Car Audio & Video - Popular Questions, Answers, Tips & Manuals
Lost code for car radio Becker Indianapolis pro. Could you tell me the code if possible?
I don't have access to the security codes for car radios, including Becker Indianapolis Pro. These codes are usually unique to each device and are intended to prevent unauthorized access to the radio.
However, you may be able to retrieve the code for your Becker Indianapolis Pro by contacting the manufacturer or a local car dealership. They may require proof of ownership, such as the car's registration or your identification, to verify that you're the rightful owner of the radio.
Alternatively, you can also try searching for the code using the radio's serial number on online radio code databases or forums. However, please note that these methods are not always reliable, and you should exercise caution when using them.
Laney Pro Tube 100 watt guitar amp can't find schematics not an AOR
Sorry to hear about the lightning strike and the issues you're having with your Laney Pro Tube 100 watt guitar amp.
Based on your description, it sounds like there may be an issue with the power section of the amplifier, possibly a short circuit or damaged components that are causing the fuse to blow when the standby is turned off.
Unfortunately, without access to the schematic, it can be difficult to diagnose the specific issue. However, there are a few general troubleshooting steps you can try:
- Check the power tubes: Make sure the power tubes are properly installed and functioning. A faulty power tube can cause the amp to draw too much current and blow the fuse.
- Check the rectifier tube: If the amp uses a tube rectifier, make sure it is functioning properly. A bad rectifier tube can cause the power supply to malfunction and blow the fuse.
- Inspect the wiring: Check for any damaged or frayed wiring that could be causing a short circuit. Look for any burnt or melted components, particularly around the power supply section.
- Check the bias: If the amp has an adjustable bias, make sure it is set correctly. An incorrect bias can cause excessive current draw and blow the fuse.
If you are not comfortable performing these steps yourself or if they do not solve the issue, I would recommend taking the amp to a qualified technician for repair. They should be able to diagnose and fix the problem, even without the schematic.
If you are still looking for the schematic, you could try contacting Laney's customer support or checking online forums and user groups for similar amps to see if anyone has a copy.
We have car audio that requires code, do you know the options how to unlock it?
If your car audio system requires a code to unlock it, there are a few options you can try:
Check the user manual: The user manual for your car audio system may contain information on how to unlock it if a code is required. Look for a section on "security" or "anti-theft" features.
Contact the manufacturer: If you don't have the user manual or can't find the information you need, you can try contacting the manufacturer of the car audio system. They may be able to provide you with the code or instructions on how to unlock it.
Try common codes: Some car audio systems use a default code, such as 0000 or 1234. Try entering these codes to see if they work.
Reset the system: If none of the above options work, you may need to reset the car audio system. This will erase any saved settings and data, including the code. The process for resetting the system will vary depending on the make and model of your car and audio system. Check the user manual or contact the manufacturer for instructions.
Kicker IQ 1000.5 amplifier in protect mode due to overvoltage any help
When an amplifier like the Kicker IQ 1000.5 goes into protect mode due to overvoltage, it is a safety feature to prevent damage to the amplifier or connected speakers. Here are some steps you can take to troubleshoot the issue:
- Check the power source: Make sure the amplifier is getting the correct voltage from the power source. The Kicker IQ 1000.5 amplifier requires a 12-volt power supply with a recommended amperage of 80A.
- Check the wiring: Check the wiring between the amplifier and the power source, as well as the wiring to the speakers. Make sure there are no loose connections or damaged wires.
- Check the amplifier settings: Make sure the amplifier settings are correctly configured, including gain, crossover, and subsonic filter. Ensure that the amplifier is not being overdriven by the source unit.
- Let the amplifier cool down: Turn off the amplifier and allow it to cool down if it has been running for an extended period.
If none of these steps resolve the issue, it is best to consult a professional installer or contact Kicker technical support for further assistance.
Best and correct way to wire speakers to amp
Power up the ampwith no speaker connected. If it goes into protect mode, the amp has been damaged.
If it is OK, check your user manual for wiring instructions, loading etc.
Do not allow the speaker wires to touch the car chassis/metalwork!
How can I download the English version for Pioneer Carrozzeria MRZ99 please?
Japanese only on this model.
How do I change the language on my Pioneer carrozzeria?
Question : I have a carrozzeria AVIC-****. Can I switch the language to English ?
Answer : Carrozzeria AVIC-**** is car navigation & AV model designed and sold for Japanese market only. The language cannot be changed to English, French or any other languages, and the instruction manual is in Japanese only.
..
Working on a Rock-Ola 488 Jukebox. Looking for a block diagram of power distribution
Unfortunately, I do not have access to specific diagrams for the Rock-Ola 488 Jukebox. However, a typical power distribution block diagram would show the power source, such as the power supply, and the different branches of distribution to various components. These could include the amplifier, control circuits, motors, and lighting.
In your case, since you only have the power supply and power amp, you could start by tracing the power wires from the power supply and identifying which wires connect to the power amp. Then, you can look for any other components in the jukebox that require power and trace their wiring to the power distribution network. This should give you a general idea of how power is distributed throughout the jukebox.
Need color code wire diagram for a 2003 Nissan Pathfinder SE with Bose premium sound system please?
Get yourself a digital multimeter. Find the +12V constant, 12V remote, and ground. Connect them to the new head unit. For speaker wire get yourself a 9V toy battery and listen to poping noise. If you have a factory amp you need to power up the factory amp. Use the wiring diagram below to serve as a guide. Test your wire first before connecting them.
NISSAN P o w e r Memory (+12v Constant) Red Ignition (+12v Switched) (varies) Brown or Green Ground (-) Black (varies - most don't have one) Illumination RED / White Dimmer RED / Black Power Antenna Green S p e a k e r s Right Front (+) Brown Right Front (-) BROWN / White Left Front (+) Black Left Front (-) BLACK/ White Right Rear (+) Blue Right Rear (-) Pink Left Rear (+) Red Left Rear (-) Green
Found here
https://www.google.com/search?q=2003+nissan+pathfinder+se+radio+wiring+diagram
..
Not finding what you are looking for?
Couldn't find circuit diagram but this might help.
