Bh Fitness Exercise & Fitness - Recent Questions, Troubleshooting & Support
How long does it take for someone to help me, on this site.
Hi. Hoping someone can help. I have a BH fitness pioneer classic model G6442C. It switches on fine but belt wont start turning and after few seconds “E1” error pops up. I have opened the box and tested and no power gets sent to the motor when you press start. “LED2” flashes once belt wont start. Any ideas anyone?
Treadmill Troubleshooting
Belt Adjusting
When the running belt shifts to one side or simply 'skids over' while running, run the machine at 3 mph for a few minutes to determine which side the belt is drifting towards, left or right as described below.
If the belt is drifting LEFT
# Turn the treadmill off and unplug from the wall
# Tighten the left hex head socket a ¼ turn
# Loosen the right hex head socket a ¼ turn
# Run the belt at 3 mph again for a few minutes
# Repeat the steps above as needed
for error codes and more check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
Not finding what you are looking for?