Black & Decker Food Mixers - Answered Questions & Fixed Issues

This is so weird. I have the exact same serial number for my Camfield mixer with the same model (I'm guessing from about 1955-57). I wonder if they just put the same serial number on for products created at the same time. I thought 6404 was really low. Did you ever find replacement beaters? Mine have rusted. This was my mother's mixer and I just have a fond place in my heart for it.

I find no current sources for that battery pack.

41B030AC18301 9724

I believe this is a two cell lithium assembly for 2.4V. If your handy and can open the pack without damage it may be possible to get replacement cells and rebuild the pack.

I searched for replacement beaters for Blacker & Decker SM-100 type 1 (SM100) electric stand mixer for years. I found the Sunbeam Mixmaster Mixer Replacement Beaters for stand mixers, item 4955, at a large Ace hardware store. They were priced over $16.00, so you may consider buying a new stand mixer. The beaters are the correct length, snap in and grip correctly even though the ends are curved like a half ball rather than flat as the originals. The beaters turns well but I haven't tested them with the bowl because I need to find the turn table that I have in storage. The beater set was design ed to replace parts for Sunbeam stand models 2355-1, 2356-1 and 2360-2.

This may be too late to help you, but we have a full B&D SM-100 mixer set (large bowl, extra beaters, etc.) on which the electronic motor control just failed. Would be willing to buy your mixer or sell you our parts, including bowl, whichever would suit you best. email to [email protected]

First I would check the yellow pages or my chamber of commerce for a reputable dealer or repair station. If that doesn't work, try https://www.ereplacementparts.com

First I would check the yellow pages or my chamber of commerce for a reputable dealer or repair station. If that doesn't work, try https://www.ereplacementparts.com

Unfortunately, modern small appliances are considered "disposable" by the industry. So there are no "better made" parts. The best you can hope for are the same as what was originally installed. Try https://www.ereplacementparts.com

First I would search the yellow pages or call my chamber of commerce for a dealer or reputable repair shop. If that doesn't work, try https://www.ereplacementparts.com

First I would search the yellow pages or call my chamber of commerce for a dealer or reputable repair shop. If that doesn't work, try www.geappliances.com/ge/parts/

First I would search for a dealer or reputable repair shop. Check the yellow pages or call your chamber of commerce. If that doesn't work, try www.geappliances.com/ge/parts/

I don't know that mixer , sometimes a screw is hidden under the start button, see if it can be prised out without damage to the switch.

http://www.shopyourway.com/manuals/70222

Hi, replacement beaters can be found at amazon, click here and take a look: Amazon com hand mixer beaters. Wish you best of luck. Ned

Hi, replacement beaters can be found easily on amazon, click here and take a look: Amazon com hand mixer beaters. Wish you best of luck. Jerry

I do too. did you find them?

Each beater may be shaped differently and only will click into its appointed port. There may be a picture on the mixer showing which side to put each beater.

The Black & Decker website is a place to do that.

I can't find a manual for the MX55 online, Suzanne, but looking at the picture of it I found on Amazon and based on the manuals for other B&D models, it looks like you should have two slightly different beaters: one with a collar and one without and it's very important that each beater go into the correct hole. The one with the collar should go into the left hole (looking at the bottom with the holes at the top) and the one without a collar into the right. The other manuals say "insert each beater and, if necessary, turn it slightly until it locks into place." I hope this helps. Good luck!

Hand mixers are cheap these days so may be time to change.

Does it work on liquidy content? If it does the reason for not working could be the mixer too thick for its power and may burn motor.