Cameras - Page 8 - Recent Questions, Troubleshooting & Support

0helpful
1answer

My Fujifilm camera wont start up correctly.

This is 12 years old and if it has been left in a cupboard unused for some time, will require a good Fuji service centre to replace the leaking capacitors.
12/7/2023 9:24:44 PM • FUJIFILM Cameras • Answered on Dec 07, 2023
0helpful
1answer

Digitrex tv RC6045D remote control code

The code for Digitrex TV RC6045D is 3194 3067
11/30/2023 9:43:07 PM • Apex Digital... • Answered on Nov 30, 2023
0helpful
1answer

Place date stamp on the screen photograph

Only on cameras that have that feature, but unfortunately you give not clue what your mystery camera is. Google make model manual They are all online.
11/30/2023 9:43:00 PM • Cameras • Answered on Nov 30, 2023
49helpful
2answers

Can't move photos from internal memory to memory card

Yes, it can be done. Here are the steps to copy them over:

1. Turn on your camera
2. Press the button to view the pictures you have taken (the button that has the green sideways triangle with the green square around it).
3.Press the Menu/Ok button
4. Arrow down to "Copy"
5. Press the Menu/Ok button
6. To copy the photos from the internal memory to an SD card simply hit Menu/ok button again.
7. Arrow down to "All Frames" and then press Menu/Ok
8 It now asks you to confirm. To continue copying the pictures over, press Menu/Ok again.
9. It will now begin copying your pictures over.

There you go. Hope this helps!
11/28/2023 7:18:58 PM • Fuji FinePix... • Answered on Nov 28, 2023
1helpful
2answers

LCD for Canon Powershot G5

did you look at the ifixit.com website? Not sure they already did the G5, but you never know.
11/28/2023 7:18:56 PM • Cameras • Answered on Nov 28, 2023
0helpful
1answer

Kodak EasyShare C160. It is stuck in date and time reset mode.

It needs to go back to Kodak for firmware and software repair. https://www.google.com/search?q=Kodak+EasyShare+C160+stuck+in+date+and+time+reset+mode ..
11/28/2023 7:18:55 PM • Kodak Cameras • Answered on Nov 28, 2023
2helpful
2answers

I have a panasonic Lumix camera and it keeps

Hello and Welcome to FixYa!
There is a Lock switch on the left side of the SD card. Make sure the Lock switch is slid up (unlock position). You will not be able to modify or delete the contents on the memory card if it is locked.
You can see the snap attached below;
n00h_0.gif

If the lock switch is not on lock;
  • Slide the switch up and down. Repeat this 3 times.
  • Let it stay on the Lock position for 30 seconds.
  • Slide the switch up to unlock the card.
  • Try to transfer files into the device.

If none of the above works, then you card in either damaged (Format it) or is Password protected.

If you think I was of help, your token of appreciation in the form of rating and a testimonial will be esteemed.
Concerned, Nooh
11/28/2023 7:18:52 PM • Panasonic... • Answered on Nov 28, 2023
0helpful
1answer

My Tasco digital trail cam model 119223C wont power on. It always says OFF when I push the power button. I have replaced the SD card and fresh batteries with no luck. Can anyone help me out?

If your Tasco digital trail camera is not powering on and only displays "OFF" when you press the power button, despite replacing the batteries and SD card, there are a few additional troubleshooting steps you can take: 1. **Check Battery Orientation:** Ensure that the batteries are inserted correctly with the correct polarity. The camera won't power on if the batteries are inserted improperly. 2. **Battery Contacts and Compartment:** Inspect the battery compartment for any signs of corrosion or damage. Clean the battery contacts and the inside of the compartment using a clean, dry cloth or a cotton swab. 3. **Test with Known Good Batteries:** Sometimes, even new batteries can be defective. Try using a different set of known good batteries to eliminate the possibility of faulty power sources. 4. **External Power Source:** Some trail cameras can also be powered using an external power source or a compatible external battery pack. Check if your model supports this option and try using an external power source. 5. **Reset to Default Settings:** Look for a reset button or procedure in the camera's manual. Resetting the camera to its default settings might help if there's a software issue causing the problem. 6. **Check for Firmware Updates:** Check the manufacturer's website for any available firmware updates for your specific camera model. Updating the firmware can sometimes resolve software-related issues. 7. **Inspect for Physical Damage:** Carefully inspect the camera for any signs of physical damage or water ingress. Ensure that all compartments, seals, and openings are properly closed and sealed. 8. **Contact Tasco Support:** If none of the above steps resolves the issue, it's advisable to contact Tasco customer support or consult the camera's manual for specific troubleshooting steps. They may be able to provide additional guidance or recommend further actions. If your trail camera is still under warranty, consider reaching out to Tasco's customer support for assistance. If not, and the issue persists, you might need to consult with a professional camera repair service for a more in-depth diagnosis and potential repairs.
11/19/2023 9:02:45 PM • Cameras • Answered on Nov 19, 2023
0helpful
1answer

My c1550 will not turn all the way on sayings the battery is dead but I put new ones in

