Bosch Televison & Video - Answered Questions & Fixed Issues

If you have checked the fuse and bridge and they appear to be fine, there may be an issue with the charging circuit or the battery. Here are a few things you can try: Check the battery contacts: Make sure the contacts on both the battery and charger are clean and free of debris. Use a clean, dry cloth to wipe them down if necessary. Try a different battery: If you have another battery of the same type, try using it with the charger to see if the problem is with the battery or the charger. Check the charging circuit: Use a multimeter to test the voltage at the output of the charging circuit. If there is no voltage, there may be an issue with the charging circuit itself. Check the thermal fuse: The charger may have a thermal fuse that can blow if it overheats. Use a multimeter to test for continuity across the thermal fuse. If there is no continuity, the thermal fuse may need to be replaced. If none of these solutions work, it may be best to take the charger to a professional for repair or replacement.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/ https://elektrotricks.blogspot.com/ Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty. Search the sites by type in the brand name to your set, in its search box on the right column. View it on a desktop or in web View. Mobile view has no search box.

Try posting this in the laundry section and you may have better luck getting an answer, this is for TV's and video

Google for it or go to this website which often has appliance schematics Search Over 2 1 Million Appliance Parts

http://elektrotricks.blogspot.com/ http://electrotechnician.blogspot.com/ http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ Please visit these sites to get some details.

http://electrotechnician.blogspot.com/ https://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ Please visit these sites to get some details.

http://ecx.images-amazon.com/images/I/21b-Ru01zNL._AA160_.jpg There are a number of converters that convert 220v to 120 v and visa versa. If you do a web search " 220 to 120 converter, you'll get many sites.

thats a tough one bro, after doing some searching i was able to find this place, they may have what you need. Nuts & Bolts & Screws

What is the problem ?

000000 (six zeros)

Before you get advice from friends have the fault codes read to find which sensor has a problem. It will save money in the long run because you will not be fixing good parts.

if you have short, maybe your have a IC amp short inside. You must go to the repair shop for fix it. The speaker you can test in another system. God bless you

The blower should be located under the kick plate on the passenger side by your feet.

replace the RAM where the password stored.......

conert to another format

Connect a monitor directly to the Divar video out (mon A).
Turn on Advanced menus.
Scroll to the connectivity settings and you will find both the network setup menu (which must be set correctly for your network) and the user/password table. Set the ADMINISTRATOR password there.

The pad is worn out! the only solution is take it apart, use a Q-Tip and rubbing alcohol, clean the circuit board and the rubber pad "where the up volume is" and clean the underside of the up button. that might get it working. To take the remote apart, remove the batteries, if you see a hidden screw remove it, next you will need a small flat end screwdriver bigger enough to fit in the crevice " almost snug" next! carefully pry it "clockwise" because there are hidden clips, don't worry if some of the clips break "unavoidable"

Hi, most certainly it will.

There should be a VCR DIN attachment at the back, and monitors hould have been installed or delivered with a cable for this din connection to get several video in and out to BNC bajonet, and audio out for plugging to the bosch recorder.

I have several used or new of this dvr´s or cable´s if youre interrested.

Try taking some free time and reading to children at your local library, kills boredom and helps your community.

The most obvious reason is an overheating issue in the Power Supply board. There are other ideas here, but you need to take it to a television engineer to diagnose https://www.google.com/search?q=television+will+suddenly+turn+off+every+4+minutes ..