Binatone Lands Phones - Page 3 - Answered Questions & Fixed Issues

Your keypad must be replaced.

Binatone Lands... | Answered on Jun 05, 2016 | 86 views

The model number for your cordless phone is shown on
a small sticker underneath the battery in the handset --
enter this number at to get a free
copy of the User's Manual.

Good luck!

Binatone Lands... | Answered on May 14, 2016 | 73 views

  • 1. In standby mode, press (intercom).
    • • Intercom is established immediately if there are only 2 registered handsets.
    • • If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed.
  • 2. Press the handset number you wish to call or press * to call all handsets.
  • 3. Press (Talk) on a called handset to answer the internal call, where both internal callers can talk.
  • 4. To end the intercom call, press (End/off) on either handset.

Binatone Lands... | Answered on Nov 27, 2015 | 111 views

What model is it?

Binatone Lands... | Answered on Oct 23, 2015 | 61 views

You should read user's manual.

By the way, don't ask twice. Wait for some time till you get a proper answer;
if you feel that the answer is not the one you are askin for or some time has passed without one, reformulate your question.

Download manual

Binatone Lands... | Answered on Oct 22, 2015 | 47 views

You should check user's manual. If don't have one, download it from here

Download manual

Binatone Lands... | Answered on Oct 22, 2015 | 155 views

Check for dialing tone by pressing 'Talk On' phone button.
If no tone, check cord at base station and the phone socket is correctly plugged in at both ends using the original cord supplied.
If still no dial tone, check the phone at another phone connection to establish if either the phone or the line is faulty. Address for
Binatone support at this link:

Binatone... | Answered on Jun 29, 2015 | 382 views

Instructions if you need to register handsets to the base:
You can register additional handsets to have up to five handsets per base unit, with each handset's number (1 to 5) shown on its display.
1. Press and hold <PAGE> on the base station for more than five seconds to put the base station into registration mode. (Note: there is no feedback to know it is in reg mode.) It will stay in registration mode for about 1 minute. So complete following sequence within this time. (It helps if handset is kept very near to the base during this).
2. Press <MENU> and <UP/DOWN> on the handset to select REGISTRATION.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> to confirm, and the display will show SEARCHING. If the handset registration is successful, you will hear a confirmation tone and the <antenna icon> will stop flashing. This may take a short while. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If thehandset registration is unsuccessful, the <antenna icon> will still flash and the display will return to ' REGISTER', so you will need to repeat registration process.

Binatone... | Answered on Mar 21, 2015 | 296 views

You may have accidentally pressed the Mute button. Undo as below
Mute a Call:
You can talk to someone nearby without letting the caller hear you during a call. During a call: Press <C> t o mute the microphone and "MUTED" will display on the LCD.
Your caller cannot hear you. Press <C> again to unmute the microphone.

Binatone... | Answered on Mar 21, 2015 | 274 views

Adjust Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece or speakerphone volume
During a call: Press <up/down> to select volume 1-5.
The current setting is displayed. When you end the call, the setting will remain at the last selected level.

Binatone... | Answered on Mar 21, 2015 | 229 views

To extend the number of rings before your phone goes into the answer message option, change the settings for Answer delay option as described below.
You can set number of rings before your phone answer message kicks in. You can set answer message to begin after 2, 4, 6 or 8 rings.
1. Press <Menu> and up down to select ANS Machine
2. Press <OK> and <up/down> to select TAM Settings
3. Press <OK> and <up/down> to select ANSWER DELAY (OPTIONS: 2, 4, 6 OR 8 RINGS)
4. Press <OK> and <up/down> to select to select desired delay.
5. Press <OK> to confirm.

Binatone... | Answered on Mar 21, 2015 | 318 views

Most of the newer phones have a feature that quiets the ringtone when you touch the phone or move it. You can deactivate this feature in the settings menu. I hopes this helps you..

Binatone... | Answered on Mar 21, 2015 | 319 views

check that the ring tone in on usually located on thr side of the phone

Binatone Lands... | Answered on Feb 25, 2015 | 161 views

CLI or calling line identifier is usually controlled by your carrier not by the telephone device. suggest to call your carrier /telephone line supplier and ask them to enable CLI

Binatone Idect... | Answered on Feb 23, 2015 | 150 views

If you need a manual, brochure or information about any product all you have to do is go to the search engine you use to find things on the internet. Type in the make, model and perhaps the year of manufacture. Hit the search button and you can almost always find the information you are looking for. Companies don't want to pay employees to sit and answer phones all day, so they provide manuals, etc. on-line to save everyone the trouble. Just print it off and you are good to go.

Binatone Talk... | Answered on Feb 19, 2015 | 98 views

Binatone Lands... | Answered on Feb 14, 2015 | 139 views

Contact Looking For Help for assistance.

Motorola Mobility Support

Binatone L403... | Answered on Feb 13, 2015 | 68 views

Not finding what you are looking for?
Binatone Logo

Ask a Question

Usually answered in minutes!

Top Binatone Lands Phones Experts


Level 3 Expert

85239 Answers


Level 3 Expert

8549 Answers


Level 3 Expert

2946 Answers

Are you a Binatone Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides