range will vary widely depending on where, what and how you hunt and on your proficiency and style. Typically you are looking at a wide range of 200 yards to 800 yards. For golfing again, it depends on the circumstances. You can work with a rangefinder with a range of anywhere between 200 yards to 600 yards. The yardage described here is relative to dark trees. Do not forget to find out what the advertised yardage is relative to - specifications can vary from highly reflective surfaces to deer sized targets.
8/18/2021 8:09:02 AM •
on Aug 18, 2021
Cut wires on a night owl security system
My cameras were cut on my night owl so on the camera side there is 3 small wires which are green red and white and there is also a grey which is thicker strip back the grey and you'll find a yellow wire those under the grey cover will go spliced into the big white wire on the connector side that goes to your dvr and the wire between the grey and yellow needs to splice onto the outside wire that's between the black cover and white wire on the dvr side also on the dvr wire there will be a red and black wire connect the red wire to the three small wires on the camera and it should work I did not use the black wire because I couldn't find where it connects I have a night owl series vdp2
8/11/2021 2:26:23 AM •
on Aug 11, 2021
Not finding what you are looking for?