Garment Steamers & Presses - Recent Questions, Troubleshooting & Support

0helpful
1answer

Will not reset

Check Water Level: The first thing to verify is the water level in the tank. If the Power Indicator light on the Homedics humidifier is red, it may indicate that the tank is running low on water. Ensure that the water reservoir is adequately filled. If you've refilled the tank and the red light persists, try resetting the steamer by pressing the Power button down for 3 to 5 seconds before turning the unit on again. Reset the Steamer: To reset the red flashing Clean Indicator on your Homedics garment steamer, follow these steps (depending on your model): Press and hold the Power button, Clean button, or Clean Transducer/Ultrasonic membrane button until the light goes off. Plug in the steamer, turn it on, and set all the controls. Inspect for Other Issues: If the red light persists after trying the above steps, inspect your steamer for other potential issues: Ensure that the water container is correctly seated. Check for any water inside the unit. Verify that the float (if applicable) is properly placed. Clean the steamer if needed (see instructions below). Cleaning the Steamer: Regular cleaning is essential for optimal performance. Here's how to clean your Homedics garment steamer: Turn off and unplug the steamer. Empty any remaining water from the reservoir. Clean the steam nozzle and other parts according to the instruction manual. If your model has a removable water tank, wash it thoroughly. Wipe down the exterior of the steamer. After cleaning, reset the indicator light as mentioned above
5/12/2024 7:43:10 PM • Homedics... • Answered on May 12, 2024
0helpful
1answer

I have lost the plug for the ps 200

  • Unfortunately, I couldn't find specific information about replacement plugs for the PS-200 model. However, you may want to contact HoMedics customer support directly or check their official website for assistance.
5/12/2024 7:35:35 PM • Homedics Home... • Answered on May 12, 2024
0helpful
1answer

Faulty PS-garment steamer reset button

Check the Power and Steam Settings: Ensure that the unit is plugged in and turned on. Press the steam setting button to standby mode. If the power button is not lit, press it to turn the unit on. Water Level and Reset Button: Make sure there is enough water in the removable water tank. The PS-250 has a reset button. If the unit runs out of water, it will automatically shut off to ensure safe use, and a red indicator light will come on (above the reset button). Cooling and Restart: If you've been using the steamer and it suddenly stopped working, unplug it. Empty any remaining water from the tank. Wait for the garment steamer to cool down. Snap the water tank back into place before storing it1. Inspect the Water Tank Cap: Sometimes issues can arise due to a faulty water tank cap. If you suspect the cap is causing the problem, consider checking for any damage or leaks. You can also purchase a replacement cap for the PS-250 Garment Steamer. Contact Customer Support: If the above steps don't resolve the issue, I recommend reaching out to Homedics customer support. They can provide further assistance or guide you through additional troubleshooting steps. https://itsmanual.com/homedics/ps-200-steamer/
5/12/2024 7:30:39 PM • Homedics PS-250... • Answered on May 12, 2024
0helpful
1answer

My steamer is showing no power. I checked different outlets.

Check the Power Connection: Ensure that the steamer is plugged in to a working electrical outlet. If it's already plugged in, try a different outlet just to be sure. Turn On the Steamer: Sometimes, the unit may not turn on if it's not properly activatedPress the power button or the steam setting button to turn the unit on. Inspect the Water Tank: Make sure the removable water tank is filled with water. If it's empty, the steamer won't work. If the water tank is full, check if it's properly seated in its place. Check for Overheating: If the steamer has been used for an extended period, it might have overheated. In this case, allow it to cool down before attempting to use it again. Low Water Auto Shut-Off: The steamer is equipped with a low water auto shut-off feature for safety. If the water level is too low, the unit will automatically turn off. Refill the water tank and try turning it on again. Inspect the Power Cord: Check the power cord for any visible damage or fraying. If you find any issues, it's best to replace the cord. Contact Customer Support: If none of the above steps resolve the issue, consider reaching out to HoMedics customer support
5/12/2024 7:24:11 PM • Homedics PS-250... • Answered on May 12, 2024
0helpful
1answer

Why does water leaks together with the steam and how to fix it?

there are a few potential reasons and troubleshooting steps you can take: Water Reservoir Issues: Ensure that the removable water tank is properly seated and securely attached to the steamer. If it's loose or not positioned correctly, water may leak. Check for any cracks or damage in the water reservoir. If you find any, consider replacing it. Steam Hose and Connections: Inspect the 5-foot flexible hose that connects the water reservoir to the steam nozzle. Look for any kinks, bends, or damage. Make sure all connections are tight and secure. Loose connections can lead to water leakage. Steam Nozzle and Soleplate: Examine the steam nozzle and soleplate (the part that contacts your garments). If there are any visible cracks or damage, it could cause leaks. Clean the steam nozzle and soleplate thoroughly to remove any mineral deposits or debris. Use a soft cloth or sponge. Water Quality: The quality of water you use can impact the steamer's performance. Hard water with high mineral content can lead to clogs and leaks. If you're using tap water, consider using distilled water instead. Distilled water has fewer minerals and reduces the risk of clogs. Steamer Position: Ensure that the steamer is placed on a flat, stable surface. Tilting or uneven positioning can cause water to leak. Avoid overfilling the water tank. Follow the recommended fill level to prevent leaks. Auto Shut-Off Feature: The low water auto shut-off feature is designed to turn off the steamer when the water level is too low. If it's malfunctioning, it might cause leaks. Check the user manual for instructions on adjusting or disabling this feature. HOME Touch Perfect Steam Deluxe Commercial Garment Steamer - Homedics
5/12/2024 7:20:09 PM • Homedics Perfect... • Answered on May 12, 2024
0helpful
1answer

Why wont the red light turn off on my conair Home touch PS-250B ?

If the red light remains on even after pressing the button, it could be due to a few reasons: Water Level: First, check if the water container is empty. If it is, refill it with cold water. Mineral Build-Up: The steamer might have mineral build-up. In areas with high mineral content in the water, this can happen more frequently. To address this: Remove mineral build-up by following the procedure in the user manual. Clean the reservoir and water container regularly. Auto Shut-Off: Ensure that the auto shut-off feature is not engaged. If it is, the steamer won't heat up. Make sure the ON/OFF switch is in the "ON" position. Electrical Connection: Confirm that the steamer is properly plugged into an electrical outlet. If the issue persists, consider referring to the user manual for further troubleshooting steps. Cool Down Before Storage: After using the steamer, turn it off and unplug it. Allow the steamer to cool down for at least 30 minutes before storing it. User manual Home Touch PS-250 (English - 12 pages)
5/12/2024 7:12:39 PM • Homedics Garmet... • Answered on May 12, 2024
0helpful
1answer

How to descale

Here's how you can do it: Prepare the Solution: Mix equal parts of white vinegar and water. For example, use 1 cup of vinegar and 1 cup of water. Pour the solution into the water tank of your steamer. Run the Steamer: Plug in the steamer and turn it on. Allow the vinegar-water mixture to heat up and produce steam. Let the steam flow through the nozzle for a few minutes. Empty the Tank: Unplug the steamer and let it cool down. Empty the tank completely. Rinse the Tank: Fill the tank with clean water. Run the steamer again to flush out any remaining vinegar residue. Empty the tank once more. Inspect the Steam Head and Nozzle: Check the steam head and nozzle for any remaining scale or mineral deposits. Use a soft brush or cloth to remove any buildup. Final Rinse: Fill the tank with clean water one last time. Run the steamer to ensure all traces of vinegar are gone. Empty the tank and wipe down the exterior.
5/12/2024 7:08:10 PM • Rowenta IS9200... • Answered on May 12, 2024
0helpful
1answer

How do I clean the scale from rowenta 1400 pro compact garment steamer

To clean the scale from your Rowenta 1400 Pro Compact Garment Steamer, follow these steps: 1. **Models with Scale Collector: - Rinse the scale collector under water. - The next time you use your steamer, press the "restart" button to turn off the orange "Anti-calc" light (depending on the model). 2. **Models without Scale Collector: - Rinse the boiler thoroughly to remove any scale buildup. To descale your Rowenta 1400 Pro Compact Garment Steamer, you don't necessarily need a special solution. However, using a vinegar-water mixture is a common and effective method for descaling steamers. Here's how you can do it: Prepare the Solution: Mix equal parts of white vinegar and water. For example, use 1 cup of vinegar and 1 cup of water. Pour the solution into the water tank of your steamer. Run the Steamer: Plug in the steamer and turn it on. Allow the vinegar-water mixture to heat up and produce steam. Let the steam flow through the nozzle for a few minutes. Empty the Tank: Unplug the steamer and let it cool down. Empty the tank completely. Rinse the Tank: Fill the tank with clean water. Run the steamer again to flush out any remaining vinegar residue. Empty the tank once more. Inspect the Steam Head and Nozzle: Check the steam head and nozzle for any remaining scale or mineral deposits. Use a soft brush or cloth to remove any buildup. Final Rinse: Fill the tank with clean water one last time. Run the steamer to ensure all traces of vinegar are gone. Empty the tank and wipe down the exterior.
5/12/2024 7:05:20 PM • Rowenta... • Answered on May 12, 2024
0helpful
1answer

