Computers & Internet - Page 7 - Recent Questions, Troubleshooting & Support

0helpful
2answers

I'm unable to play 3D games on my laptop dell

Wanna play games with no barrier in performance?? Check here my review on the best-ever game performer Dell Laptop. Dell Alienware 15 r4: https://www.cutpriceretail.com/blog/laptops/amazoncom/18328-dell-alienware-15-r4

190d54cd-be98-43c5-8cee-3074aff03b38.jpg
11/22/2022 4:45:58 PM • Dell Latitude... • Answered on Nov 22, 2022
0helpful
2answers

Out of frequency range set lower resolution

reboot the system by pressing F8 if your using windows OS and select last good configuration.

you can try also selecting Enable VGA mode (press F8 while rebooting and select ENABLE VGA mode).

hope this helps, please rate.
11/22/2022 4:45:51 PM • Compaq Computers... • Answered on Nov 22, 2022
0helpful
1answer

Hi, my sister gave me her old Panasonic CF-w5, however she can't remember her Log-in password and she don't have the original disk, please help thank you.

If you have forgotten your password for your Panasonic CF-w5 and don't have the original reset disk, don't despair. There are a few ways that you can reset your password and get back into your account. First, try using a live Linux CD or USB drive. Many live Linux distributions come with a utility called "chntpw" which can be used to reset passwords on Windows machines. Once you have booted into your live Linux environment, open a terminal window and enter the following command: sudo chntpw -u <username> /media/windows/SAM Replace <username> with the username of the account you want to reset the password for. Once the command has been executed, you will be prompted to enter a new password for the account. I hope this helps! Here is the link:http://www.chntpw.com/download/
11/22/2022 4:45:42 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
4answers

WD HARD DISK SERVICE CENTRE IN ABU DHABI

Do not waste your time on servicing hdd. They are dead technology. It costs far less to buy a new SSD than repair old smaller hdd. If you are trying to recover data, then try (1) Ensure (Redington) service centre http://www.redingtonmea.com/services/ensure-services or (2) icarefix - Data Recovery Service in Dubai Abu Dhabi UAE iCareFix
11/22/2022 4:45:30 PM • Hard Computers &... • Answered on Nov 22, 2022
0helpful
1answer

Panasonic KX-T7736 phone. 2 line system. 1 line is functioning correctly. the other line does not produce dial tone; when selected, I get a busy signal. This is not a new installation.

If you have a Panasonic KX-T7736 phone with one line not producing dial tone, there are a few possible causes. The first possibility is that the phone line itself is the problem. If you have another phone in the house, try plugging it into the same phone line and see if you get a dial tone. If you do, then the problem is with the KX-T7736 and not the phone line. The second possibility is that the problem is with the phone's internal wiring. To check this, unplug the phone from the wall jack and plug it into a different jack. If you get a dial tone, then the problem is with the first jack and not the phone. The third possibility is that the problem is with the phone itself. If you've tried the other two solutions and you still don't have a dial tone, then the problem is most likely with the KX-T7736 and you'll need to contact Panasonic for assistance. I hope this helps!
11/22/2022 4:45:19 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
4answers

Which is the top Digital Marketing Organization?

There are Lots of Digital Marketing Institute are Available in India. But Here I Share With You My Experience that How Can I Find the Best Institute For Digital Marketing Course? So I searched Many Times on Google About Best Digital Marketing Institute in Delhi and After the Result of SERP, I Was Going to Various Institutes But Non Anyone Satisfy me. But Some Days After My One Friend Akshay Suggest me to Join the Digital Edge Institute, Oh that the Best Time For me. Now I am a Digital Marketer Because of my Friend. So I Suggest You Choose the Digital Edge Institute that Will Definitely Change Your Future in Digital Marketing Field.
11/22/2022 4:45:15 PM • Computers &... • Answered on Nov 22, 2022
0helpful
1answer

When I am trying to open my Corel Word Perfect 8 I get a mesg G180.dell? How can I solve this problem?

There are a few things that could be causing this problem. One possibility is that your Word Perfect 8 installation is corrupt. You can try uninstalling and then reinstalling the program. Another possibility is that there is a conflict with another program on your computer. Try disabling or uninstalling any other programs that you have running. If that doesn't work, you may need to contact Corel's technical support for help.
11/22/2022 4:45:10 PM • Corel Computers... • Answered on Nov 22, 2022
0helpful
1answer

What should i do to fix this error? Canon i-sensys mf 9220 showing system error E000003 on screen

What is the Canon i-sensys mf 9220 system error E000003? The Canon i-sensys mf 9220 system error E000003 is an error that can occur when you're trying to print documents. Basically, it means that the printer can't communicate with the computer. This can be caused by a number of things, but the most common cause is a problem with the USB cable. How to fix the Canon i-sensys mf 9220 system error E000003? If you're getting this error, the first thing you should do is check the USB cable. Make sure that it's properly connected to both the printer and the computer. If the cable is loose or damaged, try replacing it with a new one. I hope this helps!
11/22/2022 4:44:33 PM • Canon Computers... • Answered on Nov 22, 2022
0helpful
1answer

I am using NTI Backup Now EZ 7 on Windows 10. Where is the 'overwrite old backups' option?

If you're using NTI Backup Now EZ 7 on Windows 10, you may be wondering where the 'overwrite old backups' option is. Here's a quick guide to help you find it. Open the NTI Backup Now EZ 7 application. Click on the 'Advanced Options' tab. Click on the 'Backup Options' button. In the 'Backup Options' window, select the 'General' tab. Under the 'Backup Options' heading, you will see the 'overwrite old backups' option. Select the 'overwrite old backups' option and then click 'OK' to save your changes. I hope this helps!
11/22/2022 4:44:25 PM • NTI Computers &... • Answered on Nov 22, 2022
0helpful
1answer

Toshiba PX1524E-1HKO, flashing blue/red light

If you're seeing a combined blue and red light on your Toshiba PX1524E-1HKO laptop's hard drive, it means that there is a problem with the drive and it isn't being recognized by the computer. This could be due to a number of issues, such as a loose connection, damaged data cables, or a failed hard drive. If you're hearing no sound coming from your hard drive, it's a pretty good indication that it isn't spinning. This could be due to a number of issues, such as a failed motor or a damaged data cable. If you're not sure what the problem is, the best course of action is to take the laptop to a qualified technician or computer repair shop to have them take a look at it. They'll be able to diagnose the problem and let you know what needs to be done to fix it. I hope this helps!
11/22/2022 4:44:16 PM • Toshiba... • Answered on Nov 22, 2022
0helpful
1answer

Another Quest. when scanning the scanner lights and gives options but isnt able to connect why?

There are a few things that could be causing your scanner to not connect, and we'll go through each of them so you can get back to scanning in no time. First, make sure that the scanner is turned on and that the batteries are not dead. If the scanner is plugged in, try unplugging it and then replugging it in. Sometimes the scanner just needs to be reset. Next, check that the scanner is properly paired with the device you're trying to use it with. If it's not, follow the pairing instructions that came with your scanner. If you're still having trouble, try restarting your device. This will usually fix any connection issues. If none of these solutions work, then there may be something wrong with the scanner itself and you'll need to contact the manufacturer for further troubleshooting. I hope this helps!
11/22/2022 4:44:07 PM • The Computers &... • Answered on Nov 22, 2022
0helpful
1answer

IC-R6 is scanning very slow. 1 frequency in 2 second, not 100 frequency in 1 second. Were is problem ?

There are a few things that can be done to try to fix the problem. One is to make sure that there is no interference from other electronic devices. Another is to try to use a stronger battery. I think you may need to move to a location where the signal is stronger. I hope this helps!
11/22/2022 4:42:36 PM • The Computers &... • Answered on Nov 22, 2022
0helpful
1answer

Solid black copies with no image at all.the drum has toner all around it black in appearance.scanning lamp turns on.what could be the cause

1. The Drum Has Toner All Around It Black In Appearance: This is usually caused by a dirty or damaged drum. To clean the drum, simply wipe it down with a damp cloth. If the drum is damaged, you will need to replace it. 2. Scanning Lamp Turns On: This is normal and indicates that the printer is ready to scan. 3. What Could Be The Cause?: There could be several causes for this, such as a dirty or damaged drum, a paper jam, or a problem with the fuser. To troubleshoot, simply check each of these things and see if the problem persists. I hope this helps!
11/22/2022 4:42:32 PM • The Computers &... • Answered on Nov 22, 2022
0helpful
1answer

I have a PANASONIC CF-RZ4 with supervisor password. Does anyone have fresh copy of BIOS.

What to do if you have a Panasonic CF-RZ4 with a supervisor password If you have forgotten your supervisor's password for your Panasonic CF-RZ4, you will need to reset it in order to gain access to the BIOS settings. In order to do this, you will need to have a fresh copy of the BIOS file for your CF-RZ4. You can usually find this on the manufacturer's website. Once you have the BIOS file, you will need to use a program like 7-Zip to extract the contents of the file. Inside the extracted folder, you will find a file called "bios.bin". This is the file you will need to use to reset your supervisor's password. To reset the password, you will need to boot into the BIOS settings. To do this, you will need to press the F2 key when the CF-RZ4 logo appears on the screen. I hope this helps!
11/22/2022 4:42:28 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

Can gl502vt cpu be upgraded for windows 11?

