Computers & Internet - Page 6 - Recent Questions, Troubleshooting & Support

0helpful
2answers

Howo back up iphone on acer laptop

Besides iTunes, you can also back up iPhone files with 3rd party tools. iTransfer is helpful on this issue. This software is used for transferring files among iOS devices, iTunes and computers, and it will help users to back up iPhone music, videos and so on to computer easily. 1. Run iTransfer and connect iPhone to computer with the USB cable. Click the name of iPhone and choose files you want to backup in the left sidebar. Then contents will show up in the right part. howo-back-up-iphone-acer-laptop-oxaxc0rwhkhzilrwacqreyis-1-0.png 2. Press "Ctrl" and click to choose certain files, then click the transfer button in the right bottom of the interface to back up the files. Or right-click the files you want to backup, and choose to "Transfer to > My Computer". howo-back-up-iphone-acer-laptop-oxaxc0rwhkhzilrwacqreyis-1-2.png 3. In the dialog of transfer settings, choose the location on the computer to put the iPhone backups. Check "Save to Folder" and click "Change" to choose the target folder. If users want to backup the files to iTunes as well, check the "Save to List" and choose "iTunes". Click "Transfer Now" to start the iPhone backup. howo-back-up-iphone-acer-laptop-oxaxc0rwhkhzilrwacqreyis-1-5.png http://www.leawo.org/tutorial/how-to-backup-locked-iphone.html
9/18/2021 12:15:40 PM • Acer Computers &... • Answered on Sep 18, 2021
0helpful
1answer

Can't install base on acer monitor

I, too, struggled with the same issue; however, after a fairly exhaustive search of the Internet, I came across a review that provided the answer: Attach the base to the monitor as you have been doing, but this time, place both base and monitor on the floor--while the base is still flimsily attached to the monitor--and then push down on the monitor. It will secure itself in place. It may seem like you are going to break it, but you won't. It requires little pressure--far, far less than the way we have heretofore been trying to push or jam the base into the monitor. Again, the key is to place the base and monitor (upright position) on the floor, and gently but forcefully push down on the monitor, using both hands, one astride each corner of the monitor.
9/18/2021 12:13:01 PM • Acer Computers &... • Answered on Sep 18, 2021
0helpful
1answer

I upgraded win7 to win 10 on my pav70 netbook (Acer eMachines EM355-131G25ikk DDR3-SDRAM Netbook)

Try connecting an external monitor. Maybe driver problem.
9/18/2021 12:01:27 PM • Acer Computers &... • Answered on Sep 18, 2021
0helpful
1answer

My shhors resist SH759 watch

Make of computer may help you get an answer.
9/18/2021 11:59:51 AM • Time Computers &... • Answered on Sep 18, 2021
0helpful
1answer

How do I make a payment?

With cash or card
9/18/2021 11:46:14 AM • Computers &... • Answered on Sep 18, 2021
0helpful
2answers

How do I get my laptop to play dvds again it won t work

When you say play DVDs you mean watch DVD movies? Assuming the drive is not broken you need to use the DVD app. You could use VLC Player which you can download. It's an orange traffic cone icon.
9/18/2021 11:29:44 AM • Acer TravelMate... • Answered on Sep 18, 2021
0helpful
5answers

How to Add Subtitles to a Movie/Video on VLC?

1. Kick off VLC media player on your computer and then click on the menu button of "Media" in the top toolbar. 2. Choose the option of "Open File..." to hit on to choose the video file on your computer local folder. 3. When the video file is opened by VLC, you can right-click on anywhere to bring out a panel. Hit on "Subtitle> Open File..." successively to locate the subtitle file that you want to add to the video. Thus, you can watch the video with the specific subtitle at ease with VLC media player. For more methods, check: How to Add Subtitles to a Movie vlc-media-player-choose-subtitle-12-tvomksqivsqx1dq21ffr3i2x-2-0_4.jpg
9/18/2021 10:16:22 AM • Computers &... • Answered on Sep 18, 2021
0helpful
1answer

Pic quality

Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.
Using Latest Software:
Finally, make sure you are using the latest release of Logitech camera software. You can download the latest release from the Logitech Downloads + Parts page.
9/18/2021 3:18:09 AM • Logitech Webcam • Answered on Sep 18, 2021
0helpful
1answer

Image quality

Hi,

Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens.

This will allow you to focus the camera image on objects at different distances.

Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.

Connection Issues:

If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video.

Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed.

Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds.

If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.

Changing Display Adapter Settings:

If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter.

For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher.

To change the color palette please perform the following steps:

Click on "Start," "Settings," and "Control Panel."

Double-click on the Display icon.

Click on the tab labeled Settings.

In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).

Also, check with the manufacturer of the video card for updated video drivers.

Low Light Boost:

If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost."

If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software.

To do this:

Open the QuickCam software.

At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.

Choose "Advanced Camera Settings".

Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.

If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.

Click OK when your are done.

Last, make sure that you ae using the latest drivers.

You can upodate them from here.

http://www.logitech.com/index.cfm/492/&cl=us,en?prodcrid=492

Hope this helps.

Good Luck.

Live, Love, Laugh.
9/18/2021 3:07:02 AM • Logitech... • Answered on Sep 18, 2021
0helpful
2answers

Can't play certain .avi files on quicktime

We do have issues playing .avi files which have been compressed using CODECs that are unavailable for QuickTime in MAC OSX. Here is what you can do... http://www.thexlab.com/faqs/avidivx.html Revert back if this doesn't work.
9/18/2021 3:01:09 AM • Apple QuickTime... • Answered on Sep 18, 2021
0helpful
5answers

I cant watch an avi file on my laptop which is a

Yes, you can. Download and install the app VLC from www.videolan.org , open it and use to play the avi video file.
7_14_2019_2_16_49_pm.jpeg
9/18/2021 2:59:08 AM • Apple QuickTime... • Answered on Sep 18, 2021
0helpful
2answers

HOW DO i TAKE A SELFIE

Point the camera at you and take a picture.
9/18/2021 2:47:22 AM • Sony Ericsson... • Answered on Sep 18, 2021
0helpful
1answer

The steps I should do for forgetting passwords when I use switches?

This needs to be discussed in different situations, you can check whether these situations can solve your current problem. Scenario 1: All Default Passwords Are Changed and All Passwords Are Forgotten If you change all default passwords and forget the console port login password, all STelnet/Telnet login accounts and passwords, and BootROM/BootLoad passwords: ·For a switch that has the PNP button, you can press and hold the PNP button for more than 6 seconds to restore the switch to factory settings and restart the switch. The following figure shows the PNP button. ·If the switch does not have the PNP button, return it to the factory for repair. Scenario 2: Default Passwords Are Forgotten For S series switches running V200R020 and later versions, no passwords are configured for default accounts, and users must configure new passwords for logging in to the switches. In this situation, scenario 2 is not involved. However, for S series switches running versions earlier than V200R020, there is no default STelnet/Telnet login password, but there are default console port login password, default BootROM/BootLoad password, and default web login password. These default passwords may vary according to the switch version. If you always use the default passwords and have not changed the passwords, you can obtain the default accounts and passwords according to S Series Switches Default Usernames and Passwords (for enterprise users or carrier users). The permission level of this document is C (customer support level). If you need to upgrade the permission level, see the help document on the website. Scenario 3: The Console Port Login Password Is Forgotten Three methods are available to recover the console port login password. ·Method 1: Log in to the device using STelnet or Telnet and change the console port login password. ·Method 2: Clear the console port login password in the BootROM/BootLoad menu and change the console port login password. Scenario 4: The STelnet/Telnet Login Password Is Forgotten ·If you forget the login password of an STelnet/Telnet account, you can use another STelnet/Telnet account with administrator rights to log in to the device and reset the password. For details, see Method 1. ·If you forget the passwords of all STelnet/Telnet accounts but can log in to the device through the console port, see Method 2.

