Binatone Lands Phones - Answered Questions & Fixed Issues

how to use step by step:

Binatone Lands... | Answered on May 18, 2020 | 48 views

Hi, Am Levy And here to show where you can find the user manual for binatone idect vantage, I will give the link to where you download or use it online either is your choice.

Binatone Lands... | Answered on May 05, 2020 | 48 views

Binatone Lands... | Answered on May 05, 2020 | 50 views

Binatone Lands... | Answered on Mar 26, 2020 | 64 views

Possibly similar model 2102 free instructions:

Binatone Lands... | Answered on Feb 14, 2020 | 85 views

Binatone Lands... | Answered on Oct 19, 2019 | 766 views

Very old phone, so search on internet using and Internet Archive showed several models that had manuals stored on the Internet Archive web archive free service.

Not sure which phone is yours:

Binatone Lands... | Answered on May 10, 2019 | 104 views

For the 1700, this model does not have a speakerphone. You would need to buy a different phone. Large LCD display and big buttons for ease of use Caller display enabled Up to 300 m range 20 contact phone book GAP compatible

Binatone Lands... | Answered on Apr 16, 2019 | 1,713 views

From Manual:
To check whether a handset is registered, make sure mains power to the
base unit is switched on and the handset is within range. The handset's
display should show its number and the <Antenna icon> should be steadily
on. If the display shows
again using the following process:
1. On the base station, press <MENU/OK> and <UP/DOWN> to show
REGISTRATION, and then press <MENU/OK> to put the base station into
registration mode. The base display will show "PLEASE WAIT" and the
base will stay in registration mode for about 2 minute, so the following
handset sequence must be completed within this time.
2. Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.
3. Press <MENU/OK> to display PIN?----.
4. Enter the 4-digit system PIN (default is 0000).
5. Press <MENU/OK> to confirm, and the display will show
PLEASE WAIT flashing.
If the handset registration is successful, the display will change to standby
mode with the new handset number and the <antenna icon> will stop flashing.
The handset will automatically be allocated the next available handset
number. If the handset registration is unsuccessful, the <antenna icon> will
still flash

Binatone Lands... | Answered on Mar 06, 2019 | 44 views

I assume you are able to answer inbound calls and chat using handset.

The machine may be in OFF state. The following directions to turn aswering ON. (direct copy/paset from the manual);

Press and hold STOP/ON/OFF for over 2 seconds to switch TAM on.

Then you can see "OGM 1" on the display and hear the voice prompt"Answer ON, Announcement One".

After this, the display will show the number of messages.
12:00 00/02 MSGS

You can download manual free from...

You do not have to register, but you will have to complete the typical "I am not a robot" challenge.

Binatone Lands... | Answered on Feb 02, 2019 | 46 views

Plug in a known good handset and line cord. The simpler the better. Disconnect all other devices and make a call. If it works, disconnect line cord at the good handset and plug line cord directly into binatone and place call.

Binatone Lands... | Answered on Jan 21, 2019 | 63 views

Remove base incline.


Binatone Lands... | Answered on Jan 16, 2019 | 46 views

Hi I have muted my binatone 2100 house phone and i can't take the mute off

Binatone Lands... | Answered on Jul 09, 2018 | 549 views

Did you connect another phone to make sure that wiring is not a problem? Because you visually check it, doesn't mean that there is not a problem.

Binatone Lands... | Answered on Apr 03, 2018 | 269 views

Not finding what you are looking for?
Binatone Logo

Ask a Question

Usually answered in minutes!

Top Binatone Lands Phones Experts


Level 3 Expert

85239 Answers


Level 3 Expert

8549 Answers


Level 3 Expert

2822 Answers

Are you a Binatone Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides