Freezers - Popular Questions, Answers, Tips & Manuals


Disconnect the power again for 5 minutes and then put a dinner knife across the two mains plug pins. Then plug it back in. If it doesn't work after that you need an engineer. The main board or other components may have been damaged by a power spike when the power cut.

Frigidaire... | 14 views | 0 helpful votes


we have no way of knowing that

Freezers | 13 views | 0 helpful votes


Orange light means it cannot cool properly. I would get it checked by a competent refrigeration engineer.

Freezers | 14 views | 0 helpful votes


in settings alarm might be turned off

Frigidaire... | 17 views | 0 helpful votes


It's a freezer. The temperature should be minus 18.C, yours is showing 0'C. It is telling you the freezer is 18' hotter than it should be.
https://www.defy.co.za/amfile/file/download/file/166/product/1996/

..

Freezers | 19 views | 0 helpful votes


a number that long looks like a serial number rather than the Model Number. I doubt the temperature alarm can be disconnected. You _may_ be able to remove the sounder, but don't forget, it is provided for your safety and stop all your food spoiling unannounced. If the alarm keeps going of, it is for a reason and needs fixing.

Kenmore Freezers | 14 views | 1 helpful votes


The green light may have failed without affecting operation.

Freezers | 14 views | 0 helpful votes


Check with an appliance parts supplier to determine whether the Ranco unit is a specified replacement for the Beaumark. Also, it is possible that the Ranco thermostat is defective, though new.

Freezers | 22 views | 1 helpful votes


That is what it is supposed to do. It is called cycling and switches off when the set temperature is reached. It is a commercial freezer, so if the door opened and closed often, that is normal?

Commercial freezers and fridges have an item called a 'Clixon' that cuts power in the case of the compressor overheating. When was the last time the fins on the compressor coils were cleaned?

Could also be a bad door seal letting cold air escape. When you close a freezer door on a unit like that, it should be really hard to open straight afterward due to the suction.

Could be a faulty thermostat. Turn the temperature to the warmest setting and see if it still does it? If it does, you need a new thermostat.

I just retired after 52 years in catering.

https://www.katom.com/598-T23F.html?gclid=CjwKCAiArbv_BRA8EiwAYGs23PKtEzF60_OMVNpHXBlGjHQNdpp0pDZsu0G0lFLqVy2p4qIybG9n8xoCwEMQAvD_BwE

..

True Freezers | 14 views | 0 helpful votes


Probably the blinking green light is an indication that something is wrong with the compressor or a related component.

Freezers | 15 views | 0 helpful votes


That unit is surprisingly clean. It may have had the fan module that you can see in picture, replaced and whomever replaced it, did not put the lug back on or it was not there with the newer unit.

Freezers | 18 views | 0 helpful votes


One of these is a power light. It typically remains on while the freezer is in use. No light means either a blown bulb or no power. The other is associated with the thermostat. But it does NOT indicate that freezer temperature is appropriate. Flickering appears to indicate the bulbs are simply failing. The bulbs are neon, I think, and are not cheap. Some might try replacing such with LEDs. I have seen comment that the bulbs are not long lasting. www.manualslib.com has numerous danby freezer manuals but I do not know your model. Have a look.

Danby Freezers | 17 views | 0 helpful votes


Clicking sound is overheat at the compressor. There is a device called a Clixon that is cutting and restarting. Remove covers and clean the condenser grill with a vacuum cleaner and brush.

Freezers | 18 views | 0 helpful votes


https://www.searspartsdirect.com/manual/383uw3lzpd-003083/wc-wood-v12naa-upright-freezer

Page 6. Note the arrow in the drawing I suspect you want to unplug a clogged freezer drain. There are a number of youtube videos and web pages describing methods for you to consider if you google such. As I don't know the model of your freezer, I can't point to a specific remedy. I include one webpage as an example of a procedure. The page below simply describes pan locations.

https://homeguides.sfgate.com/drip-pan-refrigerator-27482.html

https://www.youtube.com/watch?v=H_DKNtgd5vI

The company went into liquidation in 2009. There is an Ohio phone number but I am unable to find an active webpage for support. (419) 523-9663 Parts appear available from Sears Direct. Here is access to manuals for a number of models. https://all-guidesbox.com/model/wc-wood/c1517w3.html

Woods Freezers | 14 views | 0 helpful votes


I would call the SearPartDirect unit, supply the model and serial number, and request the thermostat. I can't find your specific model via a search on their page but they may have the part anyway used in another model. https://www.searspartsdirect.com/combo/3083-1234585/wc-wood-freestanding-freezer-parts

Alternatively, you might call the repairclinic number.
https://www.repairclinic.com/Shop-For-Parts?query=woods%20V12wau%20thermostat%20for%20upright%20freezer

Woods Freezers | 16 views | 0 helpful votes

Not finding what you are looking for?
Freezers Logo

14,363 questions posted

Ask a Question

Usually answered in minutes!

Top Freezers Experts

Dennis Boxerman

Level 3 Expert

1305 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...