Bosch Logo

Bosch Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 3K Products
  • 89K Answers
  • 3M Views
0helpful
3answers

My dishwasher gets stuck with one minute remaining

Hello,
Welcome to FixYa.
Based on your description I'd say the issue actually is with the control...unfortunately. This is likely within the electronic timer/control, specifically the heater relay solder joint. ( a faulty flow switch, ntc or heater can also cause this, but not very probable ).
If you feel capable of checking this on your own, there`s a way to visually inspect the control yourself...it really isn't very complicated. Copy & paste this link (or click on it if it will respond) to your toolbar (explorer bar ?) and you'll see my complete solution for this issue.
http://www.fixya.com/support/t8763034-good_afternoon

I also wanted to add, depending on your model and serial number Bosch issued a recall on some of their units. Here's a link you can use to check up on your specific unit.
http://microsites.boschappliances.com/safetyrecall/dishwasher/
Good luck.
Regards,
Macmarkus :)
9/28/2022 7:33:23 PM • Bosch 24 in.... • Answered 15 hours ago
0helpful
3answers

Bosch dryer error code E90

Had a E90 fault,bosch condenser dryer found if I disconnected pump plug on the pcb mounted rear rhs of machine, rear connector with 2 red wires, fault would not be present and dryer would run, removed pump cleaned, and spun by hand, reassembled and operated correctly
9/26/2022 3:20:43 PM • Bosch Washing... • Answered 2 days ago
0helpful
3answers

Laundry detergent

Why do you want to use a special detergent??? Tide works fine! You just need to use about 1/4-1/2 what is used in the American machines. Now if you really want some exceptional laundry detergent like we use in Europe, buy Persil (google it).
9/22/2022 11:34:56 AM • Bosch Axxis WFL... • Answered on Sep 22, 2022
0helpful
3answers

I have a 18 volt nI cad Bosch charger .can I get it repaired and by who

Have you tried a tool repair service? My husband is always seeking advice from the tool professionals. Due to constant use, his chargers stop working often and, although he is a handyman himself, there are times when his own knowledge isn't sufficient. bourgetbros com
9/22/2022 5:10:03 AM • Bosch Drills • Answered on Sep 22, 2022
0helpful
3answers

Unable to locate a replacement battery

You can get a replacement 9.6v bosch battery here

bosch battery
9/22/2022 5:03:52 AM • Bosch & 9.6V... • Answered on Sep 22, 2022
0helpful
1answer

The panel on my one year old Bosch microwave is out. I can barely read numbers. What do I do?

Hey Myrna, can you please come again with your model number?
9/20/2022 8:47:32 PM • Bosch Microwave... • Answered on Sep 20, 2022
0helpful
2answers

Bosch shu5302uc - overfill pump wont quit running

Have you tried to shut down the breaker for the unit and turn it back on ??
9/17/2022 8:51:59 PM • Bosch 24 in.... • Answered on Sep 17, 2022
0helpful
2answers

Delayed start says H2 won't stop running...please

Hello, Welcome to FixYa. On Bosch dishwashers with display such as yours the 2H indicates the cycle wash time is exceeding two hours and it should not. This is typical of a heating error so the cause must be determined. The question must be asked, is it a heater, a flow switch, an NTC or the actual control ? I can also tell you most times it is the control. I am presently on my iphone and as such don't have access to my files but if you check out my profile under dishwashers you will find a detailed explaination of how the check. Look specifically for units that show "1" and run & run. You will also find a link to the Bosch website on info regarding a recall which relates directly to your model and said issue. Otherwise I will post more info for you in the AM . Regards, Macmarkus :)
9/17/2022 8:39:32 PM • Bosch SHU5316UC... • Answered on Sep 17, 2022
0helpful
1answer

What do the symbols on the machine mean on the WFD 1060 bosch washing machine

Try this website. I explains the most common symbols Bosch use. https://www.bosch-home.co.uk/experience-bosch/using-your-appliance/washing-machine-symbols-guide#/Togglebox=8805164-8781535-1/
9/17/2022 9:42:48 AM • Bosch Washing... • Answered on Sep 17, 2022
0helpful
4answers

Bosch WFD 2473 - wont spin. I've taken out the

Even if the pump is not working, then so long as there is no water in the washer, it should spin
If it does not, then I would suspect the motor brushes are worn out.
You need to remove the motor to check the brushes, if they are less than 2 or 3 mm long then they need replacing.
I do not think the washer you found is off the pump,more likely out of someones pocket.
Hope this helps with your problem.
9/14/2022 5:51:40 PM • Bosch WFL 2063... • Answered on Sep 14, 2022
0helpful
1answer

When I try to start a bosch nexxt 300 washer it buzzes 3 times and doesn't start

Check your door switch.
9/14/2022 6:33:00 AM • Bosch Washing... • Answered on Sep 14, 2022
0helpful
1answer

Bosch fridge freezer keeps beeping while I'm waiting for repairing

You could unplug it, it is as you describe, malfunctioning and is not cooling. Unless the internal temperature is correct of course, then it is a waiting game. The alarm cannot be dissabled.
9/13/2022 6:52:03 AM • Bosch... • Answered on Sep 13, 2022
0helpful
1answer

Good morning. We have a Bosch Series 4 Combi Fridge Freezer model WPLY-194-B610 that started making a very annoying beeping sound since wednesday. The fridge is now also not cooling the contents anymore, even though the freezer is still working. We've tried a few settings as per the manual but nothing helped. The fridge is still new. Please can you assist.

As the fridge is still new and presumably under warranty, if the remedy to the problem isn't to be found in the manual, your next call should be to inform the supplier of the problem and ask for a solution. Your contract is not with the manufacturer but with the retailer/supplier and in return for a parcel of money you have the right to expect a fridge that doesn't beep and does keep the contents cold and remains trouble-free for a reasonable time.
9/13/2022 3:19:32 AM • Bosch... • Answered on Sep 13, 2022
0helpful
2answers

Oven thinks probe is connected when it is not and

We have the same problem every time the power goes out. We have to plug in the probe and then turn off the circuit breaker to cut the power to the oven. Then we turn the power back on with the probe still connected. Then we turn the dial to bake and remove the probe. It usually works on the first try, but sometimes it takes a couple tries.
9/13/2022 12:08:29 AM • Bosch HBL5460UC... • Answered on Sep 13, 2022
0helpful
1answer

E47 error code Bosch washing machine

Hi Adrian. this is all i can find, Bosch Washing Machine E47 Error - Heat Sink on Motor PCB Fault

Description:

Heat sink on the motor control module is broken.

Action To Take:

  1. Replace motor control module.
  2. or go to this link it will give you all the codes.
  3. https://appliancefault.com.au/faults/washing-machine-faults/bosch-washing-machine-fault-codes/
9/12/2022 10:55:17 PM • Bosch Washing... • Answered on Sep 12, 2022
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Bosch Experts

Marvin
Marvin

Level 3 Expert

85240 Answers

Brad Brown

Level 3 Expert

19127 Answers

john h

Level 3 Expert

27886 Answers

Are you a Bosch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...