The answer is yes, the gl502vt CPU can be upgraded to windows 11. The process is relatively simple and can be completed in a few minutes. There are a few different ways to upgrade the gl502vt cpu for windows 11. The easiest way is to use a program like Driver Easy. This program will automatically detect your computer's hardware and then download and install the correct drivers for your new cpu. Another way to upgrade the gl502vt cpu is to do it manually. This is a more advanced method and is not recommended for beginners. If you are comfortable with computers and are confident in your ability to follow instructions, then you can try upgrading the cpu manually. Whichever method you choose, make sure to follow the instructions carefully and to back up your computer before proceeding. I hope this helps!
11/22/2022 4:42:22 PM • Computers &... • Answered on Nov 22, 2022
0helpful
1answer

My wifi is connected but no internet

If your wifi is connected but you're not able to access the internet, it's likely that there's an issue with your computer's network settings. The first thing you should do is check to see if your computer is connected to the internet. If it is, then the problem is likely with your wifi connection. If your computer is not connected to the internet, then the problem is likely with your computer's network setting
11/22/2022 4:42:17 PM • Internet... • Answered on Nov 22, 2022
0helpful
1answer

Saffire pro 10 not recognize by PC again

If your Saffire Pro 10 is not being recognized by your PC, there are a few things you can try to fix the problem. First, make sure that the Saffire Pro 10 is properly connected to your PC. If the connection is loose, try tightening it. If that doesn't work, try reconnecting the Saffire Pro 10 to a different USB port on your PC. If the Saffire Pro 10 is still not being recognized by your PC, you may need to update the drivers. To do this, go to the Focusrite website and download the latest drivers for the Saffire Pro 10. Once the drivers are installed, restart your PC and try connecting the Saffire Pro 10 again. I hope this helps!
11/22/2022 10:50:00 AM • Pro Computers &... • Answered on Nov 22, 2022
0helpful
1answer

Jsh digital safe i aquired an older model and cant get it to power up how do i power up this safe, does it take battaries

If you have an older model Jsh digital safe, you may need to power it up in order to use it. To do this, you will need to locate the power cord and plug it into an outlet. Once the safe is plugged in, you should see a green light on the control panel. If the safe does not power up, you may need to troubleshoot it. If your Jsh digital safe won't power up, the first thing you should do is check the power cord. Make sure that it is plugged into an outlet and that the outlet is working. If the cord is plugged in and the outlet is working, the next thing you should check is the control panel. Make sure that the power switch is in the ON position. If the power switch is in the OFF position, the safe will not power up. If the power cord is plugged in and the outlet is working, but the safe still won't power up, there may be a problem with the control panel. The control panel may be faulty or there may be a loose connection. To troubleshoot this problem, you will need to open up the control panel and check the connections. If you have checked the power cord, the outlet, and the control panel, and the safe still won't power up, there may be a problem with the battery. The battery may be dead or there may be a loose connection. To troubleshoot this problem, you will need to open up the control panel and check the connections. If you have checked the power cord, the outlet, the control panel, and the battery, and the safe still won't power up, there may be a problem with the safe itself. The safe may be damaged or there may be a loose connection. To troubleshoot this problem, you will need to contact a Jsh digital safe technician.
11/22/2022 10:47:31 AM • Power Up... • Answered on Nov 22, 2022
0helpful
1answer

Cant find panasonic nx vx77 movie camera record button

The record button on your Panasonic NX VX77 movie camera is likely located on the top of the camera, near the shutter button. If you can't find it there, try looking on the back of the camera, near the LCD screen. The built-in microphone is likely located on the top of the camera, near the record button I hope this helps.
11/22/2022 10:41:58 AM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

How to make touch screen on gateway computer upside down and how to put it back?

f you want to use your touch screen on your gateway computer in an upside down orientation, there are a few things you need to do. First, you need to change the orientation of the screen in the control panel. To do this, go to the control panel and select "Display." Next, click on the "Settings" tab and then click on the "Orientation" drop-down menu. Select "Landscape (flipped)" from the menu and then click on the "Apply" button. Now that the orientation of the screen has been changed, you need to adjust the position of the touchscreen so that it is in the correct position. To do this, go to the control panel and select "Hardware and Sound." Next, select "Pen and Touch" and then click on the "Calibrate" button. Follow the on-screen instructions to calibrate the touchscreen. Once you have finished, the touchscreen should be working correctly in the upside down orientation. I hope this helps!
11/22/2022 10:33:09 AM • Gateway... • Answered on Nov 22, 2022
Not finding what you are looking for?
Computers & Internet Logo

1,481,664 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19163 Answers

Cindy Wells

Level 3 Expert

6554 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...