Belling Microwave Ovens - Answered Questions & Fixed Issues

This is the closest one I can find https://www.belling.co.uk/sites/g/files/emiian401/files/2021-02/3-belling-combi-microwave-im-final-120219-UserManual.pdf Look underneath, there may be a panel that exposed the drive belt and motor. They should be fully assembled apart from the placing the turntable and the ring on the drive. Lots of mentions here https://www.google.com/search?q=belling+bel-cj%2Fss25+manual ..

Yeah sounds like it's finished a cycle and the door has not been opened or not been cancelled off try cancelling all programmes and see if this helps.

https://www.espares.co.uk/search/mo1758411/microwaves/belling/cts211

Not available anywhere online. Contact Belling direct https://www.belling.co.uk/search/?search_field=BEL-CJss25&submit.x=0&submit.y=0 ..

You can get that at manualfox.com

https://www.belling.co.uk/find-manuals/ Find Manuals Belling

Painting cabinets is a great way to transform a room's aesthetic. No matter what finish your cabinets are, it is possible to paint over them if you take the appropriate preparatory measures. Follow these instructions to paint varnished cupboards.

You might have a power relay with contacts stuck in the closed position. I'd also check the door switches to make sure both the primary and secondary are not stuck closed. It's an unlikely cause, but I'd check them anyway. If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Temporarily, you can use a wine-bottle cork, cut to size. Mind your fingers!

Sometimes this can be done form the inside other than that you will have to take the lid of it

Visit the companies web site and download the manual.

Check mfg website or youtube

user interface board.

Possible that the fan has worn out,filled with dirt or possible that the leaf is rubbing against the frame.You can remove , clean and reset, with a drop of oil.

Possible that the motor has failed, remove the bottom and check for the voltage to the motor , is present the motor has failed, is not the board is faulty. check the belt drive.

some units have a child safety button lock feature.. You may have to look into your owners manual or look up the info on the manufacturers website for info?

go to www.retrevo.com and download . God bless you

Possible that this being a mechanical issue the fault must be observed in details if this is a foreign body that is obstructing the free movement of the door links. Unless this is done it cannot be confirmed.

You need to take the 5 screws out on the back and side oc the cover - 2 are a special screw head but if you jam a small flathead screwdriver in you can snap off the tiny stud so that you can now use a star driver. (be prepared to damage the screwdriver head). The bulb can be seen in the black plastic assembly surrounded by wires. You can just about unscrew the bulb with 2 little fingers - hey presto squeeze new build in and pug covet back on

Since the light and fan work the main board or the processor is working .Now identify the parts by clicking this link: http://www.espares.co.uk/advice/microwave/a/5/141/identifying-microwave-parts.html

As there is no heating please do not switch on unless you have confirmed the fault. It is possible that the Magnetron is faulty, the temperature cut off is faulty or the main capacitor is short. It is also quite possible that insect can get into the oven and create soft spots. When you switch on these will create a short and make the voltage jump and in the long run damage the magnetron.So Remove cover after disconnecting , check for dirt/moisture in the cabin, if so wipe clean and dry, check the magnetron and area clean and use an jet air to clean off. Check the wave guide covers, if food had depositedthen it must be checked or replaced.

See link: http://www.espares.co.uk/advice/microwave/a/5/1146/how-to-replace-a-microwave-guide-cover.html

Now keeping clear of the microwave, switch on, use a cup of water inside to test. If you notice any sparks shut off as the magnetron or the main HT capacitor can be faulty. replace with same type.If there is heating without any issues, you can use the microwave safely

Thank You for using FIXYA.