Method 1: Use an STelnet/Telnet Account with Administrator Rights to Log In to the Device and Reset the Password

1.Log in to the switch using the STelnet/Telnet account with administrator rights. 2.Change the STelnet/Telnet login password. The following example describes how to change the STelnet/Telnet login password of VTY0 to VTY4.

Method 2: Log In to the Device Through the Console Port and Set a New STelnet/Telnet Login Password

If you forget the STelnet/Telnet login password but remember the console port login password, log in to the switch through the console port and set a new STelnet/Telnet login password. Scenario 5: The BootROM/BootLoad Password Is Forgotten but the Console Port/STelnet/Telnet Login Is Available If you can log in to the switch through the console port, STelnet, or Telnet, log in to the switch and restore the default BootROM/BootLoad password. You can obtain the default accounts and passwords according to S Series Switches Default Usernames and Passwords (for enterprise users or carrier users). The permission level of this document is C (customer support level). If you need to upgrade the permission level, see the help document on the website. Scenario 6: The Web Login Password Is Forgotten but the Console Port/STelnet/Telnet Login Is Available If you can log in to the switch through the console port, STelnet, or Telnet, log in to the switch and reset the web login password. In the following example, the web login user name is admin123 and the password is [email protected]. For more reference resources, please click to enter (ebook) CloudCampus 3.0 Solution: https://support.huawei.com/enterprise/en/doc/EDOC1100201111 OR you can straight to see this decument https://support.huawei.com/enterprise/en/doc/EDOC1100200698#section1612361212554
9/18/2021 2:45:38 AM • The Computers &... • Answered on Sep 18, 2021
0helpful
1answer

How can I recover HUAWEI switch when the STelnet/Telnet login password is forgotten?

If you forget the login password of an STelnet/Telnet account, you can use another STelnet/Telnet account with administrator rights to log in to the device and reset the password. For details, see Method 1. If you forget the passwords of all STelnet/Telnet accounts but can log in to the device through the console port, see Method 2.

Method 1: Use an STelnet/Telnet Account with Administrator Rights to Log In to the Device and Reset the Password

1.Log in to the switch using the STelnet/Telnet account with administrator rights. 2.Change the STelnet/Telnet login password. The following example describes how to change the STelnet/Telnet login password of VTY0 to VTY4.

Method 2: Log In to the Device Through the Console Port and Set a New STelnet/Telnet Login Password

1. If you forget the STelnet/Telnet login password but remember the console port login password, log in to the switch through the console port and set a new STelnet/Telnet login password. Connect the PC to the switch through the console port on the switch. Connect the DB9 female connector of the console cable to the COM port on the PC, and connect the RJ45 connector to the console port on the switch 2. Start the terminal emulation software on the PC. Create a connection, select the connection port, and set communication parameters 3. Click Connect. Enter or configure the login password as prompted to log in to the switch through the console port. 4. Change the STelnet/Telnet login password. For details, see Step 2 in Method 1. This answer has a reference in here. https://support.huawei.com/enterprise/en/doc/EDOC1100200698#section1612361212554
9/18/2021 2:24:54 AM • Huawei Computers... • Answered on Sep 18, 2021
0helpful
3answers

Dvd player can't play blue ray disk

If you have an earlier model Compaq, it most likely a DVD ROM player. Check the printing on the drive tray, if it says DVD ROM then it cannot play Blu ray disks.
9/18/2021 2:12:54 AM • Compaq Presario... • Answered on Sep 18, 2021
0helpful
7answers

Syncmaster paower button blinking and no display

First of all plug another monitor to the VC on your PC and do the same for the SamSung"I over heat"SyncMaster2 053BW.
Oct 23, 2009 - This is how it went for me..I have a Samsung SYNCMASTER2.gif 2053BW. I leave my monitor on and let it hybernate when I shut down PC. I'm 3 months outside of my warranty. Two weeks ago something started happening. I boot PC and video doesn't come up for 10 minutes, and when it came up it worked perfect. VC/Monitor/MB?? It became 20 minutes and ...now..I have the analog/digital box in top left screen, power light on monitor flashing, no menu available on monitor and none of the other buttons work for anything. I test the monitor on Laptop..nothing(same as above)..I break out the old(working) monitor from deep within the closet. Plug it in and I'm up and running. So...

