Floor Polishers & Buffers - Recent Questions, Troubleshooting & Support

0helpful
2answers

How to find total floor polishing service provider in Melbourne?

Timber Floor Sanding and Polishing Melbourne Use this guy, i have used them before & they are very affordable & professionals for sure
10/26/2021 5:33:53 AM • Floor Polishers... • Answered on Oct 26, 2021
0helpful
1answer

Our Ultra D.C. Burnisher starts instantly when the cord is plugged in, even before pulling the safety trigger levers. Can you suggest a reason for this?

The switch has gone bad. Very common on these. The contacts in the switch wear out and then get welded together. The motor draws a lot of power when first started and this is ******* the switch.
6/28/2019 12:10:47 AM • Mercury Floor... • Answered on Jun 28, 2019
0helpful
1answer

I need replacement buffing pads for my Miele floor polisher 4000S. Are they still available?

Any janitorial supply in your town, or ebay. Your Home Depot or Lowe's may have them as well as Amazon.
6/28/2019 12:03:33 AM • Floor Polishers... • Answered on Jun 28, 2019
0helpful
1answer

How to change a rectifier on a U2000 floor buffer?

The rectifier is in the top end of the motor. Take the cover off and then the top end plate of the motor. With the bolts removed, you will have to tap and rock the plate to evenly remove it. Carefully look at the marks on the old and new part to be shur you do not make a mistake in the wiring. A drawing and photo might be nice too.
6/28/2019 12:00:26 AM • Floor Polishers... • Answered on Jun 28, 2019
0helpful
1answer

Have a 17hp kawasaki propane buffer wont crank and seems to get no power at all

Use your volt meter to test the battery voltage. It should be at least 12.4v . I this is good, follow the voltage through the ignition switch and the relay if it has one, on to the starter. If you have power on to the starter, but still no crank, the starter is bad. Hope this helps, Robert
10/31/2018 1:55:32 PM • Eagle Propane... • Answered on Oct 31, 2018
0helpful
2answers

Where can I find a manual for model b-8

The manual for the Electrolux B-8 Shampooer has just been uploaded.
3/7/2018 7:38:25 AM • Electrolux Floor... • Answered on Mar 07, 2018
0helpful
1answer

How to clean carpets with b-8

The manual for the Electrolux B-8 Shampooer has just been uploaded.
3/7/2018 7:37:42 AM • Electrolux Floor... • Answered on Mar 07, 2018
0helpful
1answer

Electrolux manuals

The owner's manuals for the Electrolux (now Aerus) B-8, B-9 (Floor Pro and similar models), and the TriStar ProStar shampooer (same machine as the Floor Pro) have just been uploaded.
3/7/2018 7:33:57 AM • Electrolux B8,... • Answered on Mar 07, 2018
0helpful
1answer

Where can I find a manual for an Electrolux 2101 shampooer?

This is the B-8 model shampooer. I just uploaded it under Electrolux B-8 Shampooer.
3/7/2018 7:12:01 AM • Electrolux... • Answered on Mar 07, 2018
0helpful
1answer

Numatic floor washer stop start

What exactly is the question here? Is this a corded electric Scrubber or a battery one?
12/27/2016 9:29:06 AM • Floor Polishers... • Answered on Dec 27, 2016
Not finding what you are looking for?
Floor Polishers & Buffers Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Top Floor Polishers & Buffers Experts

Robert Wooley
Robert Wooley

Level 2 Expert

190 Answers

jabberwoky

Level 3 Expert

739 Answers

Are you a Floor Polisher and Buffer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...