Idw604 error code e4
had same problem. Tilt dishwasher to the left and drain all the water (it will come out on the side). That's E4 solved. Now turn it on, E4 should not light up. If it does, turn it on and as soon as u do this, close the door. This won't activate the Trip Switch but will automatically turn the pump on. Good luck!
Belling G755 Cooker oven wont stay lit
I'll give this a go!
With a cooker like this, you depress and then turn the control knob, press the ignition button and continue to depress the control knob for a few seconds. This is because a device called a thermocouple is heated by the flame and you have to continue to depress the control knob so that sufficient gas flows to heat up the thermocouple. If the thermocouple does not get hot or stay hot then the gas valve is automatically closed - stopping the gas. The thermocouple is a 'flame failure' safety device. If the gas gets cut off then the flame goes out and the thermocouple goes cold switching off the gas valve automatically.
However, you are having to try and manually keep the gas going for a good five minutes.
I would think that there is either a problem with the thermocouple or the gas control valve!
7/30/2021 1:17:14 PM •
on Jul 30, 2021
Belling oven wont heat on any setting
Check if the timer is set? If that is okay, a failed element is the most likely cause. Disconnect the leads and check continuity with a test meter.
Belling Oven is Not
You can test whether your Belling oven
up correctly by turning the oven
on, setting the temperature
and letting it sit for five minutes. If the oven
cavity is not hot when you open the door, it is likely that your oven
element is broken.
Belling Oven Not Working? Here's How To Fix it
Not finding what you are looking for?