Home Fencing - Recent Questions, Troubleshooting & Support

0helpful
1answer

The remote of my Centurion D5 gate motor is opening the gate but not closing it. What can I do to rectify this?

We help managers make the right hiring decision consistently to ensure their companies continue to thrive, staffed with the best men and women for the job. We are the world's primary choice in pre-employment Integrity testing. Read more: Pre employment integrity test
6/3/2022 2:57:31 AM • Home Fencing • Answered on Jun 03, 2022
0helpful
2answers

Ramset RAm-100 gate opener. Why doesn't gate open?

BAD MOTOR PERHAPS
5/26/2022 11:20:55 AM • Home Fencing • Answered on May 26, 2022
0helpful
1answer

I have a DTS gate motor that opens everytime there is a strong lightning storm in the area. please give advice

Shield the control box with Aluminum or lead foil to cut out EMI.
2/15/2022 10:52:42 AM • Home Fencing • Answered on Feb 15, 2022
0helpful
1answer

Elite Miracle One gate opener opens 6 inches and then stops.

Disconnect the power to it for 5 minutes to Reset it. Then press the Reset button. If that doesn't work call for professional service https://www.affordableopeners.com/manuals/gate_operators/elite/miracle1/manual.pdf ..
1/8/2022 6:38:47 PM • LockMaster... • Answered on Jan 08, 2022
0helpful
3answers

What is the best fence I can use for my dog?

First, try to get a fence made from a durable material like aluminum or a wire fence. Of course you will compromise the looks...don't get a wooden fence unless it is more expensive since big dogs tend to ruin them
12/3/2021 3:05:19 AM • Home Fencing • Answered on Dec 03, 2021
0helpful
1answer

Led lights that glow when power is off?

I think you should hire a competent electrician. your question indicates you aren't qualified or competent to work on electric power, and it could cause a fire.
11/6/2021 5:11:04 PM • Home Fencing • Answered on Nov 06, 2021
0helpful
2answers

The centurion gate motor open by itself how can I fix that problem please

Do you have sensors that stop the gate closing on people or cars ? If so put your ear near the sensor but not inline with the opposite one. Now gently wave your hand in front of it .... if there is no click then something is obstructing the beam. Sometimes spiders get inside and spin that candy floss type web in there .
9/13/2021 11:52:46 AM • Home Fencing • Answered on Sep 13, 2021
0helpful
1answer

Master code on liftmaster TAC1/TAC2

Contact Liftmaster directly to request the master code.
7/20/2021 4:59:22 PM • Home Fencing • Answered on Jul 20, 2021
0helpful
3answers

DISSASEMBLEY OF A DOUBLE PANE GLASS WINDOW TO REMOVE WHITE FROST GLAZE BETWEEN THE PANES?

How to Replace Double Glazing in uPVC WINDOWS Cheaply replace blown double glazed window panes in uPVC windows following this video. You just need to look for a local double glazing supplier. Look in local directories for uPVC or Glass manufacturers or suppliers, or use the Internet. Some also deliver to your door. Save a fortune by doing it yourself! Go to this youtube video: https://youtu.be/hyn8BQXgquE or search on google for "comeinhandynow double glazing"
4/10/2021 6:19:55 AM • Home Fencing • Answered on Apr 10, 2021
0helpful
1answer

Just hooked up exit wand to Mighty Mule 360, gate keeps opening and closing randomly.

The timing relay has to be setted right. There is a time control on every unit,. 1-[Distance has to be set right before setting time relay] 2-(opening time and closing time has to be set accordingly to ur safety and wanting)
3/27/2019 7:05:27 PM • Home Fencing • Answered on Mar 27, 2019
0helpful
1answer

Why are my points going to my level when i play double downs casino ?

What do you mean points? Level Points? Anyway free chips here https://thegamereward.com/double-down-casino-codes/
3/9/2019 7:40:38 AM • PetSafe RF-1010... • Answered on Mar 09, 2019
0helpful
1answer

I am having trouble with my Elite CSW-200-UL gate on my driveway. It has randomly been responding to the remotes and then I had to punch in the code to make it work. Now it is not responding.

The first place to look is your receiver. This is the device, often separate from the actual gate operator, that responds to your transmitter. Stand next to the gate operator and you should hear a small click coming from the receiver when you or someone else pushes the button. You can sometimes find the receiver by following the antenna cable back to it. If it does not have an external antenna, look inside the operator box for either an antenna screwed into the receiver or a wire hanging from a plastic box. If you hear the click and the gate does not open, the possibilities grow exponentially so we won't try to address every possibility here. If you hear a click when you are close, but not when the transmitter is triggered at a distance, check the antenna. If you don't hear the click, then either the remote has lost programming (this often happens with rolling codes transmitters when they are not used for a long time), or the receiver is not working. Check to make sure the receiver is getting plenty of power power using a meter. It should read at the recommended voltage or a bit higher. Usually around 24 volts but some receivers can work down to 12 volts. If it gets plenty of power and the remotes have been programmed back in, consider replacing the receiver.
3/8/2019 12:26:58 AM • Home Fencing • Answered on Mar 08, 2019
0helpful
1answer

I have an Aleko LM171 keypad for my gate which no-one knows the PIN to so I can reset from previous owner. How do I reset the keypad back to factory so I can re-programme with my PIN?

Go to the manufacturers website, download the user manual and you will most likely find it in the manual.
1/15/2019 11:37:17 AM • ALEKO Lm176... • Answered on Jan 15, 2019
0helpful
2answers

My Hino 2011 300 series tipper has been parked for three weeks. Will not go into any gear ,clutch pedal still has tension as if normal Can anyone help

The clutch plate is probably stuck. If you have a clear space in front of the truck select first gear, release the parking brake and start the engine with your foot on the clutch. The vehicle will lerch forward and the engine should start with the vehicle now moving forward. Hit the brakes with your left foot still on the clutch and the clutch will probably release and work normally.
1/15/2019 1:47:38 AM • Hino 2006 268 • Answered on Jan 15, 2019
0helpful
2answers

I have acquired a remington model 476 powder

remington model 476 power nailer
10/19/2018 12:45:59 PM • Home Fencing • Answered on Oct 19, 2018
0helpful
1answer

How to refill fluid

interesting question. now, if only we could also know what pump does not pump, what fluid you are refilling, a good answer would be able to be provided.
10/19/2018 12:46:27 AM • Greenlee 15910... • Answered on Oct 19, 2018
0helpful
1answer

I really need a lazy susan,if anyone has got it,please help me out

you can find one via the internet. doh.
10/19/2018 12:42:29 AM • Home Fencing • Answered on Oct 19, 2018
0helpful
1answer

Transmitter with dogtek 4000 keeps beeping

remove the battery.
10/19/2018 12:41:24 AM • Dogtek... • Answered on Oct 19, 2018
Not finding what you are looking for?
Home Fencing Logo

148 questions posted

Ask a Question

Usually answered in minutes!

Top Home Fencing Experts

Tom Chichester

Level 3 Expert

62329 Answers

ray gallant

Level 3 Expert

74163 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

49955 Answers

Are you a Home Fencing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...