Rowenta steam valet no steam

Here are some steps you can take to address the "no steam" problem: Check the Power Connection: Ensure that the steamer is properly plugged into a power socket. Verify that the switch is set to the "I" position (on). If the steamer is not plugged in or switched on, it won't produce steam. Water Level in the Tank: If the water level in the tank is too low, the steamer won't generate steam. Unplug the appliance and fill the water tank to the recommended level. Inspect the Water Tank: Make sure the water tank is securely attached to the steamer. If the tank is not properly connected, it may affect steam production. Clean the Steam Head and Nozzle: Mineral deposits or scale buildup can clog the steam head and nozzle. Regularly clean these parts to maintain optimal performance. Allow Sufficient Heating Time: The Rowenta Master Valet Garment Steamer has a quick heat-up time of 60 seconds. Wait for the steamer to reach the desired temperature before expecting steam. Check the Fabric Type: Ensure that you're using the appropriate fabric setting for the garment you're steaming. The steamer is designed for various fabrics, including suits, dresses, shirts, and pants. Inspect the Hose and Connections: Check for any kinks or blockages in the fabric hose. Make sure all connections are secure. https://www.rowentausa.com/LINEN-CARE/GARMENT-STEAMERS/MASTER-VALET-GARMENT-STEAMER-IS6300/p/1830004290
5/12/2024 6:59:07 PM • Rowenta Master... • Answered on May 12, 2024
0helpful
1answer

My rowenta does not steam and I read it may be a capacitor but Rowenta website does not list parts replacement.

It Rowenta does not offer a replacement part, the only option I can think of is to check an approved appliance repair shop. I am assuming you have gone through other DIY tests and narrowed the issue to this part. Otherwise, the following might be checked: Check Power and Water: Ensure that your steamer is properly plugged in and switched on. Sometimes, a lack of steam can be due to a power issue. Verify that the water level in the tank is sufficient. If it's too low, the steamer won't produce steam. Unplug the appliance and fill the tank if needed. Prime the Pump: If the pump is unprimed, it may not generate steam. Press and hold the steam button for a few seconds to prime the pump1. Inspect the Water Tank: Make sure the removable water tank is correctly installed. Improper positioning can lead to steam issues. Check if the tank's locking valve is closed properly. Exit Stand-by Mode: If your steamer is in "Stand-by" mode, press the "On-Off" button and wait until the light stops flashing
5/12/2024 6:50:28 PM • Rowenta... • Answered on May 12, 2024
0helpful
1answer

How do i unblock the vitesse steamer

Decalcify the Steamer: Mineral deposits can clog the steamer and prevent steam from flowing. To address this, create a solution using equal parts water and white vinegar. Pour this solution into the water reservoir of your steamer. Turn on the steamer and allow it to heat up. The vinegar will help dissolve the mineral deposits. Run the steamer until the solution has evaporated. Rinse the water reservoir thoroughly with clean water. Check the Water Reservoir: If your steamer runs out of water, it won't produce steam. Make sure the water reservoir is adequately filled. If you've been using the steamer consistently, the steam flow may decrease over time. Refilling the water reservoir should rectify this issue. Flush Sediment and Limescale: Sometimes, sediment and limescale can accumulate in the steamer, causing blockages. Here's how to flush out sediment and limescale: Disconnect the hose, pole, and other attachments from the steamer. Place the steamer in a large sink or bath. Unscrew the small drainage valve (if your steamer has one). Run water through this small hole until it runs clear, flushing out any sediment or limescale. How To Troubleshoot And Fix A Steamer ' Hunker
5/12/2024 6:40:32 PM • Garment Steamers... • Answered on May 12, 2024
0helpful
1answer

Just bought one and it's not heating up enough to generate hot water. Any ideas??? So disappointed

Check Water Level: Ensure that there is enough water in the water tank. If there is not enough water, the steamer won't be able to create steam. Even if you're cooking for a short time, make sure the water reaches at least the top of the heater (the grey part). Sometimes, it may take a little time before it starts steaming. Descaling: If there are minerals from the water adhered to the heater, it may not transmit heat correctly, and steam may not be generated. If you notice any changes such as discoloration (brown, black, or white) or peeling on the surface of the heater, descaling is necessary. You can carry out a descaling process to clean the appliance. Heater Maintenance: Regularly check the heater for any signs of damage or discoloration. If you notice any issues, follow the manufacturer's guidelines for maintenance and care. Timer and Water Level: Set the timer appropriately (around 10 minutes, depending on the food) and ensure there is enough water in the tank. The bell will notify you when your food is ready to eat, so you don't need to watch the steamer constantly. User manual and frequently asked questions Balanced Living Compact 2-Tier VC133851 (t-falusa.com)
5/12/2024 6:36:15 PM • Tefal T-Fal... • Answered on May 12, 2024
0helpful
1answer

Pressure does not build up and it does not work any more - leaky valve- how do I fix that?