HOW TO OPEN A SYNCMASTER 2053BW

NO SCREWS!!! Assuming that the stand mount has been pulled out..The seam around the screen frame is where you start. The frame has the prongs, the back cover has what the prongs slip over.The frame is coming off first! I got the side to open by finger, then used a small standard screwdriver to pry ever so gently(lifting frame from rearcover). Leave the power button assembly on the frame, pull wire only a little to relax any tension..you get about 3/4" in extra taped to panel. The hard part is done.;) Still holding the frame...Now lift the panel (where the power button assembly wiring goes under panel) with the power housing that is under it as a whole and you will see where the powerbuttonassemble detaches.Remove frame. Now..holding edges of panel into back cover, lift and flip the whole thing over and place panel face down on a perfectly flat surface..a towel on my desk works. Lift and remove back cover.Your now looking at the back of the board housing. The ribon is simple, on the panel end of the ribon, squeez the outer clips together and slide it away against the panel..The secondary tin plate is removable, two clips super close to where the sets of wires come around the housing and into the panel.Unhook the 4 plugs(pink inside/blue outside)...Now lift the power housing off of the panel. The big board has the power. One screw to remove a ground plate first. Two screws to remove power board. Pics from phone.56ec44b.jpg
aae8fab.jpg
Reassemble but DO NOT re-snap the frame into place....yet... Test it! There is a reason the caps got hot in the first place, therfore it has a good chance of happening again. This is not fullproof...but.....mine has been on now for close to 6 hours with no glitches whatsoever. So I have resnapped mine back together. I hope you can too. - I must also add that this is one of the best producing monitors I have ever seen...in 60hz. The clarity is top notch. If you purchase one get the extended warranty. FYI...I paid $4.00 for those caps.
9/18/2021 2:03:02 AM • Samsung... • Answered on Sep 18, 2021
0helpful
2answers

How to delete console port and telnet passwords through BootROM?

1. Connect a PC to the device with a serial cable and log in to the device through the console port. 2. Restart the device. When the message "Press Ctrl+B to break auto startup ..." is displayed, press Ctrl+B and enter the password to display the BootROM main menu. 3. Select choice 4 to enter the Startup Select menu. 4. Select choice 1 to view the system configuration. In V200R001C01SPC300 and later versions, you can use the following method to view the configuration file. In Huawei V200R001C01SPC300, the menu choice is Startup Information. In Startup Information and later versions, the menu choice is Display Startup. Startup Select 1. Display Startup 2. Set Boot File 3. Set Config File 4. Startupfile Check Manage 0. return Enter your choice (0-4):1 ************** Current Stratup info **************** Valid Flag State : Vaild Boot File Name : sd1:/software.cc Config File Name : sd1:/vrpcfg.cfg Licence File Name : Patch State : Deactivate Patch File Name : Voice File Name : In V200R001C01SPC200 and earlier versions, the configuration file cannot be viewed. The system often uses the file vrpcfg.zip or iascfg.zip. 5. Rename the configuration file. 6. Restart RouterA. 7. Stop Auto-Config. 8. Change the renamed configuration file to executable file. Select one file format. 9. Restore the configuration.
9/18/2021 2:01:39 AM • Computers &... • Answered on Sep 18, 2021
0helpful
1answer

05,starex 2.5 crdi leaking at oil galley plug. How do you remove this plug. I've tried with Allen wrench but it won't budge.

Paul, I replied to this yesterday. Read this and please don't make posts like this again. It just does not work, you are wasting your time and not helping yourself! Click on this link and read my reply. https://www.fixya.com/cars/t29839554-thank_mr_ken_green_allen_wrench_plug ..
9/17/2021 11:56:05 PM • Computers &... • Answered on Sep 17, 2021
0helpful
1answer
Not finding what you are looking for?
Computers & Internet Logo

1,487,381 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Brad Brown

Level 3 Expert

18803 Answers

Cindy Wells

Level 3 Expert

6356 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...