See troubleshooting section of user manual on page 38. It will help. User manual Kodak EasyShare C1550 (English - 63 pages)
11/19/2023 2:06:07 PM • Cameras • Answered on Nov 19, 2023
7helpful
2answers

Canon 600ex-rt speedlite won't turn on with new batteries

I was having exactly the same issue with my 600EX-RT. This is what solved the problem for me. With the power turned off. Hold down the 2 clear buttons for approximately 5 seconds, then turn the power on and hopefully, you should have a fully operational Flash.
11/18/2023 6:01:27 PM • Canon Speedlite... • Answered on Nov 18, 2023
1helpful
1answer

Kodak kiosk doesn't recognize jpegs

after copying images to a cd-r, when i went to eject the cd i was given the option to eject with drag-to-disk enabled or not. drag-to-disk was the default, so accepted that and clicked eject. but the kodak kiosk could not find my images.

so i went home and put the cd back in and chose not to enable drag-to-disk, then clicked eject. took it back to the kodak kiosk and voila my images appeared!
11/15/2023 6:28:55 AM • Cameras • Answered on Nov 15, 2023
0helpful
1answer

How to record using SAMSUNG DIGITAL CAMERA DV150F.

How to record Video? check out the manual

SMART CAMERA DV150F ' Samsung Support CA

Samsung https://www.samsung.com > ... > Camera > Compact SMART CAMERA DV150F. Solutions & Tips, Download Manual, Contact Us. Samsung Support CA. ..
11/14/2023 6:33:29 PM • Samsung Cameras • Answered on Nov 14, 2023
0helpful
1answer

Nikon Coolpix S570 won't focus in any mode on any object (near or far). No warranty. Is there a way to fix myself?

No unfortunately not. Camera repairs are very complex and require special tools. They are also repaired in a clean room with filtered air by men and women of full cover, coveralls. No fluff or specs on the sensors. Help here including a good answer on JustAnswer. https://www.google.com/search?q=Nikon+Coolpix+S570+won%27t+focus+in+any+mode+on+any+object ..
11/14/2023 6:33:17 PM • Nikon Cameras • Answered on Nov 14, 2023
0helpful
2answers

Olympus vr340 orange light blinks

When I put my camera on charge it shows Orange for 3 seconds then dies and makes sound for a 1 sec and nothing els
11/3/2023 2:00:49 PM • Olympus Vr-340... • Answered on Nov 03, 2023
0helpful
1answer

Is it possible to stamp date and time on pictures using a kodak cd82 camera?

To set the date and time on your camera, follow these steps: Turn on the camera and set the language and date/time by following the instructions in the Extended User Manual. Once you have set the date and time, you can turn on the Date Stamp feature by following the instructions in the User Manual . The date and time will be stamped on all pictures taken with this feature enabled. KODAK CD82 - EXTENDED GUIDE EXTENDED USER MANUAL Pdf Download ' ManualsLib KODAK EASYSHARE CD82 USER MANUAL Pdf Download ' ManualsLib
10/31/2023 4:01:28 AM • Kodak Cameras • Answered on Oct 31, 2023
14helpful
7answers

Memory stick error

This is a crazy fix but I can assure you it works, turn the camera off and hit it and then turn the camera back on, I had the problem and heard the fix and tried it as I had nothing to loose the camera was not working anyways an it fixed it error cleared.
You will laugh when it works.
10/30/2023 7:08:57 PM • Sony Cyber-Shot... • Answered on Oct 30, 2023
1helpful
1answer

My Eliminator Intelligent Battery Charger, now flashes 000 regardless of what battery I put it on. Can I reset it and get my charger working again?

you can try to reset your charger and get it working again: Check the battery voltage: Use a voltmeter to check the voltage of your battery. If it's below 3 volts, it may be too low for the charger to detect. In this case, you may need to use a different charger or replace the battery. Check the connections: Make sure that the battery terminals are clean and securely connected to the charger. Loose connections can cause voltage drops and prevent the charger from detecting the battery. Check the fuse: If your charger has a fuse, check if it's blown. A blown fuse can prevent the charger from working properly. Reset the charger: Unplug your charger from the power source and remove any connected batteries. Wait for 10 seconds and then plug it back in. This should reset your charger and clear any error codes. If none of these steps work, you may need to contact customer support
10/28/2023 6:38:43 AM • Next Cameras • Answered on Oct 28, 2023
0helpful
1answer

Error clock R49 error on Nikon D80

this error message is usually caused by a low battery. Here are some steps you can try to fix the issue: Remove the battery from your camera. Fully charge the battery using the Nikon D80 battery charger. Remove the memory card and reset the camera by using the reset option in the menu or by pressing the reset switch on the camera's body, under the connector cover . If the error persists, Nikon recommends waiting for one or two days before sending the camera in for inspection
10/28/2023 6:35:06 AM • Nikon Cameras • Answered on Oct 28, 2023
Not finding what you are looking for?
Cameras Logo

204,848 questions posted

Ask a Question

Usually answered in minutes!

Top Cameras Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

67454 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...