Irons - Page 9 - Popular Questions, Answers, Tips & Manuals

There are no user serviceable parts in this device. unplug it for 2 minutes- make sure the reservoir is filled with water, and the power is off- plug it in and turn thee power on- wait for the ready light to illuminate and try to use it. good luck https://www.6ya.com/mrmmike

Aply colgate on the surface of the iron, waite few minutes for it to stick thoroughly then srub it off with a cloth. It comes off with the dirt..

There is a bad seal on the water reservoir or the steam tank inside the iron.

https://www.proctorsilex.com/faqs-irons

You are probably not holding the iron the right way! Don’t hold the iron upside down, or don’t put too much water in at a time. Make sure that the heat on iron is turned up hot enough to burn the water fast enough so it doesn’t leak.

http://www.fixya.com/support/t26818219-russell_hobbs_slipstream_15129_iron_not

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help thanks

Marion, I've scoured the internet and I am stumped. I'd call Walmart or someone that sells them and see if they've got one laying around or email the company.

Pour in some vinegar (half) and some water (half) in the machine. Turn it on and let it run a bit. Make sure to do it outside since it smells badly. After that, rinse a few times before use.

Is it a power switch that lights up? Many of these units have gas-filled (Neon) type lights in then and when they start to fail they flicker most times before they go completely. Not to worry though it doesn't mean the unit itself is failing. If it is the light you'll just have to do as my mother did back in the day and lick the tip of your finger and quickly tap the face (Hot Part) If hot it will make a sttt sound.

Is it a power on light? an illuminating instrument light? Many of these units have gas-filled (Neon) type lights in them and when they start to fail they flicker most times before they go completely. Not to worry though it doesn't mean the unit itself is failing. If it is the light you'll just have to do as my mother did back in the day and lick the tip of your finger and quickly tap the face (Hot Part) If hot it will make a sttt sound.

http://www.fixya.com/support/t27001330-steam_button_phoenix_gold_iron_wont_turn

http://www.fixya.com/support/t1092963-iron_not_heating_up it's been answered.

You can probably buy them in a set. I’m sure one will fit.

Most likely it is a broker electrical wire that makes random contact ( in / out) when the iron is being moved. You may have to disconnect the iron, take the upper covers out, look for broker wires and replace the wire

Since the new iron does not have a cleaning button, use distilled water only. Also, cleaning with a mild vinegar solution will help keep it in good shape. Just be sure and rinse the solution out.

It could be a solenoid valve problem inside its mostly always on the watertank to the hose

it is defective. you should not use a steam press (make and model unknown) when it has a leak and water could possibly contact the electric power circuit. this could be a life threatening health issue.

White vinegar

switch -element failure