Braun Logo

Braun Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 535 Products
  • 5K Answers
  • 362K Views

Mr Google suggests:

  1. Braun Service Centre Directions
  2. Appliance Repair Service
  3. Address: 3, 1St Floor, Navjivan Society, Lamington Road, Mumbai, Maharashtra 400008, India Phone:+91 22 2305 1554
  4. Write a review

Braun Health &... | Answered on Jul 15, 2020


Contact Braun directly to inquire.

Braun Health &... | Answered on Jul 13, 2020


1. Insert a flat head screw driver (FHSD) on the opening shown on picture. 2. While pushing down, move the FHSD towards LOT (right at this angle) as you pull towards you. The goal is to have an opening at the arch. 3. Insert another FHSD (or hard plastic if you don't want to mar) at the arch if it doesn't open. The battery orientation signs are shown on the back of the battery cover. I hope this helps. Keep fixing!

braun thermoscan hm3_page_1-undefined-undefined-0.jpg

braun thermoscan hm3_page_2-undefined-undefined-2.jpg

braun thermoscan hm3_page_3-undefined-undefined-5_0.jpg

Braun Health &... | Answered on Jun 19, 2020


The oddball Mercedes Benz emblem screw heads can be removed by a tamperproof bit. I bought a kit with various versions of these, and by filing the tip to a basic Phillips-like point, the screws came out.
There are 2; 1 under the little corner flap, the other under the pry-off green knob.
Then the top assembly gives access to the switches regarding low, high and pulse.

Braun Food... | Answered on Jun 09, 2020


NEEDS NEW BATTERIES

Braun Silk-epil... | Answered on Jun 02, 2020


The whole front square face of the clock has 4 little nails which are located in the middle of each side (inside and next to the edge of the joint), so you have to carefully insert a screwdriver and lever the front out. After this you have to remove the hands (remember to set the clock and alarm hand to 12:00 before taking those away). The face will be loose, and you'll have access to the mechanism. Clean the alarm contact (look for a double silver metal arm that touches an small bronze stick. Alarm button can be release by gently lever the little nail that shows in the center when button is up at clock's backside.
Cheers from Argentina

Braun Ab1a Alarm... | Answered on May 30, 2020


https://www.cnet.com/forums/discussions/samsung-smart-tv-turning-off-609897/

Braun Health &... | Answered on Mar 09, 2020


The basic method is:
  1. Dismantle handle.
  2. Desolder old battery and other connections from PCB.
  3. Remove charging coil, pressure warning light, pressure switch, PCB and battery.
  4. Replace battery.
  5. Reassemble PCB and other parts.
  6. Solder in connections for parts and new battery.
  7. Reassemble handle.
https://toothbrushbattery.com/guides/braun-oral-b-professional-care-1000-battery-replacement/

Braun Health &... | Answered on Mar 08, 2020


My Braun worked fine the last time I used it & would not come on when I tried it today. Worked on it & found it to be jammed with hair. Would not rotate. Scrubbed it with a toothbrush, started digging out the hair, forced it to rotate, scrubbed it some more, & rotated it some more. The more I worked with it the more hair kept coming out. It's rotating fine now. I think I'm going to clean it with my water pik. My Braun is the kind that can be used with water & the top part comes off. Haven't used it yet but I think I have fixed it. Wish I could get it apart to clean it out but the head of the screw is strange & I don't have anything that will turn it.

Braun 5270... | Answered on Feb 19, 2020


Hello, Unfortunately, E01 is an error meaning a problem with a component internally that is not repairable. Please contact the customer service team for further .

Braun Health &... | Answered on Jan 31, 2020


Buzzing means that the motor is energized, but something is jamming the grinder gears. The could be something metal, or it could be that the bearings are dry and seized. You need to strip it to find out.

https://www.google.com/search?q=Braun+KSM2+grinder

Braun Coffee... | Answered on Jan 27, 2020


The drive unit is probably not seated correctly. It must be pushed down when reassembling in order to keep the motor contacts in the correct position until the case is secured

Braun Health &... | Answered on Jan 27, 2020


I need this lid! If you ever have no need for your grinder, I'd love the lid :)

Braun KSM 2... | Answered on Jan 15, 2020


Google (braun)(4169)(manual) without parens OR contact Braun directly to request.

Braun Blenders | Answered on Dec 28, 2019


It looks like a horn it is actually a picture of the thin plastic cover that goes over the end before you put it inside the ear. Put the cover on and it will work.

Braun IRT3020... | Answered on Dec 01, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Braun Experts

Brad Brown

Level 3 Expert

18397 Answers

Tom Chichester

Level 3 Expert

55940 Answers

ray gallant

Level 3 Expert

68537 Answers

Are you a Braun Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...