Brookstone Audio Players & Recorders - Popular Questions, Answers, Tips & Manuals

The beeping sound could be due to a hardware issue such as low battery or the speaker being in pairing mode1. Here are some steps you can try to resolve the issue: Check if the speaker is in pairing mode. If it is, try pressing the power button briefly (for 1 second), once or twice. This should cancel pairing mode and make the beeping stop. If the speaker is beeping every 30 seconds or so, it's probably telling you that it's in "Pairing Mode" and ready to connect to a Bluetooth device. If you don't have any devices to pair it with right now, just press and hold down the "Power" button for about two seconds to turn it off until you're ready to pair it again. If the problem persists, try restarting your device and then reconnecting it with the Bluetooth speaker. If the problem is still not resolved, then you should turn off the Bluetooth feature on your device. It will stop making those annoying sounds.

Hello Mr. Abramowitz This one https://manuals.brookstone.com/306612p_manual.pdf or this one https://manuals.brookstone.com/725793p_manual.pdf As it says 'Connected', I wonder if there is a Mute button on the headphones or on the television, or that you have volume on either device set to Zero? That would leave you connected but not hearing sound. Or you can go into the television settings and remove the entry for the headphones and re-pair the headphones to it. https://www.google.com/search?q=Brookstone+Whisper+NX+BSNCH101+manual ..

There are a few potential reasons why your Brookstone outdoor wireless speaker may not be working on battery power. Here are a few things you can try:

1. Make sure the battery is fully charged. If the battery is not fully charged, it may not be able to power the speaker.
2. Check the battery connections. Make sure the battery is properly seated in the speaker and that the connections are clean and secure.
3. Try a different battery. It's possible that the battery you are using is faulty or has simply reached the end of its lifespan.
4. Check for any visible damage to the speaker or battery. If you see any signs of physical damage, this could be the cause of the issue.
5. Contact Brookstone for further assistance. If you have tried all of the above steps and the speaker is still not working on battery power, you may need to contact the manufacturer for further assistance.

I hope this helps! Let me know if you have any other questions.

Try this Setting the 12/24 time format The 12 hour format is set as the default. To change the 12/24 hour time format, open the CONTROL COMPARTMENT COVER on the bottom of the clock and adjust the 12/24 TIME FORMAT switch to the desired format. Close the CONTROL COMPARTMENT COVER.

If it is the cables on the left of the image and enlarged in a later image, I would guess it connects the Bass Sub to the CD unit. https://www.ebay.com/itm/164776264603 Another cable for sale https://picclick.com/Replacement-Brookstone-Wafer-Thin-CD-System-9-pin-Cable-373183015603.html no manual available, not even from Brookstone. https://www.google.com/search?q=brookstone+acousti+clear+3cd+manual You could contact them https://www.brookstone.com/pages/manuals ..

Probably dirty laser optics, especially the tracking optic. Go to Walmart or Amazon and get a CD cleaner disc. It has small brushes that clean off dust.https://www.staples.ca/products/786397-en-staples-cd-dvd-drive-cleaner..

From set up manual Setting up the system takes no time at all. Connect the subwoofer to the main unit with the provided cable. The NXT speakers connect directly to the subwoofer with color-coded cables for left and right. An FM antenna is included and can be connected easily to the rear of the unit (the AM antenna is built in.) Finally, the subwoofer gets plugged into the wall for AC power and the unit can be powered up. If this takes you more than 5 minutes, call your Dad and ask for help, you're probably over-thinking it. There is no setup in terms of volume or bass management configuration as the sub handles all crossover functions as well as volume balancing between itself and the NXT speakers. You can get a copy from manufacturer or online search

Replace the SMD switches on the daughter board is what I would do.

find a manual

Hi Gina, your Brookstone, I could have a power supply problem, consult a specialized technical service Regards Franco Dosil Hola Gina, tu Brookstone, podria tener un problema de fuente de alimentacion, consulta en eun servicio tecnico especializado Saludos Franco Dosil

check with manufacturer for repair facilities / parts or an online search for electronic repair shops or parts

Possibly this is it: https://www.manualslib.com/manual/266412/Brookstone-Micro-Cd-System.html Brookstone micro cd system User Manual

Sorry but no.

Yes they can. I have done a guide for headphone replacement plugs etc on my Blog Site. If you can use a soldering iron or someone you know does, then you should have no problems. Real Life And Real Charts

You might be best just searching e-bay for headphone earpads. Then looking out for something that looks like yours. Most of these none standard headphone companies will tend to be made by other companies such as JVC or Sony. So just search for what they are, not who makes them.

try cleaning lens --then either an electronics repair shop their still around in 2016 or try manufacturer site for assistance

If that unit has batteries, when you press the connector to the valve on the tire, it should come on and show the pressure.

Check your mobile device or laptop. The volume might be low there.

Selecting 12- or 24- Hour Mode While in the Time screen, press or to select either 12- or 24-hour mode. If 12-hour mode is selected, PM displays for the afternoon/evening hours. AM does not display for the morning hours http://origin-www.brookstone.com/webassets/pdf/740687p_manual.pdf

sounds like a dead laser