Here are some steps you can follow to address the problem: Check the Water Tank and Reservoir: Ensure that the water tank is filled with distilled water. Using tap water can lead to mineral buildup, which might affect the steamer's performance. Make sure the reservoir is not overfilled, as this could cause damage to the unit. Allow a 30-minute cool-down period before refilling it Inspect the Safety Cap: The safety cap should rotate but not unscrew until the unit has cooled down and pressure is released2. Make sure it's properly secured. Steam Pressure Light: When you turn on the machine, wait for the orange steam pressure light to turn off. This indicates that the machine has built up sufficient steam pressure and is ready to use. Valve Check: If you suspect a leaky valve, inspect the steam gun and its components. Look for any visible damage or signs of wear. Ensure that all connections are tight and secure. If there's a specific valve that seems to be leaking, check its condition. Wallpaper Removal Tip: If you're using the steamer for wallpaper removal, hold the steam plate flat against the wallpaper for 20-30 seconds. Then remove the steam plate and scrape the steamed section of wallpaper. Scoring the wallpaper before steaming can improve results. Contact Customer Service: If the issue persists, consider reaching out to HomeRight's customer service. They can provide further assistance or guide you through any additional troubleshooting steps. HOMERIGHT STEAMMACHINE ELITE INSTRUCTION MANUAL Pdf Download ' ManualsLib
5/12/2024 6:30:55 PM • Homeright... • Answered on May 12, 2024
0helpful
1answer

Cord coming apart, where do i get a cord?

  1. Local Appliance Repair Shops:Visit local appliance repair shops or sewing machine repair centers. They might have compatible cords or be able to repair the existing one
  2. Reach out to EuroSteam's customer support.
  3. Search online retailers or spare parts stores for replacement cords compatible with EuroSteam irons. Make sure to specify the model of your iron when searching.
5/12/2024 6:24:03 PM • EuroSteam Steam... • Answered on May 12, 2024
0helpful
1answer

Can I use culligan water as my water goes thru a softener?

You can confidently use your Culligan water with the Rowenta Focus Steam Iron DW5080. Its Anti-Calcium system will help maintain clean steam output even with regular tap water.
5/12/2024 6:18:31 PM • Rowenta inc.... • Answered on May 12, 2024
0helpful
1answer

I need parts of my home touch ps 280 parts, Where can I find it?

The Polaris 280 is a popular pool cleaner, and it has various parts that you might need. Here are a few options for finding the parts you're looking for: ePoolSupply: You can visit the ePoolSupply Polaris 280 Parts & Diagram page to explore a detailed diagram and find specific parts for your Polaris 280. They offer a variety of replacement components, including screws, washers, and other essential items. My Pool: Another option is to check out the Polaris 280 Parts Diagram on My Pool. They provide a comprehensive list of parts for your Polaris 280 pool cleaner. Leslie's Pool Supplies: If you prefer to shop from a pool supply store, you can visit Leslie's Pool Supplies. They offer replacement parts for various Polaris models, including the 280 Polaris 280 Parts & Diagram ' ePoolSupply Polaris 280 Pool Cleaner Parts ' Leslie's Pool Supplies (lesliespool.com) Polaris 280 Parts Diagram ' My Pool
5/12/2024 6:14:09 PM • Homedics Garmet... • Answered on May 12, 2024
0helpful
1answer

The lid just turns and turns, never getting any higher to remove it.

Check the Cord and Indicator Light: First, unplug the machine. Run your hand along the cord to check for any damage or exposed wires. If you find any issues, consider getting it fixed or replacing the machine. If the indicator light fails to turn on, there might be a problem with the cord. If the indicator turns on but won't turn off (the water is not getting hot), there could be an issue with the heating element. Make sure you're using cool water only, as adding anything else can damage the heating element and void your warranty. Steam Nozzle Blockage: If the Bissell Steam Shot has successfully heated up the water (the indicator light turns off when it's ready), but there's no steam when you press the trigger, the steam nozzle may be blocked. Try removing the tool from the Bissell Steam Shot and see if it produces steam without the tool attached. If it does, clean and unclog the spray tip on the tool using a paperclip. Water Tank Cap Stuck: The water tank cap might not come off if the steam temperature inside the tank is too hot. Unplug the machine and allow it to cool down before attempting to open the cap. To relieve pressure inside the machine, hold the steam trigger before opening the water tank cap. 5 Problems With Bissell SteamShot (And Their Solutions) - Cleaners Talk
5/12/2024 6:04:22 PM • Bissell Steam... • Answered on May 12, 2024
Not finding what you are looking for?
Garment Steamers & Presses Logo

202 questions posted

Ask a Question

Usually answered in minutes!

Top Garment Steamers & Presses Experts

Don A
Don A

Level 3 Expert

4844 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

67757 Answers

john h

Level 3 Expert

29494 Answers

Are you a Garment Steamer and Press Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...