Blanco Ovens - Page 4 - Recent Questions, Troubleshooting & Support

You need to replace the oven temp sensor which is located in the oven.

Ovens | Answered 22 hours ago

See if the La Germania manual I posted on a ggogle drive will help you:

Ovens | Answered Yesterday

Ovens | Answered 2 days ago

Service 17

  • What's the cause? SD card not initialized
  • Remedy? Clean the existing SD card or use a new one

They are so high tech I would suggest you call in a service engineer,

Ovens | Answered on Sep 22, 2020

So I found the service manual for this model.

The list of codes is on page 105. Code E34 is simply listed as contact customer service. Which is not really all that helpful in diagnosing the problem. Have you tried to reset the oven? Disconnect the power cord for 2-3 minutes and trying again? If this doesn't work, given the general code, you should call the customer service number in the manual.
Hope this helps.

Ovens | Answered on Sep 22, 2020

What kind of brand of oven that you are using? There are two types where you can you can use your broiler.
*Low Broil: There are 2 broil elements. In low broil only the inner element is on.
High Broil: There are 2 broil elements. In high broil both the inner and outer are on.

Ovens | Answered on Sep 20, 2020

At the back of the instruction book should be the contact details for Argos customer service.

The products sold under the Cookworks range are made by various manufacturers for Argos, it's one of their own brands.

Ovens | Answered on Sep 19, 2020

no question gets no answer

Ovens | Answered on Sep 16, 2020

The oven is probably in auto mode, reprogram the timer for manual operation normaly symbolised by a image of a hand

Ovens | Answered on Sep 15, 2020

I would have a service engineer look at it for your safety.

Ovens | Answered on Sep 15, 2020

Page 53. Error codes are numeric. 'MR SPD' is something speed, looks like 'motor speed' from the manual. Press CTRL+F and type in 'speed', press enter.

Ovens | Answered on Sep 11, 2020

seems its a mystery oven doesnt it now?

Ovens | Answered on Sep 05, 2020

Fan speed is too low or Hall effect sensor is defective.

Ovens | Answered on Sep 03, 2020

other than checking the door seal itself, make sure its intact and door closes properly. make sure door' doesnt spring back open after closing does the opening along sid look to be even all the way up the side. maybe the oven door opens more than 90 degrees?? if it does id look into replacing the door hinges

Ovens | Answered on Sep 03, 2020

Not finding what you are looking for?
Blanco Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top Blanco Ovens Experts

ray gallant

Level 3 Expert

69269 Answers

Steve F

Level 3 Expert

1360 Answers

Tom Chichester

Level 3 Expert

57312 Answers

Are you a Blanco Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides