Blueant Recent Questions, Troubleshooting Help & Support

Replace them. The internal battery is failing.

You told the tablet to find the ear buds, but you didn't tell the ear buds to shake hands by pressing the button on the ear buds. https://www.google.com/search?q=blueant+minipump+2+bluetooth+earbuds+pairing+mode Pairing Bluetooth Devices Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks. Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is. Roughly speaking though. Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever. With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically. When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes). Posted by ADMIN... on Nov 19, 2016

Question edited for clarity. How do I change the language on my BlueAnt st3? November 2, 2021 by anstoall2021 How do I change the language on my BlueAnt st3? From off, press and hold the On / Off button until the Bluetooth® indicator turns blinking red/blue. (The kit is now in pairing mode). Please be patient because the Commute 3 has 12 languages and it will cycle all available languages. How do I reset my BlueAnt ST3? Reset the BlueAnt device. Press and release the "Vol +," "Vol -" and "Multi-Function" buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list. How do I remove a BlueAnt pair list? On your phone bluetooth menu, search for devices and select BlueAnt ST3 then enter 0000 as pincode. Press the MFB until the LED blinks red/blue. Note: Blackberry and Smart phone owners please refer to section F of user guide. Alleant Phonebook transfer will be initiated. How do I pair my Supertooth 2? Pairing Mode. Turn on its Bluetooth function then execute a Bluetooth search so that it will be able to search and find your Supertooth II. When the phone displays the list of the Bluetooth devices it has found, select the name of this kit (Supertooth II). 5. When the phone asks for a passcode, enter "0000".https://www.google.com/search?q=blueant+st3+change+language..

Yes, you can use the rechargeable battery of same value.

Have you tried resetting the Blueant Z9i? You push the Volume Up, Volume Down and Blueant buttons all at the same time (with the device on). This will eliminate all paired phones, then re-pair with just your phone (hold down Blueant button for 6 seconds or so to enter pairing mode).

I would pair the device with anohter model of phone and see if the issue carries across, by doing that you can isolate the specific source of the problem (phone or device). Do you happen to have a blackberry?

1. If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
2. Hold down "Vol " and the green Multi-Function button until you hear a loud siren/distinctive tone.
3. The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
4. The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.

You will now need to re-pair your phone with your Supertooth 3.

Sorry but you failed to mention your OPERATING SYSTEM and what software version you have now?? A

It will be invisible. You must put the device into "find me" mode (paring).